r/e39 • u/HedgehogSenior9831 • 6d ago
A very specific problem
Hello everyone, this is my first post on r/e39 and I am asking for help with a problem that started in my E39, 525d, 2003. I would like to apologise in advance because I am not too familiar with automotive terminology since english is not my first language.
So I started having problems when I put my car battery into another car so I could get it running and when I installed it back, the positive clam was a little loose. When I tried starting the car the car would lose all electricity and as a temporary fix I just wiggled the positive clam a little and it would work. After a while I tried fixing it by tightening the positive clam more but it was still a little loose. After my attempt of a permanent fix another problem started (this is what the post is about). The rpm and fuel gauge are not working anymore. Rpm gauge just sits on zero and does not move, but the fuel gauge sometimes goes to max and moves a little but a lot of the times it just sits on empty. Also the middle screen where you can calculate the consumption, I can’t calculate it anymore and all the consumption data from before is gone. I’ve also noticed that the language switched from english to german and if I try to turn off traction control the light for it doesn’t turn on. I haven’t had the chance to put the car on BMW scanner or icarly, but hope some of you can still advise what could be the fix. I am guessing that it has something to do with unstable power to the cars computer (but it drives fine). Btw I am no expert in electrical part of cars so please don’t judge my lack of experience.
I have a video of the rpm gauge and the middle screen also but I just don’t know how to post it yet.
Sorry for the long post and thank you:)
10
u/mrki00 6d ago
very common, float is made of sponge and falls apart after years in diesel if I am not mistaken whole assembly needs to be changed
3
5
1
u/the_ssarb 530d 5d ago
The cluster has tank level dampening by design, that doesnt look normal to me. It can take up to a couple of minutes for a normal cluster to show a difference in the tank reading. Disconnect the battery and leave it off overnight. Bugs like these dont go off without a fight lol.
Context: i have repaired E39 clusters for 2 years
1
1
u/Prudent-Staff3191 1d ago
You should diagnose your battery/electrical supply first. If your battery is loose, or the alternator is undervolting the system it could cause chaos with the electrical systems.
If that isn't it you should scan your car with a bmw scanner, check the IKE, engine controller and the abs systems. Those seem like the most likely spots to find issues. Also check your fuses. As a bonus you could make sure the instrument cluster motors are functioning properly.
This is the official BMW e39 document on the instrument cluster, might be useful: https://wds.psjr.org/en/e39new/zinfo/BAU0995FB-001621102.htm
Good luck, hopefully it's a simple problem becuase electrical issues can be a massive headache.
5
u/hubbi959 6d ago
This really sounds like some problem of the instrument cluster logic. Did you try to disconnect the battery overnight and see if the problem disappears? After disconnecting the battery you can also put the clamps together shortly (or + to some bare metal), to drain as much of the energy which is left in the devices.