r/electricians • • 46m ago

It's kinda a hammer...

Post image
8 Upvotes

Custom made 1/16" titanium plate gorilla glued to base of M12 battery. Even if the batterie dies, I can still drive screws...


r/electricians • • 1h ago

Help identify a device?

Thumbnail
gallery
0 Upvotes

Anyone seen this before (see picture)? Customer sent the picture to me. So, no additional info at this time. Thanks.


r/electricians • • 1h ago

Anyone else see this?

Post image
1 Upvotes

The numbers are stupid and I buy...got alot of deck drilling coming up so f it. Anyone else with experience with this mofo? Happy whiskey Wednesday! 🫔


r/electricians • • 1h ago

I like this little guy

Post image
227 Upvotes

Barely feel it on my belt


r/electricians • • 3h ago

Main lug touching door? Just put tape over it I guess

Thumbnail
gallery
105 Upvotes

Saw this today


r/electricians • • 4h ago

It's not a burnt wire it's mouse poopies and pee.

Post image
1 Upvotes

This post is pretty much restricted to redisential. I've seen it posted many times, many responses, usually wrong. its almost always mouse poop, the heat would burn through the jacket of the romex, not just char it black all the way around. Here's a similar attached photo, insulated does some weird stuff,


r/electricians • • 5h ago

Here taking some basic electrical training for my new job, am I mentally challenged or is this actually impossible?

Post image
127 Upvotes

Thanks for any input!


r/electricians • • 7h ago

Does a Versi Tugger with Peyronieā€˜s disease tickle the jbox better?

Thumbnail
gallery
25 Upvotes

Apparently, I found the borderline limits of my brand new Greenlee Versi Tugger. šŸ˜”. The mistake may have been letting the excavator run the conduit without consulting me. Well ok, that’s my bad actually, but yeah he ran a nice zigzaggy trench with a couple 45s and short radius 90s in 2ā€ pvc. 285’ of 4/0 URD quadruplex was less than fun to pull, but the Tugger made it happen despite the scarring.


r/electricians • • 8h ago

Winter gloves set up

Post image
54 Upvotes

It's been all over here lately, and now I've had a couple of friends ask me personally what I do for winter work gloves, so I thought I'd share. I've worked in the cold A LOT, and it never gets less horrible. But this has made it loads better. Bulky gloves are obviously a no-go, and the nitrile-coated, fleece lined winter gloves just trap in moisture and make my hands even colder. So after years of just either suffering through it or working with bare hands in small bouts and them putting them back in gloves, I finally came up with this. I wear the normal, stretchy maxi flex-style nitrile-ckated gloves underneath a bulkier pair and then cut the finger tips out of the bulky gloves so that I still have dexterity.(Pictured below)I also put a hot hand inside of each of the nitrile gloves. World of difference. I don't know if big, bulky winter gloves are doable in other trades, but try putting on a lock ring, or fishing an 8/32 out of your pouch, or terminating a Cat 6 end without the fine use of your fingertips. This has been a game changer. Hope this helps!


r/electricians • • 8h ago

Second time in 2 weeks that someone has cut out the SWA on the 4th floor riser

Post image
433 Upvotes

As the title says, this is the second time in 2-3 weeks that someone (most likely from a different trade) has cut through the supply’s to Apartments on the 4th Floor. The first time they cut all of the SWA’s down off the tray and took them and also cut through all CAT 6’s for Intercoms, Fiber Optic Tubes and Fibre Wires for 1st and 2nd Incomers.

I believe the police were informed after the first incident. I’m genuinely at a loss for words. All the labor we’ve done is down the toilet. AGAIN.

- Irish Electrician


r/electricians • • 9h ago

No 1ā€ to 3/4ā€ reducing washer no problem.

Thumbnail
gallery
17 Upvotes

r/electricians • • 10h ago

Hi-viz rain jacket recommendations?

4 Upvotes

I need to replace my ol' reliable Tingley hi-viz rain jacket but one thing I never liked about it is how tight the hood fits. My head is too big to wear a beanie or cotton hoodie underneath the rain jacket hood. Just wondering if anyone has some recs at any price point.


r/electricians • • 12h ago

Solar self-install

2 Upvotes

Commercial JW who dabbles in resi side work. Power bill for my house is $250 a month. I've always thought about installing solar myself. Anyone do it? Can it be done on the cheap?


r/electricians • • 12h ago

I didn't know Hell uses electricity

Post image
7 Upvotes

"2nd FL Hell"*


r/electricians • • 14h ago

What kind of wire nuts are these?

Post image
122 Upvotes

r/electricians • • 20h ago

Any European Electricians willing to share pics of their toolbags?

11 Upvotes

Just curious what the daily toolbag setups our European brothers and sisters are rocking.


r/electricians • • 21h ago

Training new guys

5 Upvotes

My boss just recently hired three new guys, 2 of them have a couple months of experience on resi and the other kid did concrete for a summer. All three of them are under 20, I’m 29 and a 5th year and just recently got my journeyman.

I know that I don’t plan on staying with this company much longer but I know I’ll most likely be training new guys no matter what company I work for so I’m looking for advice.

I’ve been struggling with finding a good middle ground between babysitting and trusting them to do the tasks I give them, specially since I’m the only one on the job with more than a couple months experience. I do double check their work and make sure they understand the tasks before I walk away, the hard part is trying to do the shit I need to do when I’m getting questions constantly.

I know it will be less hectic once they learn more but what have yall found is the best way to train new guys, working with them while they do tasks or letting them do their tasks and come to you if they have questions?

Also I feel like I should add, the reason I’m trying to find a better way to do things is because after believing one of the guys knew how to make up switches and I watched him a couple times, I noticed every box I didn’t watch him on needed to be fixed. It was half of the main floor of the house… So now I have trust issues but don’t want to be the jack ass who doesn’t let you make shit up or hovers the entire day.


r/electricians • • 21h ago

Training new guys

15 Upvotes

My boss just recently hired three new guys, 2 of them have a couple months of experience on resi and the other kid did concrete for a summer. All three of them are under 20, I’m 29 and a 5th year and just recently got my journeyman.

I know that I don’t plan on staying with this company much longer but I know I’ll most likely be training new guys no matter what company I work for so I’m looking for advice.

I’ve been struggling with finding a good middle ground between babysitting and trusting them to do the tasks I give them, specially since I’m the only one on the job with more than a couple months experience. I do double check their work and make sure they understand the tasks before I walk away, the hard part is trying to do the shit I need to do when I’m getting questions constantly.

I know it will be less hectic once they learn more but what have yall found is the best way to train new guys, working with them while they do tasks or letting them do their tasks and come to you if they have questions?

Also I feel like I should add, the reason I’m trying to find a better way to do things is because after believing one of the guys knew how to make up switches and I watched him a couple times, I noticed every box I didn’t watch him on needed to be fixed. It was half of the main floor of the house… So now I have trust issues but don’t want to be the jack ass who doesn’t let you make shit up or hovers the entire day.


r/electricians • • 23h ago

NEC brush up

0 Upvotes

It’s been some time since i’ve read up on newer versions of the NEC so i feel a bit out of touch but what do you all use when you need to get updated with the NEC? I use to go to a local community college for instruction which is pretty cool but is there anything else out there that is helpful or better? Is there any online instruction?


r/electricians • • 23h ago

Passed my online journeyman in VA exam

3 Upvotes

Finally I passed for my second exam and it wasn’t that much hard.
My tip was: first I answer all questions that I knew or I thought I can found it fast then I came back to answer all those ones that needed more time to find the answer. I’m really good at it and I made it in really hard situation with tones of stress about in something personal. So I did it in like these conditions it means you can do it a lot better than me! When I passed I moved to Toronto, Canada.
Any advice to me !

Thank you

Good luck


r/electricians • • 23h ago

Service call today

Post image
95 Upvotes

Replaced disconnect, the thing literally crumbled apart


r/electricians • • 1d ago

Mini split install

4 Upvotes

Contractor here. I see a lot of electrical contractors near me offering mini split installs. Do any of you guys get your epa license and do installs? If so do you have any tips? Considering doing installs next year.


r/electricians • • 1d ago

It’s a beauty

Post image
118 Upvotes

r/electricians • • 1d ago

Update on the 3,4,5 method

Post image
168 Upvotes

I finally got it