r/davinci3d • u/RDAM_Whiskers • Oct 07 '20
r/davinci3d • u/MoreTubaNeeded • Jan 15 '21
Show off I still have some tuning and a heated fix but it prints now.
r/davinci3d • u/florianuhlemann • Dec 18 '15
Guide on how to use third-party filament on da Vinci 1.0A (and similar) 3D printers while being on latest firmware
Hello guys!
I have recently acquired a da Vinci 1.0A printer and I really love the astonishing capabilities of this very low-cost 3d printer. Many complain about the lack of the ability to use any filament you want. So I've decided to create an explanatory video on how to actually achieve such goal!
https://www.youtube.com/watch?v=MLnXEyarf4I
Have you tried this? What filament are you using? Do you think it is worth it? Have you experienced any downsides? I'm very curious!
Cheers Florian
r/davinci3d • u/MoreTubaNeeded • Jan 14 '21
Show off Just replaced the main board on my 1.0 and I am doing my first test print. Next step wire management.
r/davinci3d • u/MPatten1 • Mar 13 '19
Flexible filament
I have a DaVinci 1.0 Pro which has an open filament design, I want to buy a flexible filament to use but don't know where to start. What brands and filaments have you tried and do they work? (ik bowden tube designs are hard for flavor filaments but I would like to try)
r/davinci3d • u/nickc124513 • Jun 16 '20
Show off Pretty good benchie off of a DaVinci jr 1.0 pro
r/davinci3d • u/Potter_CAD • Jan 21 '20
Da vinci 1.0 to CNC Milll
Hello, I am converting a Da Vinci 1.0 to a mill usinging a spindle I bought. has anybody ever done this? if so what firmware package did you use and how did you write it? I am unexperienced in these things so anything will help. TIA
r/davinci3d • u/iManny99 • Jan 16 '20
Print Quality Help Da Vinci 1.0 Pro help. Please diagnose. Dirty nozzle?
r/davinci3d • u/1234567890-asdfghjkl • Jan 08 '19
Software Update Regarding 3rd Party Filament
I started up the software for my da Vinci miniMaker and was prompted to update.
The changes indicated something to do with 3rd party filament.
Does anyone know if this change is for the better or worse?
In other words, does this now allow for 3rd party filament or does it make it more difficult to use it?
r/davinci3d • u/kauboy • Nov 13 '15
XYZPrinting releasing open filament source printer with aluminum bed!!!
I was shocked. It looks like they've finally taken a step toward a more open platform. Their new "1.0 Pro" will accept any filament brand(no more cartridges/chips) and will have an aluminum heat bed. The da Vinci 1.0 Pro: http://us.xyzprinting.com/us_en/Product/da-Vinci-1.0-Professional For the first 100 to pre-order(expected shipment starts this month) they are only asking $550 for the printer that will retail for $700 later. Pre-order discount 1.0Pro: http://us.store.xyzprinting.com/preorder/daVinciPro If I only had and extra $500 lying around. It will also offer laser etching later, for etching things in leather/wood/etc...
r/davinci3d • u/longbeachhockey • Jun 02 '15
Warning: Buying an arduino to use as a filament resetter can get out of hand!
r/davinci3d • u/mwilliams • Dec 22 '14
Second print. Straight out of the box, included filament and no calibration. Quite happy!
r/davinci3d • u/TVpresspass • Jan 19 '22
What modeling software do you use?
I know you can use Cura for printing now, but I actually don't mind XYZ print for my current uses. However XYZmaker 3DKit frequently crashes, and is really difficult for me to manipulate or change things I find. What software are you using to build or edit 3d models for your printers?
r/davinci3d • u/NotTheDEA12 • Dec 13 '20
Prints keep globbing
Hello, so I just got a Da Vinci Mini W+ and I am having trouble with the prints. When it begins on the first layer generally, it seems to glob up, causing the prints to become uneven, abd filament to be extruded into the wrong place, is there any way to fix this? I am also not sure how to calibrate my printer
r/davinci3d • u/Bluefroguk • Nov 30 '20
Newbie Question - First print attempt fail
Hi Guys
Brand new to 3D printing
I've just got my hands on a second-hand DaVinci 1.0a (with Repeaiter 0.92 firmware).
I've tried to print a Benchy (http://www.3dbenchy.com/) to see how it all works.
First attempt failed - the extruder kept hitting the side of the bed, but recalibrating the bed seemed to fix that.
Second attempt failed - after a few minutes i noticed a wod of stringy PLA gathering around the nossle and the print looked very messy (see the images)



Does anyone have any suggestions for what is wrong?
Does anyone have any good sources to help troubleshooting - i don't know the terminology etc. yet to know where to start looking.
Thanks
r/davinci3d • u/polo080 • Sep 18 '20
Broken Printer Help With torn belt
I was in the middle of a print when all of a sudden I got an error message saying "Y axis movemet abormalities. (Service Code 0031)". I checked in the printer to see if the y axis belt is fine, and then I saw another little one next to it torn. How and where can I find a replacement belt for this? Thank you

r/davinci3d • u/[deleted] • Aug 15 '18
Davinci Mini warning that filament is low when it’s not.
Figured I would give it a shot here for anyone that may have had this problem or a suggestion for it. My Davinci Mini stopped printing and I’m getting the “Your filament is running low and may run out during loading” prompt, however my spool is very far from low. So far I’ve recalibrated, cleaned the extruder and reinstalled the software. Still nothing. Any helps would be greatly appreciated! Thanks!
r/davinci3d • u/JHorwitz1011 • Jun 14 '18
Da Vinci 1.0 Pro Mod/Improvement Help
Just got my da Vinci 1.0 pro a few months ago, and it's great, but I would like to improve it in a few ways.
1: direct drive: how do you recommend I mod it to become direct drive? I would really like for the printer to be able to print flexible filament, which isn't posible with the bowden extruder.
2: improved hot end: I have seen many improvements of replacing the hot end with an e3d hot end, but I am not sure how to do it and I do not want to damage my printer!
3: oil system as a whole: a while back I had a large glob on the tip that to get off, I had to go to the clean nozzle setting which pushed horizontal axis' in a weird place. They still print fine, but they are a tad loud now and I would like to make them quieter.
If you have any suggestions in regards to other mods I can do, please leave them in the comments!
r/davinci3d • u/illpicklater • May 06 '18
Da Vinci Jr.1.0.pro bricked
I got black bars on my display after having issues with a few SD cards, I put it in bootloader and did a firmware upgrade. It says it completed and that I could start using my printer, but it still says bootloader on the screen and it doesn't respond. I've done this like 8 times and it does nothing, has anyone else experienced/solved this problem?
EDIT: SOLVED! I had to reset the firmware with the J37 pins(I had to remove the connector) underneath the bottom panel. Then the printer started working like normal, If you have this problem MAKE SURE you take the SD card out! Otherwise it will not work!!
r/davinci3d • u/twitch2641 • Mar 31 '18
For anyone who still owns the original 1.0, you might need to replace the idle wheel
r/davinci3d • u/Wacko-Polako • Feb 09 '17
I have made a few helpful videos on the Da Vinci 1.0a. I won't be spamming links but I hope my videos can help.
r/davinci3d • u/funky_duck • Dec 13 '16
Missing Y-Axis bearing or am I crazy
A while ago my Y-Axis belt broke. XYZ sent me a replacement and I finally got around to tearing my printer apart to replace it. After replacing the belt I began to reassemble the printer, starting by putting the Y-axis shaft back into place only to discover...
One of the bearings in the Y-Axis mounts has seemingly gone missing. The picture is of the two plastic mounts where the Y-Axis connects to the printer frame.
I am assuming there is supposed to be a bearing in each side?
When I popped off the Y-Axis originally the white plastic pieces were attached to each end. While fiddling with it all, trying to get that stupid belt looped over, both of the white mounts popped off.
I did not hear something metal hit the floor and roll away and I've tipped my printer on its side to listen for something rolling around but so far no luck - so I wanted to make sure I am supposed to have a bearing on each side of the Y-Axis shaft.
r/davinci3d • u/fencing49 • Mar 07 '16
Awesome E3d mod for davinci makes it hot-swappable. check it out.
r/davinci3d • u/johnboyjr29 • Feb 27 '16
if you have a jr and an android phone that can write to ncf cards a guy on soliforum has a way reset you chips
http://www.soliforum.com/topic/11108/davinci-junior-cartridge-reset/page/25/ look for greatone76 he said he will be doing some for free
he just did it for me heres what i did
downloaded https://play.google.com/store/apps/deta … amp;hl=en0 onto my phone
turn nfc on my samsunge note 2
in RFID NFC Tool picked Mifare Ultrlight/ Ntag
Hold up the card up to the phone it beeped
pressed read
you will get Action failed ntag213 page: data and a bunch of data
take a screen shot and sent it to greatone76
He sent me my password
restart RFID NFC Tool and slect the little key in the upper right corner
Click the key with a +
Pick NTAG 21X Series
name it any thing and enter the key he gave you hit ok make sure its active
go back to Mifare Ultrlight/ Ntag
make sure autenicat with (key name) is checked
hold up chip and hit read
write E0930400 to page 0A , then write E0930400 to 0B, then write E0930400 to page 14
done you now have 300M
seems like a lot of steps but it takes less then 10 min