r/diyelectronics • u/LessonInSin • 6h ago
r/diyelectronics • u/mindstormer12 • 9h ago
Question Microwave diode failed, need a 9V battery connector to test?
Microwave fails (powers on, does not heat). Diode failing seems to be a common culprit. Completely new to electronics but I prefer DIY in general--what's a recommended general-purpose way to test this? I consider this "general home electronics DIY."
This video suggests using a 9V battery and battery connector and presumably you'd remove the diode using insulated glove and screw driver (both don't have). Have an old random multimeter and alligator leads.
Do you simply suggest purchasing 9V battery connector, insulated gloves (recommendations?), and insulated screw driver (recommendations?) or can get by with something more common for general home electronics DIY (or maybe the 9V battery connector is common enough to warrant a purchase? I just don't want to accumulate single-purpose clutter.
r/diyelectronics • u/EmbarrassedOne2329 • 10h ago
Project Built this Elevator Fault Monitoring Device
Few months ago I built this Elevator Fault Monitoring Device for a company that maintains Elevators, they weren't able to get it in the market and now I'm left with an unfinished project.
What it does: every elevator panel has configurable I/Os, and some of the Outputs can be configured to trigger HIGH/LOW when a fault appears, that signal I use to notify a cloud server and also to send via telegram to the Manager. This was to help them get notified before the administrator of the building notifies them, also sometimes they provided service to the building who haven't payed so they can also generate reports and be notified if the elevator that has a fault have not been payed.
As I said above they weren't able to sell it and now I'm stuck with a unfinished project, I was thinking if it was worth to open source it so someone else who can see this project might be interested.
This post is not intended for marketing or sales!
r/diyelectronics • u/GreatestBluestHeron • 11h ago
Question Where are the electrical leads to the light?
I'm trying to design a hanging light that has a similar wire to this one. I'm confused on how the wires are so thin and strong(thought it would be braided steel) and yet still electrified and maintain safety guidelines for voltage. I know the light is probably only getting 12V with the conversion in the base from 120V. But my basic searches for pendant light wire only yields braided steel or fat electrical leads.
r/diyelectronics • u/Infinite_Reply793 • 14h ago
Discussion budget air purifier: is this a good idea and would you buy this ?
I'm thinking of making an air purifier
air purifiers with decent airflow easily cost around 9k to 15k , while the 5k one won't be able to clean ur room properly.
So, I’m planning to assemble and sell a minimal airflow purifier using a genuine branded cylindrical H13 HEPA filter and a 150mm exhaust fan, sealed with heavy duty industrial foam and cloth tape. No expensive plastic shell or app bloat just maximum CADR(clean air delivery rate) per rupee, also you can easily swap in standard filters later if you want. Also meter in that , so u can check what's the aqi.
Looking for market feedback before making a few units:
1.Would you actually buy this if I sold it to you?
2.What are your main questions or concerns? (Safety, aesthetics, fan noise, durability?)
3.Would you buy this specifically for small rooms?
4.What budget would make this an instant buy for you?
5.How essential is an air purifier in your daily life right now?
6.Which features do you actually care about (e.g., fan speed regulator, top safety grill, PM2.5 meter, cleaner outer finish)?
Please let me know, it would be very helpful .
r/diyelectronics • u/Civil_Stock6483 • 15h ago
Discussion Advice
Advice
I started learning on arduino i got the kit, but I don't know how to continue actually, i mean I don't have a specific goal, how would I know that I learned?
If anyone knows anything would help please tell me
r/diyelectronics • u/kornerz • 20h ago
Reference Do Not PWM a Peltier Module.
Recently I've found an interesting article - on how Peltier modules are vastly more inefficient if driven by raw PWM.
In short, resistive losses rise quadratically with applied voltage and actual Peltier cooling only rises linearly. So it's beneficial to feed Peltier modules with filtered DC.
Having my own Peltier setup (an over-engineered wireless phone charger in car with 80W peltier module and a 80mm PC fan), I've decided to test.
And indeed, raising PWM frequency to 20kHz and adding an LC filter ( 10uH + 2x 220uF, what I've had in spare parts) after the MOSFET significantly reduced self-heating of the Peltier module: with the same cold side target of 17C, hot side temperature dropped from 40-42C to 27-28C, which is quite significant.
EDIT / TLDR: regulate as PWM, but apply filtering so that the module itself receives DC-like signal with no full 0..Vcc ripple if possible.
LC filter in question: a basic low-pass LC filter, inductor in series followed by a capacitor parallel to the load, https://i.imgur.com/JHwGlIn.png
r/diyelectronics • u/TheSprigganDragoon • 20h ago
Question Looking to make an LED accented gift and definitely in need of direction.
reddit.comr/diyelectronics • u/I__am__anonymous • 21h ago
Discussion BMS and Charger for commercial product
I am looking for guidance in developing a battery management system for a commercial product, since I am the only hire at the start up with an electrical engineering background.
This is my first real job, and unfortunately without a mentor. I've already developed multi layer PCBs, and my thesis was on SoC estimation using a Kalman Filter, just so you have an idea of where I am at.
For the product, I suggested to use hobby drone batteries (6s LiPo), since they are cheap and available everywhere. The system specifications are below:
\- 24 V
\- 8 A nominal
\- 20 A peak
\- 1.5 Ah, will probably go upto 3 Ah for faster charging
I'm not sure if these batteries even qualify for certifications in our product (industrial automation with no direct human contact), or how to even go ahead with them. We are based in the EU.
Im expected to take care of the BMS and charging, but the algorithms will be included in the chips. I've selected the BQ40Z80 and the BQ25756E.
Tldr: I need to develop the electronics for a purchased battery pack. Looking for any tips, things to watch out for, how to do this safely etc, since I don't really have a mentor. Deadline is tight in my opinion (1 Month), but what do you think?
r/diyelectronics • u/GOOSESLAYER22 • 23h ago
Question Courses offered for learning basic electronics
Hi, I'm a first-year biomedical engineer in Canada, and I know that a lot of biomedical applications have electronic components to them. I've been seeing a lot of videos on Instagram of people building cool little projects like desk buddies, moisture sensors for plants, and Spotify displays on what appear to be ESP32s. (examples below) I'm mainly looking to learn something over the summer when I'm off school because I find this topic interesting, not necessarily for career purposes. I'm not familiar with electronics at all whatsoever, so I'm a little lost as to what I should be looking up to find out about, both what materials I need to order and courses that I can take to actually learn how these things work. I have a few main questions:
(To your knowledge) Are there any colleges/universities in Canada that offer a class/certificate on this specific topic? Can it be taken online?
Are Arduino, Raspberry Pi, and ESP32 the same thing? Is one thing more valuable to know than the other?
What should I look into buying in order to familiarize myself with this topic? I'm aware there are different sensors and stuff. I'm willing to pay for the education and the pieces.
I'm just completely clueless in this topic, so any guidance is appreciated.
Example one of what I've been seeing
Example two
r/diyelectronics • u/Excellent_Brick2893 • 1d ago
Need Ideas Projects that can be made with e-waste/from old tech?
Just noticed even Pi zeros going for 100+!
With the price of new hardware going up, does anyone have any fun DIY projects that can be made from e waste or just old tech (computers, cameras, phones, dvd players, etc)
Or if there’s certain parts that can be useful to salvage from old tech. I’ve found thrifted some old electronics for cheap and I’m hoping I can at least salvage some parts for projects! What kind of things are good to look for? Does anyone have experience with this?
r/diyelectronics • u/m4rkw • 1d ago
Project l0destar v4.0 prototype, now with a 64Mbit flash chip for telemetry buffering
This should make it pretty much bulletproof to coverage gaps, it buffers up to 60s in RAM and then spools to the chip after that. 64Mbit is enough capacity for around 12 hours of data at 1 event per second. To avoid excessive wear it just loops around the blocks continuously and doesn't erase until it needs to.
r/diyelectronics • u/alliejanej • 1d ago
Project Building the programmable power supply I wish existed
Hey all, been a long-time lurker here, finally posting. I got so tired of the pile of wall warts and power strips for my music gear, I'm building a programmable power supply: 7 isolated DC channels with barrel jacks: configurable voltage, polarity, and max current settings. Also a four port USB hub, and a 100W USB-C charge port for a laptop or tablet. With all of it powered by a single USB-C power brick like you use for your laptop today.
I have a music solo act where I play live, and had some close calls with unplugged power bricks during soundchecks. I finally had it and started asking around on popular forums on how the heck other people solved this.
Most the answers I got was the same approach I already took, or a me-too-wish-this-existed response. So started designing it.
It's still in the early stages (thus the renders), but the first pass of the enclosure is designed. Have the main layout done. Now getting the first critical path board fabbed and shipped here in the next week.

Also trying something a little different with this product by designing it in the open, with weekly videos tracking how the product development is going, both the wins and the setbacks. It's kinda scary to develop like this as it's very vulnerable, but it's also awesome to share with others how our tiny team goes about building new products.
I'll aim to post here regularly with updates if there's interest. Otherwise we'll be posting updates on the blog at https://tonicaudio.com/blog and via YouTube: https://youtu.be/9xP5pFiPCFk
(Mods: if these links are against the rules, please let me know and I'll remove them. Def not trying to be spammy!)
r/diyelectronics • u/SnooWalruses9173 • 1d ago
Question LED strip lights helpt
I am looking at LED strip lights and I don't want to buy the wrong thing.
I want to run the lights around the perimeter of my home, but be able to make them all different colors like Christmas lights, but also have the ability to set something like 10' one color, then 5' another, and repeat that pattern.
Maybe a "chase" feature where one light goes from one end to the other.
I bought a few sets so far and they don't do what they advertise, so if anyone knows exactly what terms I should look for, I would appreciate it
r/diyelectronics • u/One-Mastodon-6442 • 1d ago
Project [WIP] Strata Deck a modular PC volume mixer with magnetic snap on fader modules
Hi all! I've been working on Strata Deck, a modular controller for my PC: a main unit with keys, a knob and a small screen, plus fader modules that snap onto the side, no cables between them.
These are CAD renders, not photos. Everything is designed, test prints are going, and the boards are being made at JLCPCB, but nothing is assembled yet.
Main unit (100 × 94 × 16 mm)
RP2040 (Pico clone with USB-C) on the underside of the main PCB
1.14" IPS display (240 × 135, ST7789)
EC11 rotary encoder with push button
8 Kailh Choc v1 switches in hot-swap sockets, low-profile blank keycaps
USB composite device: works as a plain HID keyboard/media keys without the app
Fader modules (25 × 94 × 16 mm each)
Bourns PTA 45 mm slide potentiometer
STM32G030 per module, UART daisy chain (+5V, GND, 2 data lines)
4-pin magnetic pogo connectors on both sides, steel dowel pins for alignment
Up to 3 modules, then an end cap that holds with 4 magnets
Modules can be flashed through the chain (ST's UART bootloader, no ST Link)
Enclosure: 3D printed. No visible screws, they sit under the rubber feet.
Status: Module PCBs ordered (JLCPCB, assembled), main board and pogo carrier board ordered. Firmware for both MCUs compiles but is not tested on hardware yet. Test prints so far: USB-C wall pocket fits, magnetic pogo test piece snaps together and has continuity, display window fits.
I plan to opensource the CAD, PCB files and code once the first unit is built and tested.
I'd love feedback on:
Would you use magnetic pogo connectors for a daisy chain like this, or is that asking for trouble?
What would you want the faders to control besides app volume?
Anything in the design that screams "this will break"?
Thanks for reading!
r/diyelectronics • u/Optimal_Dog_4153 • 1d ago
Project Help for VERY simple project: 4 individual infrared lights powered by an USB cable.
Hey all, my name is Felipe, I live in Belo Horizonte, Brazil.
I'll make the context short, if you don't care skip to next paragraph. I've always wanted to turn my Wii Remotes into light guns to play some old light gun video games. I recently found out how. It works well enough, but it's not super accurate. The infrared emitters that allow the infrared camera at the tip of the controller to triangulate the position for the pointer has only two lights and they are very close together. The easiest way to get better tracking is to have 4 lights that I can assemble on the corners of my TV. I looked for it at Aliexpress and they're wonky and very expensive, specially with shipping, so I thought I could do it myself.
I can do some simple soldering, tho I'd like it better to avoid it if I can. What I need are 4 IR light emitters, I need to have enough cable length between them to cover my TV and some (in case I decide to get a bigger TV one day, right now it's 55"). Whether they're daisychained or are all connected to one "hub" doesn't really matter to me, whatever's easier as long as the power to each light is sufficient and reasonably uniform. Mind you, each one of these don't have to be just ONE bulb, it could be several. Maybe like...... 4 or 5 of the tiny ones.
I'm sorry I can't give specifications because I don't rly know much about it at all. I know what I need, but have no clue how to get there. As in voltages, resistance, etc....
I'm sorry I can't help you (and myself more), but if anyone can tell me what to buy and do I'd much appreciate it. Thanks =D
r/diyelectronics • u/Excellent_Brick2893 • 2d ago
Question Is it possible to repurpose the LCD in a digital photo frame to use with a Raspberry Pi?
I wrote a program that displays live air traffic data just as a fun project. This is my very first project like this so I don’t know much.
I thrifted this HP digital photo frame so I could hopefully recycle the LCD but I’m not sure it’s even possible now. There is no HDMI ports, only USB and SD card inputs. I have a lot of old electronics and I started this hobby so I could hopefully learn how to reuse and recycle the parts I have.
Should I give up and just purchase an LCD or has anyone else been able to make something like this work?
r/diyelectronics • u/banjesta • 2d ago
Project Touch Screen Guru Ultra Series 27-inch 4K monitor
I’m looking to install a 27–32-inch 4K touchscreen on a wall, connected to a Windows mini PC.
Ideally, I’d like it to sit as close to flush with the wall as possible. I’m considering a shallow frame or enclosure with concealed cables. The other side of the wall is an accessible stairwell, so there’s some flexibility with cable routing and where the computer sits.
I’ve been looking at the Touch Screen Guru Ultra Series 27-inch 4K monitor, but I’m having trouble finding real-world installation experiences.
A few questions:
Has anyone used this particular monitor? How reliable is the touchscreen with Windows, especially after sleep or restarting the computer?
Does anyone know its actual ventilation requirements? Could it safely sit in a shallow, ventilated frame, or would it need substantial clearance behind it?
Has anyone purchased from Touch Screen Guru and had experience with their return policy? I’d need to unpack and connect it to my PC to verify compatibility before committing to the installation.
Are there other 27–32-inch 4K touchscreens you’d recommend for a clean, low-profile wall installation?
I’m also considering the Beetronics 27- or 32-inch touchscreens, which are 1080p and seem more explicitly designed for this kind of installation.
I’d love to hear from anyone with firsthand experience. I’m trying to find something that looks good, works reliably, and doesn’t turn into an unnecessarily complicated installation project.
r/diyelectronics • u/b25fun • 2d ago
Discussion Looking for a cheap 7 inch 800x480 RGB565 FPC/FFC IPS capacitive touch screen display.
reddit.comr/diyelectronics • u/squidoeye23 • 2d ago
Question Is there a way to adapt a flat ribbon cable from 26 pins to 30 or 40?
reddit.comr/diyelectronics • u/SandeepNagaraj • 2d ago
Question Is 6-7 inch sub 10 dollar screen with touch, is it possible in DIY world? Call me a Dreamer
So I have been running a custom hardware which works similar to vending machine, for now I have a 16x2 screen to communicate with the user.
That screen is way too small, my user is usually standing 3 meter apart, its difficult to read.
But that is not the main issue, my user wont notice if there is an error or I want to communicate something important, I can think of doing things like flashing 16x2 LED on and off to grab their attention etc, or a custom LED matrix I can flash all of that is a valid scenarios.
But I don't want to do any of that, I am asking a difficult question a sub 10$ beautiful screen that I can drive from ESP32
Here are the things i considered.
Look at this: https://www.maxbhi.com/lcd-with-touch-screen-for-samsung-galaxy-a34-5g-black-display-glass-combo-folder.html
this is a Samsung A34 screen clone, roughly 10$ this is retail price that means a wholesaler is selling it for 5$ for them (guessing)
These are mass manufactured clones and there is a possiblility to get them around 5-6$ range, now all I have to do is build a software layer for something like ESP32-P4(which is out of stock in LCSC from a long time) to translate screen signals to samsung display. If we crack this once for some mass produced phone all diy community can get this big beautiful screen for 10-12$ retail.
That would be such a good world to be in, these tiny inexpensive devices sporting great displays.
I have also looked into Samsungs driver for this display we can get init codes, so we can emulate host from our own IC.
But the question I am asking is simple: Can I get a sub 10 dollar screen with touch for ESP32/Arduino? I know its difficult/impossible, is there something that I missed ?
I have seen Chinese big display with RGB something they are quite expensive.
Am I missing something? Is there something thats there already and I am missing it glaringly?
P.S.
I am not a hardware engineer, I am a software engineer stumbled on hardware, assume I am quite dumb in electronics.