r/electricians • • 9h ago

Who hurt you.

Post image
159 Upvotes

Back to back minis, 1 hole strap, angle brackets and some bolts…


r/electricians • • 16h ago

W.v. Journeyman Electrician Exam Passed!!!

Post image
307 Upvotes

I started this journey as an apprentice a few years ago and then I left the field and recently decided to get back it's been 3 years since I studied wall going to school since August I managed to pass my exam for the first time Go. It's my foot in the door to get in the generator power. I'll be honest though I wasn't prepared for the test like I thought I was and my best advice is to definitely get the Henry's reference guide I had an old edition 2020 but it was still great for the 23 exam although there were some sections that weren't in the right but the majority were spot on. Thanks in advance and good luck to the rest of you guys. And to the guy that was in the parking lot with me in the white truck on November 10th I was in the red Nissan I hope you passed too brother good luck


r/electricians • • 10h ago

flashbang!

Post image
60 Upvotes

time for new probes 😬


r/electricians • • 6h ago

What do you look for in a "good" conduit run?

23 Upvotes

We all know a shit conduit run when we see it: couplings every 3', strapped to the extreme or like there was only one on the truck for a 50' run, no boxes/pull points, etc.

I got to thinking though, what do you think makes any conduit run "good"? Tons of guys will come up and look at an install and say "Oh, you shoulda..." and list what they would've done. I'm curious to hear what other do.

Me, I usually try to keep it as simple as possible. Least amount of bends and the straightest path.


r/electricians • • 12h ago

Since yall liked my last one so much here’s another🫡

Thumbnail
gallery
66 Upvotes

r/electricians • • 13h ago

Little house of horrors

Post image
56 Upvotes

I was asked to wire in a 9KW sauna on this facility. After looking at the electrical system I said "no"


r/electricians • • 18h ago

Good idea. Make batteries that generally don’t last quite as long as the ones you usually make. Market them as “PROCELLS” and sell them to supply houses where you know the consumers just need batteries, and they’re simply expensed to the company…

Post image
110 Upvotes

r/electricians • • 11h ago

Canada Job Opportunities

Thumbnail
gallery
22 Upvotes

Hi all

I am from the UK and currently assessing my options job wise and like the idea of going to Canada as I spent a few weeks there before overseeing a project and really enjoyed my time.

I have been a Controls Design Engineer for the past year and prior to that I was on the tools for 7 years building control panels, fault finding, carrying out field wiring of machinery and machinery installation on site (Photos as example)

I’ve taken a lot from being in the design but I want to get back on the tools. My question is, what terminology is used on job advertisements for control panel/machinery electricians in canada? Over here you would be called an electrical fitter or technician.

Thank you.


r/electricians • • 5h ago

My company owner is the common denominator to stability and growth issues

6 Upvotes

My company is a small 20 person electrical outfit. We do a lot of things many other companies of our size do not do such as power analysis, fluid testing, and MV overhead. It's neat little company but the owner still operates like it's a five man company. He has serious trust issues, inconsistent decision making, and a poor track record of actually training people for new roles. I'm lucky if I can get 10 minutes out of him for training and the words, "it's easy, now I gotta take this meeting" I've never done estimation and this is how my training has been. Now he is getting frustrated with the lack of progress due to me not really knowing what I'm doing. Over the last year my role has creeped into supervision which I left 12 years ago. Over the last three years we have turned over10 staff members in management or estimation due to him not supporting them and/or letting them do their jobs. He has no sense of boundaries and frequently meddles in things that he is paying someone else to do and be accountable for. I'm at a kind of crossroads now as I'm compensated very well but really don't want to be a manager or estimator for him. I don't want to leave as I don't think I will get the same level of compensation at another company despite having a journeyman, CDL, and two masters license. Another drag is him getting into AI to do everything and not teaching the fundamentals to verify what ChatGPT is spitting out. He's a high-energy intelligent individual and he's got a lot of great technical know how. Fundamentally he's a great guy with a lot of passion but he is just an absolute ADD/manic nightmare to work for. I understand the business is his baby and really it's all he has but he has to realize that that's not the case for the rest of us. We don't want calls at 10: 30pm about something that can't be dealt with until the next day anyway. I guess I'm just looking for thoughts and advice.


r/electricians • • 4h ago

I have to re take my CA state exam

Post image
5 Upvotes

Yeah I forgot to renew… not really bummed I’m glad to experience the online PDF/no physical book so I can let apprentice know not to worry about it.

But does anyone know how long the DIR takes to approve the application? Are they actually calling my previous employers? Or are they already on thanksgiving break lol!!!


r/electricians • • 1d ago

Dont Let Big Copper fool you, all you need is #8, hopes and prayers, and you too can power a whole home

Thumbnail
gallery
145 Upvotes

From a house my Brother just bought, and yes, i made sure to turn off all the breakers before i left.


r/electricians • • 2h ago

Main panel Tie in question

0 Upvotes

Question, I’ve always wanted to tie into a breaker lug (I think that’s what it’s called) using trico (I think), but for some reason most people dont do it. It’s trico -> Camlock so u pull neutral and the two hot legs and ground into a Distro box, but what is wrong with this I mean what can be so hard?


r/electricians • • 3h ago

Neutral screen cables

1 Upvotes

Can the screen of a 2 core neutral screen cable be used as an earth wire connecting to the MEN earth bar for a single phase 230VAC circuit in New Zealand?

I've found a 4mm2 neutral screen on a site and I want to use it.


r/electricians • • 1d ago

Finishing my basement. Wish I'd had a 3D printer when I was in New construction

Post image
273 Upvotes

I can't count the times I had wires damaged by the drywall guys. These should make my life easier. 😂


r/electricians • • 1d ago

$118.99 I got it! I asked the cashier for a discount because it was scuffed from the very bottom lol

Thumbnail
gallery
85 Upvotes

r/electricians • • 1d ago

The bane of my existence. Can you guys just NOT?

Post image
201 Upvotes

You'd think the odds would average out, but more often than not when I get to a new site, they never bother checking before connecting the utility transformer.


r/electricians • • 1d ago

If you hate making panel legends …

Thumbnail
gallery
50 Upvotes

Retired industrial electrician working on my kids fixer upper house nothing is labeled (of course)

So I did the typical thing draw a grid on cardboard box lid and start filling in the blanks

I was going to open up excel and start typing up a good copy when I thought maybe if I take a pic Google can do a rough draft for me

OMG what I time saver , this is my first draft took me longer to write this post


r/electricians • • 8h ago

Favorite FR shirt &socks from Santa

0 Upvotes

Do we have a go to on FR ? Darn Tough
Socks or is there a preferred brand ? Lookin at a Lapco Long tail on the shirts.


r/electricians • • 1d ago

Saying goodbye to a long time friend this morning. (It’s a bag)

Post image
193 Upvotes

I’ve had this bag for about 5 years… most of my career that I’ve been fully invested and eager to learn and grow. I switched companies in an effort to find a stable shop that I could hopefully ride out the rest of my career at and made an impression there and moved my tools to a backpack for whatever reason.

This week I got a new hire riding with me and the last guy they’ll hopefully have to hire for our service team of 5 sparkles. Him and I have been rocking and rolling all week and then I come to find out he lives 10 houses down from my family and I and he has the same goals of finishing his career at this shop too. More importantly this is his first job as an IBEW electrician…. But there’s one caveat 😂 he wears a tool belt as a service wireman 😂 he’s safe to say he made an impression.

I’ve given him enough shit about that and made fun of it as he throws his full hip belt and hammer on to go check plugs so I figured my TP-XXL could have right new home.

Bittersweet but how cool would it be if this dude and I started within a month of each other with the goals of retiring in our 50s and if both of us were able to retire within a year or so of each other

That’s my story for today. I hope you all have a great Friday!!


r/electricians • • 1d ago

Better way to organize my cart

Post image
64 Upvotes

What do yall use to help organize your carts. I hate how everything's thrown around. Do yall use bins, do you have a bucket for trash.


r/electricians • • 1d ago

Are these cable entries allowed to be used on a horizontal surface?

Thumbnail
gallery
10 Upvotes

California maintenance spark here. We bought this big ass Kohler gen set and these are the cable entries going to the exhaust emissions equipment bolted to the roof. Whoever pulled these cables through did not give a shit about sealing anything and now we are getting water in the engine compartment when it rains. In the meantime I slapped duct seal on it until they come back and make it right.

But now it's got me wondering. Are these cable entries are even designed to be mounted on horizontal surface, unprotected from the elements? When I looked em up online there is nothing specific about it. Just seems like a bad idea.


r/electricians • • 1d ago

How’d I do on my first sub-panel change?

Post image
29 Upvotes

r/electricians • • 1d ago

Just got sacked

59 Upvotes

Hey guys, as the title says I was just fired from my first job working heavy residential.

Here in Quebec, the pay scale is decided by your level of apprenticeship (apprentice 1 - 4, journeyman, master). This increases during the apprenticeship every 2000 hours. School counts for 2700 which I’ve completed. I withheld submitting my hours as how much you’re being paid is definitely one of the discussions the bosses have about who to let go. Big mistake, I was only there about a month and a half.

I’ll be applying for EI (I’m not eligible) and contacting my IBEW union rep and finally submitting my hours to the CCQ to be made apprentice 2.

I’d like just general advice, I’m pretty bummed and a little discouraged. I’m 30 and have never been fired in my life. I know it’s pretty common in the trades for people to be cut loose so I knew I wasn’t going to last years at the company but I was hoping I’d at least get to wrap up the project we’ve been working on. They said it was because they hired a bunch of electricians recently (true) and the project is about to be moved to another floor that requires less man power (kind of true) but I’m nearly certain it’s just an excuse and that I was too slow of a worker.

Thanks yall.


r/electricians • • 1d ago

Rough in house time opinions?

14 Upvotes

Roughed in and cut in a house by myself. I counted a total of 24 hours of working time start to finish. 3 beds, 2 bath slab house. Vaulted ceiling in living room. That's roughing in 23 potlights trims, all boxes , outside wall lights, 5 ceiling lights and smokes, pulled all circuits, pulled 4 runs of low voltage for tvs, HRV runs, t stat for furnace, Ac, and cut everything in 24 hours. Do you think that slow or a good pace? I know housing is never fast enough but I just wanted some other opinions. Thanks.