r/davinci3d • • Jan 23 '20

Cancel print remotely?

0 Upvotes

I've been searching around for a way to cancel a print remotely, but can't seem to find one. Has anyone come across a method to do this?


r/davinci3d • • Apr 13 '16

Attempting to have Dave print me a new x axis belt tensioner........with its broken belt tensioner. Wish me luck! (Don't mind the lube)

Thumbnail
imgur.com
1 Upvotes

r/davinci3d • • Dec 22 '15

Print sticking to bed

1 Upvotes

Just finished a piece with a large surface area and had a helluva time getting the thing off the bed. So much so that I now have to level the bed again. What am I doing wrong? I let it cool long enough that the bed dropped then, when it was so difficult, I waited another 30 min. Lots of cracking sounds as things cooled so I was nervous about cracking the glass.

DaVinci 1.0a printing ABS - all stock so far.


r/davinci3d • • Feb 12 '21

What is the unit that the XYZware /XYZprint uses for the filament usage?

1 Upvotes

I ask this b/c I decide to buy some third party filament but I have no clue what the hell the "m" is.

Is it grams?

For example after you hit print on the older software or prepare on the newest software it will say these two things

Filament estimated usage
xx.xx m

Filament current usage

yy.yy m

I would like to know this so I can easily keep track of how much filament I will be using with the 3rd party filament and to make sure that I have enough filament for a print when I start nearing the end of a spool.


r/davinci3d • • Apr 26 '20

Davinci Pro Error 0040. Help please!

1 Upvotes

I'm looking for any information available on solving error 0040 on the Davinci Pro 1.0.

I'm aware the issue is due to a faulty micro SD and an SD card replacement is the fix, however the issue i'm having is different...

The printer will occasionally decide to pull the error around 80% of the way through a print, which after a reset would return to its working self. I've tried new SD cards to no avail.

Any help would be much appreciated.


r/davinci3d • • Jul 19 '15

Has anyone successfully downgraded from 1.2.7 on an older 1.0?

1 Upvotes

I just picked one of these guys up from someone on craigslist, and I'm trying to load the repetier firmware so I can use non-proprietary filament. I'm following the steps in this post https://www.reddit.com/r/davinci3d/wiki/slicing but I can't get the LEDs to turn off and on with arduino and they say not to proceed if you can't do that. Anyone have any advice?


r/davinci3d • • Aug 07 '18

I wonder if the colors make a difference.

1 Upvotes

I've noticed that my new spool of black filament really gums up the nozzle. I've gotten in the habit of loading a different color and unloading it just to clear the nozzle before I shut down.


r/davinci3d • • Sep 08 '19

Print Quality Help Weird Problem! My prints all start ok but end up loose half way through. Do I need a new extruder?

Post image
2 Upvotes

r/davinci3d • • Jan 25 '21

Is Da Vinci mini and Windows 10 incompatible?

2 Upvotes

After a long hiatus from 3d printing, I'm getting everything back to working order to discover my Da Vinci mini is not recognized by current computer running Windows10, and the old laptop I printed from runs Windows 7, which is no longer supported, and runs very slow.

If anyone else has a mini, what OS are you running it on?


r/davinci3d • • Mar 22 '16

Circles not round? Heres how I fixed it.

2 Upvotes

So I was running into an issue with my circles coming out oval and I had nailed it down to my Y axis. Luckily I found a forum post about the exact issue. Its been driving me nuts for a couple of days now as I am trying to print some parts for a mostly printed CNC and I figured you guys might benefit from it as well. The forum post in question is http://www.soliforum.com/topic/9517/davinci-circles-not-round/ but long story short the fix is below:

  • Power off the machine.

  • Remove the side panels and loosen the belt tension on the axis you are seeing the problem.

  • Pull the gantry to the front of the machine.

  • Slack the belt enough to re-seat the belt on the gear with equal slack on both sides of the pulley.

  • Apply gentle tension (dont break it hercules but keep it firmly tightened) and retighten the screws.

  • Repeat for the other side (if needed).

While I was at it I lightly greased my rods with some lithium grease and now everything is operating much better. Hope this helps.

Edit: Formating and such.


r/davinci3d • • Jun 24 '19

SD card mod, black bars after,

2 Upvotes

So let me preface this by saying I know my way around a 3d printer. 2500+ hours on my replicator 2, etc etc.

So I'm doing the mod where you can directly upload files to the mirco SD card in the back of the printer (davinci pro 3in1) and once I popped the SD card back in, all I get is the power supply fans and black bars. Did I soft brick it, or do I need a new mobo?


r/davinci3d • • Sep 01 '21

Just got my first printer. Its a da vinci 1.0

2 Upvotes

Bought a da vinci 1.0 today.. They claimed it was bricked while flashing. I followed a tutorial and re flashed it and and put on .91 . what are the differences between .91 and .92? i cant seem to find much on this printer... Also what programs can i use for slicing now that it is a different firmware. Id like to use the most popular one as eventually i want a bigger bed and to hopefully use the same software. Ive been hearing lots about cura.


r/davinci3d • • Feb 21 '21

Davinci 1.0 in 2021

2 Upvotes

I have the opportunity to buy this from a friend for $70, I've read online that you can bypass filament restrictions by tweaking it (looking at this article in particular:

http://www.soliforum.com/topic/15273/howto-convert-da-vinci-jr-to-ramps-14/ )

This would be my first 3d printer and it seems like a good deal. Just wanted to gauge and see what this community thinks. Is there anything I should know about this model or are there better printers out there for a similar price point (even if a bit more). Appreciate all your help!

*** Update

Edit: I bought it and as it turns out it already has repetier flashed. The only issue now is that no filament is extruding. I tried printing something and it makes the movements as if it were printing but nothing comes out. I suspect a gunked up nozzle. From what I hear acetone and a steel brush may solve this?

https://imgur.com/a/ICNlWms

Do I need to heat up the extruder and push a paperclip through it to rinse out melted plastic? Appreciate all the help


r/davinci3d • • Dec 08 '20

How do you use 3rd party filament on the Davinci pro jr 1.0 any video links?

2 Upvotes

I keep hearing abt how much better they can be and also i bought 3rd party filament but it doesnt fit in the printer and if it did it still wouldnt work bc its closed source


r/davinci3d • • Feb 13 '20

I need the stepper driver pinouts

2 Upvotes

I want to use my Davinci 1.0 MOBO to test out some dual nema23 stepper configurations. I am going to use an external driver but I need the pinouts for the plug in drivers so I can get to the control signals. Does anyone have this handy?


r/davinci3d • • Jul 27 '20

Xyz allows for slicing with cura now I have some questions.

3 Upvotes

I’m a 3D n00b and I’ve been happy with my prints because they have never failed, but I would love to get a little more quality out of my prints as far as layer lines, etc. stringing has never been an issue I just want cleaner smaller layer lines. Is it worth using cura to get all the extra settings? Or does xyzware have the settings I need to do this?


r/davinci3d • • Dec 26 '14

Newbie, Just printed this print, "good" setting, canceled the second one after seeing similar banding on the inside. Any suggestions?

Thumbnail
imgur.com
3 Upvotes

r/davinci3d • • Jun 09 '23

R/Davinci3D printing will be joining the June 12th Blackout in protest of Reddit's API changes. Please support open-source projects and democratization of Projects by using other platforms until we return. This sub will not be accessible for at least 2 days, and possibly longer.

Post image
5 Upvotes

r/davinci3d • • Jan 10 '22

Motherboard/ firmware replacement options?

3 Upvotes

I have a da vinci jr 1.0w and i want to be able to run my own filament. what options do i have? do i need to replace mobo, flash firmware, or can i bypass the nfc reader entirely?


r/davinci3d • • Jun 01 '23

alternate scanning software

1 Upvotes

Has anyone found a replacement for the XYZ Scan that comes with the Davinci printer?

My scan results are bad. Want to tweak the performance.


r/davinci3d • • Jun 30 '23

Thank you everyone, /r/Davinci3D will be in Restricted / Read-Only going forward

3 Upvotes

For the sake of not breaking search engine links and for people with niche issues I've changed this sub from Private to Restricted.

Due to Reddits API changes and me being a RIF mobile user I won't be spending as much time here anymore. Since the only other moderator /u/jimmydata has been MIA for 6 years this sub will go un-moderated going forward. In an effort to prevent this sub from turning into an un-moderated spam cesspool I'm forced to set this sub to Restricted until further notice (aka when Reddit removes me & Jimmydata and sets new mods).

I'd recommend anyone having printer issues / questions to check out the larger /r/3dPrinting sub.

It's been fun and best of luck!


r/davinci3d • • Mar 21 '17

I need some measurements from a DaVinci Jr. 1.0.

3 Upvotes

Hey guys!

I need someone who can take some quick measurements on their Junior for me.

The x-axis runs along a rod, and that rod sits just above a little "shelf". Mine is off-level. I need someone who can measure what their gap is between the rod and the shelf. I'm estimating somewhere around 8 mm, but my calipers are broken. I just need a measurement on the left side, right side, and middle. I'm going to make a brace, because apparently the right side drooping is a fairly common issue.

Thanks a ton!


r/davinci3d • • Mar 27 '16

Pro stopped printing and locked up.

2 Upvotes

3:45 into a 7hr print, the printer just stopped. No error, no response from LCD or buttons, just stopped. The fan was still going, but nothing else would happen. I left it for 30 minutes and no change. Eventually just turned it off.

Has anyone else had this happen? Is something overheating maybe?


r/davinci3d • • Dec 09 '14

Mods to your printer?

6 Upvotes

Hey guys.

Has anyone modded their printer? If so what have they done?

Here my list of mods so far: