Hi all, I repair consoles for a living, and while diagnosing a Steam Deck board I found that the EC prints a pretty detailed boot log over UART. Reading it raw is painful, so I wrote a small Windows tool that decodes it live.
**What it does**
- Reads the EC log from any USB-UART adapter (or opens a saved .txt)
- Decodes the power sequence: G3 → S5 → S3 → S0, RSMRST, PLTRST
- Decodes BIOS POST codes (Insyde H2O + AMD AGESA ranges)
- Tracks 20 boot stages with timing and deviation from a known-good board
- Colour-coded: green = OK, yellow = something not connected (battery, display, SSD, controller board), red = error or hang
- If the board hangs, it shows the step it stopped at and what the EC is probably waiting for
- Built-in UART pinout window with board photos
- UI in English, Ukrainian, Russian
**Hookup**
UART RX on the board → adapter RX, GND → GND, leave adapter TX unconnected. 3.3 V adapter, 115200 8N1. Start capturing first, then plug in the battery or charger.
**Some things I learned from the logs**
- The power sequencer timing is identical to the millisecond across every configuration I tried. Missing parts only change what happens after it.
- After S0 there's roughly 18 seconds of PSP/memory training before the first BIOS codes. A board that looks dead for those 18 s may be fine.
- No SSD → BIOS ends on "no boot device"; no display → panel ID reads as not connected; no controller board → the USB stage never shows up. So you can tell what's missing without opening anything else.
**Download / source**
https://github.com/Olarkal/Steam-Deck-UART-Analizer
Free, open source (GPL-3.0). The repo also has sample logs from 6 configurations, power sequence tables and timing diagrams.
**Limitations**
Tuned for the OLED (EC ITE IT81302). The LCD model uses a different EC, so its log may differ. AMD POST code meanings come from public AGESA tables, and a few may not match Van Gogh exactly.
If you have a UART log from an LCD board or a faulty board, I'd really appreciate it. That's how the decoding gets better.