r/blackpowder • • 3h ago

What is this thing?

Post image
29 Upvotes

Just bought this at a gun show for $25 and want to know more about it. I did some googling and figured it might be a DIY kit gun but it doesn’t have any markings. So if anyone could tell me more about this thing that would be great! Thanks,


r/blackpowder • • 11h ago

I want to know more about this rifle

Post image
43 Upvotes

according to my grandpa his grandad picked this up in Afghanistan in the 20s anyone know anything else about this neat gun


r/blackpowder • • 5h ago

Update on the Spiller and Burr. She works! The nipples are either beat to crap or oversized slightly, really had to give it the umph for #10 caps on all but 2, but hey. Easy fix.

13 Upvotes

r/blackpowder • • 1h ago

Looking to get into muzzleloading, I can't find any black powder online. Is it okay to use pyrodex instead?

3 Upvotes

I recently bough a percussion cap Thompson Center hawken rifle and I'm trying to get most of the stuff I will need to shoot it. I have been able to find everything I need except black powder, everywhere I look it's out of stock. I have found plenty of pyrodex online, and I'm wondering if I should use that instead. I've heard good things and bad things about it, should I try to find some black powder since I'm a beginner to muzzleloading or should I go with pyrodex? Is there a specific brand I should look for?


r/blackpowder • • 9h ago

Pietta Blued Great Western Trigger Guard, Backstrap and Spring?

2 Upvotes

For a long-term project, I'm looking for blued steel tigger guard & backstrap, along with a mainspring. Does anyone know where I can find these for cheap? Everything I see is just for individual components, no springs, etc. and it costs almost as much as a new revolver. Pretty crazy, so I'm hoping someone here knows where I can get what I'm after.


r/blackpowder • • 1d ago

Blackpowder shooting.

10 Upvotes

Hello everyone!

I was thinking about starting in BP shooting, maybe even connecting it with my other hobby (reenactment).

Im not decided though with which gun its better to start. Should I Go with a revolver or a rifle? From the revolvers I was thinking about colt 1851.

From long arms, I was thinking about hawken rifle, mostly because of the price, its around 600$. But from what I have read, hawken's were made as a custom, so it could be a big red flag for reenactment (in this case Explorers from aroud 1880s or 1890s even, or Just 19th century after the CW). Other choice is a musketoon 1861 Pattern enfield. Its much more expensive, I think around 1500$. But I do think it was more Common after and during the Civil war. But also, from the money I would Save from buying the Enfield, I could buy equipment for the hawken, caps or the black powder holster (i dont know word for it, sorry) etc. But If I would be buying it mostly for reenactment, then it would most likely sit On my back and maybe pop Just a cap rarely or a blank BP shot.

Thank you in advance, have a nice Day.


r/blackpowder • • 1d ago

I need help find a replacement part.

Thumbnail
gallery
1 Upvotes

So Im making one of does flintlock kits and when I was looking at the parts I saw that the trigger was missing the part that held the trigger in place. And I looked all over going to site to site trying to find a replacement but I give up and Ive gone to reddit as you now see.

The kit is called
Traditions™ Flintlock Blunderbuss Kit - .54 Cal - KR510


r/blackpowder • • 2d ago

Gotta love the Rem 1858

Post image
83 Upvotes

r/blackpowder • • 1d ago

First kit

5 Upvotes

Ive used flintlocks for a while and was going to try making my own since I’ve had an interest in it for a few months.I was thinking about buying a kibler kit since they seem like a good starting place. I was wondering if once I complete it, can I resell it? I was planing on doing more and more rifles until i can do more advanced work but I dont have the money to buy a ton of kits. At minimum id like to not lose more than 200 bucks a kit


r/blackpowder • • 2d ago

Market Interest in percussion breech loaders

4 Upvotes

Hello everyone, I'm interested in doing some market research. I know there are a few breech-loading percussion guns, but those are usually religated to Sharps and Smith rifles, with some others made infrequently by The Rifle Shoppe. I was wondering if anyone would be interested in other breechloaders like the Westley Richard or Monte Storm (others would be possible, but those two I have access to and could be made into other calibers easily enough). I just got my machine shop fully finished, and I want to graduate from muzzleloaders to something more complex.


r/blackpowder • • 2d ago

I'm sort of new(year in, but only 5 batches made)

Thumbnail
gallery
10 Upvotes

I get slow burns at times but I found this is not a "hurry up" hobby so my best batch was super fast(burnt part of my eyebrow, lol).

That batch I took my time, grinding all ingredients individually, sifted individually, mixed in tumbler for 3 hours, made a ball(added 90% isp. Alcohol) dried it out, sifted one more time.


r/blackpowder • • 2d ago

Working up a load update

Post image
11 Upvotes

Good morning all,

I did some shooting last night with my Hawken .50 cal 1:48 twist.

I started at 20 yards with a steady rest and 60gr worked up to 70 gr (best grouping) 75gr started to open up and I was using spit patch.

I dropped down to 70gr and shot with Stumpy's Moose Snot lube. Grouping opened up a little bit. But at 20 yards I had about 1" grouping. I'm going to try fine tuning it a bit more with the powder charge and trying a felt wad under the ball I heard that helps sometimes.

Here are some patches I found from last night. It's kind hard to see but one or two patches have little holes in them. I'm not sure if that's a problem or not.


r/blackpowder • • 3d ago

"Remember, switching to your pistol is always faster than reloading." -Gaz

Post image
88 Upvotes

Had such a good time hunting with my CVA Hawken .50 cal this year, I just had to get a pistol to match! I'll be able to carry both during next year's early muzzleloader season since it's legal to hunt deer with .50 cal muzzleloading pistols in PA. Never know if one will sneak up on you at close range where I hunt!

This Traditions Kentucky Pistol fits the bill, can't wait to put it through its paces. Since they match calibers I'll be able to feed them both from the same kit.

A longer term project will be to devise, create, and test a stock attachment that'll turn it into a short, handy carbine! Wish me luck lol


r/blackpowder • • 3d ago

As promised, I return with more photos of the inherited rifle.

Thumbnail
gallery
53 Upvotes

I would like to note, there are absolutely no accessories. The only thing I have is the gun, the case he kept it in, and an old shirt of his he wrapped the gun in.

Mom states he built it, fired it once or twice, then it sat in the basement for 30 years. Now it sits in my basement. Might hang it.


r/blackpowder • • 3d ago

Need help identifying this model

Post image
30 Upvotes

I know the brand is ASM and a 44 cal revolver but I’d like to know what model it is. Thanks in advance


r/blackpowder • • 3d ago

CVA model ID

Thumbnail
gallery
15 Upvotes

Back again with another model ID needed. Thanks again


r/blackpowder • • 3d ago

Rust removal product recommendations

Post image
28 Upvotes

My Bess has some rust growing. What's the what oil/ product to remove and protect?


r/blackpowder • • 3d ago

Inherited a Hawkin Kit Rifle

Post image
42 Upvotes

Only photo I have right now, but I do have some details.

2 triggers, double set I think.

Built sometime in the 80s or mid 90s

I’ll get more photos when I’m home but I was wondering if anyone would be able to immediately identify it off this photo. I’ve thought about shooting it but Blackpowder isn’t my world.


r/blackpowder • • 3d ago

Is it possible to reload .22 LR cartridges with black powder and a lead ball?

9 Upvotes

I was wondering whether it would be possible to empty a .22 LR cartridge, replace the original powder with black powder, and replace the bullet with a small lead ball or another projectile of the same caliber.

Has anyone ever experimented with this, or is it simply not feasible or safe?


r/blackpowder • • 4d ago

Putting the freshly repaired 1854 Type 2 Lorenz Infantry Rifle through its paces, with faithfully recreated Austrian military cartridges.

157 Upvotes

r/blackpowder • • 4d ago

Where are you all finding 2F powder at these days?

9 Upvotes

Title!


r/blackpowder • • 4d ago

Working up a load

3 Upvotes

Good afternoon 1st time posting on here.

I've been having trouble working up a load for my black powder guns for patched round balls.

Both guns are 1:48 twist and one is a .50cal and the other .54 cal.

I've worked up loads in inlines before with amazing results but the PRB are giving me a hard time.

What's your process for working up a load for patch round balls?

Best I have is like 3"-4" pattern with a steady rest at 50 yards. I would like to tighten that up to about 1"-2" pattern.

Thank you,

Justin


r/blackpowder • • 4d ago

My custom 3D-printed paper cartridge box for my new possibilities bag

Thumbnail
gallery
15 Upvotes

Here is my design for a custom paper cartridge box and the cartridges I'm making for my .69 caliber smoothbore slugs (I'm also currently designing a slug for a 19-gauge shotgun). Each box holds 33 rounds and is designed to stack directly on top of a second identical box, giving me a total capacity of 66 cartridges. The box pictured is a PLA prototype, and the final versions will be printed in ESD-safe PETG to prevent static buildup.

​The cartridges are constructed similarly to a British Enfield paper cartridge, where the powder sits in an isolated upper compartment and the projectile is secured at the base. After rolling the paper tube, the waist is cinched tightly with red fishing line to keep the powder charge sealed and prevent it from leaking down around the slug. I use 24-gauge copper wire to retain the fluted slug tightly in the base, then pour in the powder and fold the top tail down in the traditional Civil War style.

​Because the slug protrudes slightly from the bottom, you can tear the tail, pour the powder, squeeze the slug directly out of the paper base into the bore, and discard the empty wrapper—just like an Enfield cartridge.


r/blackpowder • • 5d ago

How much ammo is this?

17 Upvotes

Im reading a book about early arizona explorations and in this book it list a general list of equipment.

"Each man's equipment generally included a rifle with an extra lock,one hundred Flints, 25 pounds of powder, one hundred pounds of lead".

Can anyone give me a rough estimates on how many shots these guys could fire before going back for more supplies?


r/blackpowder • • 5d ago

Anyone make a Left Hand brown bess?

5 Upvotes

I would love to get my hands on one, but I really am not seeing much in the way of them being for sale.