r/ThreePedals • • Feb 02 '17

Three Pedals are for noobs. Anyone here know how to shift without the clutch?

1 Upvotes

I grew up in a very "mechanical" setting. Dad owns a trucking company plus my current job we drive old 70s macks to snowplow airports. If there's one thing you want to avoid in bigrigs is using the clutch. Not only are they expensive and a pain to fix, they are a pain to use. Most are stiff as hell and some truck use trans stops so really you're only dealing with maybe 1/4 of full pedal travel as clutch.

I now naturally don't use the clutch unless I'm pulling from a standstill or need to do some quick shifting. Plus having to deal with stop and go traffic in a manual is a nightmare.

I DD a 03 Accord with a 4 pot. It shifts nice except for 5th and occasionally 4th since the ratios are so tight quick clutchless shifting is hard to master. On my other car an e39 525 shifting is easier since there's more room in the shift pattern, but second gear will occasionally grind only when cold.

So anyone got any experience, tips, questions?


r/ThreePedals • • Dec 08 '22

Only you guys would really understand

Post image
8 Upvotes

r/ThreePedals • • Jun 15 '17

Honda Civic B16A Hatchback

Thumbnail
youtu.be
0 Upvotes

r/ThreePedals • • May 29 '15

Weekly General Questions Thread

5 Upvotes

I have been busy the past couple months with school and a major injury, however from now on this thread will become a weekly thing, perhaps cross-posting it to other subs for more visibility.

I am also adding /u/M1kerophone as another moderator to help watch the sub.

In the coming days I will be posting in search of a mod to help with programming, so if you are active and have experience writing code feel free to send me a PM.


r/ThreePedals • • Jun 28 '19

Summer is here, and you know what that means ...

5 Upvotes

The shift knob is burning hot, so you gotta play hot potato with the shift knob. God, does it make shifting annoying!


r/ThreePedals • • Sep 14 '19

Wc T-5 Tranny problems

1 Upvotes

So me and my father just rebuilt my t-5 world class for my 94 cobra, and I’m getting problems with second gear when I downshift from third to second (keep in mind I am rev matching) I get grinding. This is with completely new synchros and bearings. But if I pull slowly into second it will let me get in gear, but I also get a winding noise while pulling slowly into gear. Any help would be appreciated.


r/ThreePedals • • May 08 '20

How many gear teeth (driving & driven) do manual transmission such as Lamborghini have?

1 Upvotes

I'm watching about Car gear ratio... and in the example, the 'driving gear' has 10 teeth, and the 'driven gears' have 30 teeth (1st gear), 20 t(2nd gear), 15 t (3rd gear), and so on...

Do real life manual transmission cars have these number of gear teeth?

I'm still new about manual transmission stuff.


r/ThreePedals • • May 02 '19

Too fast for first, too slow for second?

2 Upvotes

I am a new manual driver, i own a 2012 Mazda2. I keep getting into these awkward situations where i slow down for a red light, and then it turns green and i have to move off again before i can come to a stop. Problem is, i am usually going too fast to go down to first gear, and if i try to put it in second it's too slow and i lug the engine? What the hell am i supposed to do? It happens at every. single. freaking. light! Do i need to slow down more and piss off the people behind me so i can go down to first? Or do i need to slip the clutch and damage it by starting off in second from a slow speed? Is this damaging? I have done it a few times, i wish there was a 1/2 gear or something lol


r/ThreePedals • • Feb 10 '16

Muncie 4 speed m21 speedo gear help!

2 Upvotes

Hi guys not sure if this is the right place or not, but I have a Muncie 4 speed m21 close ratio transmission and I have the plastic speedo gear that slips over the transmission shaft but it moves freely and I think I'm missing a clip to hold it in place, I called a store and they said it is called a speedo clip but he wasn't too sure, I have the speedo cable and everything but I just need help on this.

Thanks


r/ThreePedals • • Mar 03 '20

Driving 2013 camaro ls first manual

2 Upvotes

Having trouble accelerating fast and smoothly downshifting and shifting up gear smoothly! Any tips ?


r/ThreePedals • • Mar 12 '18

Driving instructor giving suspect advice

2 Upvotes

I have about 300 miles under my belt self taught and decided to get two hours of instruction from a local instructor specializing in teaching manual. They were well reviewed on Yelp. I got some good advice like keeping your heel on the floor to get better control.

I also got some stuff that is suspect or straight up verboten according to the manual. Such as:

  • On hills to get a faster start (assuming you don't intend to be there a long time) hold the clutch half in so the engine is holding you on the hill. Obviously this is burning up the clutch, but the instructor says well how often and how long are you going to do it?

  • At lights in order to get a faster start always keep it in first with the clutch held in (ok throw out bearings are more durable now). Only put it in neutral if you think it is going to be a while.

  • To get a faster start at a light hold the clutch out until just before the bite point so you don't have to move as far to get it to engage.

Some of this advice came up because the thing I struggle with the most is accelerating fast and I was asking for pointers on how to improve. There are left turns that I have just been skipping because there was no way for me to accelerate fast enough to safely make an opening.

How should I interpret these bits of advice?


r/ThreePedals • • Jul 26 '18

New to this third pedal bullshit

3 Upvotes

Hey fellas

I bought a Ford Ranger w/ a manual transmission a few weeks ago. I've only got to spend about 60-90 minutes in it so far.

Long story short, I'm in college about 4 hours from home. I bought it while visiting my hometown, but had to go back to school literally later that day, so I couldn't tag/title/learn to drive manual that day.

I've finally got regular access to the truck, so I need to learn this goofy shit.

I'm having some trouble on the "respect the clutch and release it slowly" part. I try to release slowly but I end up dumping the last quarter of it and buck the shit out of the launch.

My main question is this: once you hit the friction/bite point and start moving, can you gently accelerate while finishing letting off the clutch? I don't have a tachometer, which sort of sucks for a first time manual driver, but I'd guess take it from like 1500 to 2000 rpm's while I finish letting the clutch out. I'd just like to know if this will fuck up the clutch bad or if it's okay to gently accelerate (only a little bit) while the clutch is still partially engaged. Or does it need to be maintain gas -> bite point -> maintain gas -> fully let off clutch -> accelerate more?

I fully get the whole bite point thing, and I get the light gas part, but the last little bit of the clutch keeps fucking me up. If I do it super slowly, I usually get it fairly smooth, but it's ridiculously slow to do in actual traffic.

tldr: give gentle gas while clutch is still being let out? or must be super low until its out?

idk man this shits just frustrating as fuck. any tips on smooth launches are appreciated


r/ThreePedals • • Jun 18 '16

bad clutch?

3 Upvotes

I dont know if my clutch is going bad but when i press it in i have to push farther than normal for it to engage and then ny truck speeds up slower than normal and i can smell this weird smell when i take off and a few moments after


r/ThreePedals • • Jun 06 '15

Weekly General Questions Thread

3 Upvotes

Ask away!


r/ThreePedals • • May 04 '19

Help reversing

3 Upvotes

Hey guys I’m really good at driving manual and I’ve had my licence (provisional or P’s in Australia) for a few months. However I suck at reversing into car park bays, I drive a Ute which is like a 2x4 truck because ima construction worker and I’m having trouble with reverse bay parks.

Was wondering if anyone could give me tips because I have to park far away from their cars in parking bays at the moment because I’m scared of hitting another car. Also, I have to reverse park in bays because I have a small pull out tray on the back with tools in it so don’t say go in forward. Thanks guys 👍


r/ThreePedals • • Feb 07 '17

5 easy ways to shift quicker

Thumbnail
youtu.be
12 Upvotes

r/ThreePedals • • Apr 01 '19

While in neutral, why isn't the car rolling even though flywheel and clutch disk are engaged (since I fully release the clutch), and there is a rotation of 800 RPM?

5 Upvotes

Handbrake is off all this time.

I read/heard that while in complete stop or idle, when car is in neutral, there is RPM around 800 RPM.

  1. Does that mean the flywheel (which is connected to the engine) rotates at 800 revolution per minute while in neutral?

  2. If so, how come it is safe to fully release the clutch while in neutral?

  3. if I fully release the clutch (while in neutral), then the clutch disk (which is connected to the wheels) and the flywheel (which is connected to the engine) will engage together, right?

  4. Why isn't the car moving even though flywheel and clutch disk are engaged (since I fully release the clutch), and there is a rotation of 800 RPM?


r/ThreePedals • • Mar 04 '15

Passed by automatics all day

5 Upvotes

I traded in my automatic 2006 Mazda 3 and got myself a stick shift Civic Si. Fun car, but I'm getting beaten from stoplights by automatics all day long - SUVs, vans, even some guy on a bicycle once. It's embarrassing.

My last stick shift experience was a decade ago, and I have about a year's worth of experience in total. I can drive the car just fine, but I prioritize smoothness. My Si is a close-ratio 6 speed, and I find that first gear is absolutely worthless. I feel that I can't give it much throttle since it's so short, and even then I could rev to 4k and still be at 17 mph. By the time I shift to second (smoothly and slowly) I've been passed by a minivan. I usually just try to shift to second at 2.5k so that I have some room to accelerate. Once I'm in second I'm fine.

How am I supposed to keep up with traffic? This car is supposed to be faster than the one I came out of. Do I rev out first? Do I get it into second asap?


r/ThreePedals • • Jun 01 '19

I'm back!

8 Upvotes

Just bought a 2007 cobalt 2 door 5spd. I've been in autos for about 5yrs. Feels good to be back!


r/ThreePedals • • Mar 18 '20

Manual in a drive thru?

12 Upvotes

Is there a right way to do this? I feel like I’m just riding the clutch and I don’t want to break anything.


r/ThreePedals • • Apr 27 '25

replacing clutch

2 Upvotes

hi! i’m 19 and started driving a 2017 320i 6 speed about about 2 years ago and my dad (previous mechanic and works on our cars) thinks we should replace the clutch soon (just hit 100k miles - 70k from previous owner). previous owner took good care of it but i learned in the car and probably beat it up pretty bad. the clutch tends to kinda “shudder” when in first or reverse, also slips sometimes when switching from 2nd to 3rd. clutch also isn’t as resistant when pushing the pedal. should we replace the clutch or stick it out for a little longer? thanks :)


r/ThreePedals • • May 06 '20

New car is jerky/bumpy in lower gears

15 Upvotes

Hello all. Just got a new Civic Si. I am also new to manual transmissions. I've noticed that when cruising around a parking lot/garage at lower speeds (< 10 mph), the car is very jerky (in both 1stand 2nd gear). Almost like it's sputtering, but the RPMS are in the 1000-2000 range. This also happens when driving in my neighborhood in 2nd gear < 20 mph.

It worries me because this is a brand new car (300ish miles). I've tried looking it up, and there aren’t many results (that I could find) regarding new cars having this issues. Do I need to patient and let the car "break in?" I haven't been aggressive accelerating. I rarely go above 3500 rpm (I shift around 3000ish). I'm attempting to rev match while down shifting. It goes well for gears 4-6, but the lower gears are harder.

Thanks!


r/ThreePedals • • Oct 26 '20

General Questions Thread

9 Upvotes

Hey all,

It's time to refresh our General Questions thread. Post away

And remember, don't litter


r/ThreePedals • • Oct 29 '20

Not able to drive my new (to me) 2012 Audi A4 that smoothly. Any tips?

9 Upvotes

I’m coming from an 09’ Mazda 3 5 speed, and have had my Audi A4 6 speed for a few months and I’m having a hard time driving it as smoothly as I could the Mazda.

I can start moving the car just fine, but 1st to 2nd is a mess, especially if I’m trying to accelerate quickly. The rest seem better but still not super smooth. It’s to the point where the car isn’t that fun to drive which is a bummer because I loved driving manual in my Mazda and made sure to get another manual after I sold that car.

What am I doing wrong? I had the car extensively tested before I bought it by an Audi specialist dealership and they said the transmission was in great shape, leading me to believe its user error. Thanks in advance for any tips.