r/e39 • • 32m ago

Does it sound like my chain guides are going

3 Upvotes

2002
99,000 miles
Original guides


r/e39 • • 6h ago

Quality of life tip for you guys out there digging around your engine bays: BMW adjustable hose clamps near perfectly fit into most universal drivers.

Thumbnail
gallery
35 Upvotes

Flatheads just generally suck. They slip in hard to reach places, round off, cut your hands and half the time you'll need a few swear words to get the job done.

Most locations there's a hose clamp you don't have much room or options.

The driver fits over the top and makes undoing quick and easy. A flathead can still do the final tighten or initial loosen if necessary, it's not always a perfect fit.


r/e39 • • 18h ago

What’s your favorite e39 trim?

Post image
32 Upvotes

Just switch to piano black, curious what most people like?


r/e39 • • 19h ago

Motornotlauf Problem

3 Upvotes

Bei meinem 523i habe ich seit ein paar Wochen das Problem das der Wagen immer in den notlauf schaltet. Als ich ihn ausgelesen habe kam ein Fehlercode von der Drosselklappe. Daraufhin habe ich diese ersetzt allerdings besteht das Problem immer noch. Ich habe keine Ahnung woran das liegen kann. Nach dem löschen der Fehler läuft alles super aber nach einer Weile geht er wieder in den notlauf. Eigentlich scheint auch alles normal das einzige was ich bemerkt als ich live Daten ausgelesen habe ist das der Drosselklappe 2 Winkel immer zwischen 47-50 grad schwankt und nie niedieger oder höher ist.
Falls jemand eine Idee hat oder das gleiche Problem schon mal hatte würde ich mich sehr über eine Antwort freuen.


r/e39 • • 19h ago

Remote locking won't work. Central lock button does.

2 Upvotes

My '97 540i is driving me crazy. A few years ago I replaced the failed GM3 with one from an E53 and recoded it using NCS-Expert + Dummy. Everything worked until recently.

Now the key fob will not lock/unlock the car or open the trunk. The central locking button on the console does work. Interior lights work... everything but the remote! (Locks work when using the key in the driver's door or trunk). Fuse 53 in the trunk is intact.

I've repeatedly tried the key resync procedure. New coin cell in the fob. The fob LED flashes ten times, but the locks don't cycle and buttons still don't work. On my spectrum analyzer there is a strong 315 MHz signal coming from the fob when a button is pushed.

Should I be looking at the antenna amp in the left rear C-pillar (FM reception seems to be normal), or just try another GM3? They are not as cheap as they used to be, at least on ebay... anyone have one at a reasonable price?


r/e39 • • 20h ago

new to me 528i

Post image
61 Upvotes

jet black with ac schnitzer front


r/e39 • • 21h ago

Radio Module

2 Upvotes

Hi there. Im haven’t an issue with my radio system the radio is not working and sometimes it works when i unplug and replug the battery.
I don’t know if its the amplifier or the radio module. But even so i don’t need both of them im asking if i can install some new screen that has bluetooth just to hear my music while driving.
Most of them that in the market has like the TV red,yellow etc pins not like the one that i have.


r/e39 • • 21h ago Heartwarming

Appreciation Post!

Thumbnail
gallery
133 Upvotes

still a work in progress but close to being finished


r/e39 • • 22h ago

Coolant got inside the headlight

Thumbnail
gallery
10 Upvotes

Any suggestions? This are 2003 perma sealed headlights


r/e39 • • 22h ago

I need help, I found the carpet on the rear sets wet

13 Upvotes

I have an E39 525i. I'm learning to do everything and so far I was really enjoying the car until yesterday I found the carpet on the rear seats wet, with a terrible smell.

Is this the vapor barrier? Should I change the it? What tape should I buy since the oem terostat 81 is not available?

Also, any tips to remove the smell?

I'm from Spain, sorry if my english is not very good.


r/e39 • • 23h ago

Intake manifold vacuum line removal M52tub28

Thumbnail
gallery
4 Upvotes

How can I remove this vacuum line with the orange gasket from the manifold? It spins in place but it's very difficult to pry out. The line also connects via a few hose clamps, which I removed, but the connections are so tough I could not get them out either. Please advise!


r/e39 • • 1d ago

Hi Guys

6 Upvotes

Is this a normal engine sound ?


r/e39 • • 1d ago

A very specific problem

6 Upvotes

Hello everyone, this is my first post on r/e39 and I am asking for help with a problem that started in my E39, 525d, 2003. I would like to apologise in advance because I am not too familiar with automotive terminology since english is not my first language.

So I started having problems when I put my car battery into another car so I could get it running and when I installed it back, the positive clam was a little loose. When I tried starting the car the car would lose all electricity and as a temporary fix I just wiggled the positive clam a little and it would work. After a while I tried fixing it by tightening the positive clam more but it was still a little loose. After my attempt of a permanent fix another problem started (this is what the post is about). The rpm and fuel gauge are not working anymore. Rpm gauge just sits on zero and does not move, but the fuel gauge sometimes goes to max and moves a little but a lot of the times it just sits on empty. Also the middle screen where you can calculate the consumption, I can’t calculate it anymore and all the consumption data from before is gone. I’ve also noticed that the language switched from english to german and if I try to turn off traction control the light for it doesn’t turn on. I haven’t had the chance to put the car on BMW scanner or icarly, but hope some of you can still advise what could be the fix. I am guessing that it has something to do with unstable power to the cars computer (but it drives fine). Btw I am no expert in electrical part of cars so please don’t judge my lack of experience.

I have a video of the rpm gauge and the middle screen also but I just don’t know how to post it yet.

Sorry for the long post and thank you:)


r/e39 • • 1d ago

NCS Dummy Experience.

Post image
6 Upvotes

Originally I just wanted to remove the hyper-flash on the switchback LED turn signals I installed, by setting the warm and cold monitors to off. Well came to find out that I can’t code that shit out because my car does not have LCM III or IV I believe since it’s Pre-FL. So back to the good ol resistor splice. Anyways, I did all this shit just to be able to code Double Pulse Hazards 😆 which is cool I guess and remove Cold monitoring on the LED high beams. I guess the real question is what is some other cool shit to code in this car that did not come factory? I’m having fun with it, looking into the window roll down with the fob rn. So just lmk whats some other options to enable.


r/e39 • • 1d ago

WTB E39 C Pillar Dome Lights in Black

Post image
4 Upvotes

Hey everyone! I am looking for a set of black E39 c-pillar dome lights. I am finishing my black headliner conversion and this is the last piece I need. If anyone has a set for sale, please let me know! Thank you :)


r/e39 • • 1d ago

suspension click

2 Upvotes

Does anyone know how to diagnose where clicking is coming from, its around the back and happens when in a heavily loaded turn or when jacking the car up (i have bilstein sport shocks)


r/e39 • • 1d ago

Please help BMW

Thumbnail
gallery
8 Upvotes

I was going to change the battery then the trunk slammed down. There is no thru access from the backseat, not even in the armrest. Anyone know how to get it open without damaging the frame?


r/e39 • • 1d ago

Change to Wood interior.

Thumbnail
gallery
64 Upvotes

Changed my Interior trim from the original Cubic ones to Vavona Wood. Love it alot i know not everyone is a fan of it but it looks so much better


r/e39 • • 2d ago

Steering box

12 Upvotes

Hey all, was wondering about the risks of tightening up the gears on the steering box. Steering wheel just feels a bit too boaty. Do people commonly do it? Does it have bad results? Just want to hear what the experts think before I give myself a bad day. Thanks! Have a Rev video for your troubles.


r/e39 • • 2d ago

540 Restoration Progress

Thumbnail
gallery
76 Upvotes

Finally got the bumper painted. Bought a set of LCI headlights off eBay. The adjuster needed to be replaced on one of them. Had the front upper and lower control arms replaced. There are a few trim pieces and new bulbs to replace before everything is done. I’m also replace the older Eonon radio with a newer one.

Might be the last set of repairs before I sell it. I’ve been thinking about selling my 540 and my daily driver Mazda CX-9 and buying a 2023 X5. The 540 sits in the garage most of the time and since I work from home, the Mazda doesn’t get much use either.


r/e39 • • 2d ago

01 Touring; Door lock broken, battery dead, remote not working

3 Upvotes

I´ve messed up a bit and hope someone here can help.

I left my car parked with the battery connected for way too long and now the battery is of course dead. I now wanted to take care of the car with a battery booster, however I can't unlock the car.

I tried to manually unlock the drivers door, as the battery is empty of course the regular central unlocking doesn´t work, so I tried to turn the key further to 90 degrees for the manual unlock, that however broke the door locking cylinder which is now spinning freely, more or less.

I managed to open the hood and to attach the booster there, however the remote never worked so even though the car theoretically has power, it´s of no use. I tried the door lock again in the hope of somehow activating the regular unlocking mechanism, to no avail.

As it´s a Touring there is no lock for the trunk, is there any other way of getting into the car or is my only option a locksmith that opens the door?

Thanks for any help!


r/e39 • • 2d ago

Looking for a second opinion before buying

Post image
21 Upvotes

I've come across a listing for a manual 540i with 260tkm that seems to be in good condition, but wanted to ask if there were any major red flags I (may) have missed before contacting the seller for a test drive.

Thanks!


r/e39 • • 2d ago

Slipping clutch? If so how much does it cost to replace(labor not parts)

4 Upvotes

r/e39 • • 2d ago

To Replace or Leave Alone

Post image
3 Upvotes

M62TU is at 208,000 plus miles. No codes. About undertake the TCG and VANOS seals.

I took them out before to change the check valves, gave them a quick spray with Brakleen and that was that. Since the solenoids will be removed, I wanted a general consensus whether or not these are a cause for concern.