Can anyone help me diagnose this sound? Fresh gas was added today. Ran it dry last spring before putting it away. I also added a little bit of sea foam. Any and all help is appreciated.
Machine like the- Snow Joe 323E 13-Inch 10-Amp Electric Snow Shovel
Basically I live in an apartment and I shovel the older land lords driveway, it’s pretty long. Her son has a snow blower that always breaks down and janky throttle and pint size quad he stuck a plow on.
I usually end up doing the driveway by hand bc I don’t wanna get involved with their broken equipment, it more work then it’s worth. They are very nice people also a pain in the neck to get involved with.
The snow is mostly 6” stuff with a 2’+ snow fall once or twice.
I wanna keep it in a closet, and not get involved with storing it in their garage hah If it won’t work I’ll buy a better shovel
Tldr: My Question is if I get a small cheap corded snow thrower shovel, will it work on 2-3’ deep snow if I go top down slowly moving forward?
Last year I inherited my parents old Craftsman Snowblower. As far I know, they never really did any maintenance on it, just filled it with gas and topped off the oil if needed.
It is a Craftsman 22-inch 2-stage Snowblower with Electric start they bought new in 1993. Last winter I didn’t have time due to work and family stuff to fully check it out before its first use. I added gas, topped off the oil and it fired right up. It worked very well during the first snow. During the second snow, I noticed it was constantly clogging and wasn’t throwing the snow.
Once I got time to really inspect it, I found the following:
- One of the sheer bolts had completely broke and the other sheer bolt had been replaced with a regular nut and bolt (probably one of my dad’s quick fixes) that was bending.
- The tires are completely dry rotted, originals from 93, and the tubes that were added at some point are also leaking. They hold air for a couple hours before going complexly flat again.
- The skids are non-existent, they are rotted away. Luckily our driveway was falling apart anyway so it wouldn’t do any real harm to it. Where they bolt to the sides doesn’t look super healthy and the bolts look to be rusted solid.
- The belts and spark plug are original
- The scraper bar on the front is long gone rotted away.
- The Engine runs good. Some smoke puffs when starting up and it seems like it is starting it burn oil, but not a lot.
I have been very back and forth whether to throw in the towel on this one and buy a new Arien’s Classic 24 or toss a couple hundred dollars into this old Craftsman to fix it up. My fear is I will spend the money into the old Craftsman and the drivetrain will crap out. For me reliability is extremely important as I work at a hospital and I still have to go to work even if there is 20-inches of snow on the ground.
I’m in the market and looking for knowledgeable feedback. Hearing stories about EFI being a possible weak link.
I live at about 8200 feet. Would the EFI provide more reliable power as it adjusts automatically? Or would a carb tube at altitude be enough to save the HP!
I am planning to get this for around 200$ but i am not sure if this is discontinued by Powersmart ? Also, what are the downsides of battery powered snowblower? I dont want the headache of gas blower maintenance
Hello Reddit, I just stumbled across the Honda Japan Snowblower website. Last year, due to the snow situation in the Northeast, I wanted to purchase a tracked Snowblower so I purchased a Honda HSS724AATD. Now that I’ve seen this site, I want to figure out how to get a HSS960i (JX) lol. One can dream!
After browsing here for couple years, finally purchased this. Its sitting in the garage. I've been starting it up and running it for few minutes every couple weeks. I paid for 2 years extra warranty. Model 921066. It has premium gas in it. Any maintenance suggestions let me know.
I replaced the carburetor and throttle , and i’m still get the rpm’s up. Im at 2500rpm at full throttle. I’m assuming I need adjust the governor? But can’t figure it out. It’s a 8hp Tecumseh. These are the pics I took.
I gave a family friend my 24” craftsman that was a few years old, and replaced it with this old girl. Roughly 20 years old, but still a pretty nice unit. Needed some carb work, and all the usual maintenance items. With a little bit of touch up paint, I’m hoping to keep this 36” running for a long, long time. I think for $600 I did alright.
Community , I was prepping my Ariens 30 deluxe 306cc AX for upcoming winter , I don't know if I snapped it now or last season but the end of the dipstick broke. Is there risk running this ? Does the oil pan have mesh/ filter protection from anything getting in the engine ? Or do I have some serious risk to pull this apart to extract? Thanks everyone.
Edit: to add that I'm 66, and while I can shovel, I've had 2 back surgeries (around 2000) and I have a limit to how long I can shovel heavy snow. We live just outside Philly, so some winters we get little snow, while last winter we got a ton of snow, and I had to pay people to shovel us out twice.
The pictures show no rust and a pretty good looking snowblower.
This is the description from the ad:
Condition
Used - Fair
TORO POWER MAX 28" TWO STAGE SNOW BLOWER (WITH upgraded 305cc BRIGGS & STRATTON 1450 series engine)
IMPORTANT - PLEASE READ: It threw snow for about 20-30 minutes, then stopped throwing snow. Tilted in the air the blades move fine. The second they meet snow resistance they stop. That is why I am including the shear pins I bought.
Features: Electric start + recoil start, built-in 60W charging system (ready for LED/halogen headlight hookup if desired), heavy-duty auger/impeller.
Selling a 100% FACTORY MADE Toro Power Max two-stage snowblower. UPGRADED with a heavy-duty Briggs & Stratton 1450 Professional Series Snow engine (305cc factory installed) built to handle deep, heavy, and wet snow.
Condition: motor in good condition. All necessary maintenance was done. Oil was changed, new filters installed.
THE PROBLEMS: THE AUGERS spin. Here is THE ISSUE: When the AUGERS MEET ANY RESISTANCE they STOP AND SNOW WONT SHOOT FROM THE CHUTE.
Everything auger wise on the snowblower WORKED FOR ABOUT 30 MINS LAST STORM. Before it just stopped throwing snow.
THE MOTOR HAS RUN STRONG THE ENTIRE TIME. I am mechanically inclined and I am positive that in the hands of the right person this could be fixed and used within an hour. I am a plumber and just dont have the time to figure it out.
I will provide all the shear pins and what not I bought as well. The left tire just needs a plug as well.
Google AI tells me the problem (as stated) is likely a stripped gear box.
I'm pretty handy and so far have been able to fix everything I've tried to fix, so... If we can determine the issue I can likely buy the parts and fix it myself.
Unboxing the new Worx snowblower - specs and features. We will be testing the runtime claims and will share our experience. We are interested to see how much it will be able to clear.
I have had an Ariens Compact 24 for about ten hears now that starts and runs but recently it has been starting to misfire. Here is what I have done so far: -Drained and cleaned the carburetor -Drained and swapped gas for fresh gas -Changed the engine oil -Put a new Spark plug -Greased the gears and put anti-seize on gears etc. (unrelated I guess) -Inspected the belt, seems to be in good condition still
It misfires when it is on any choke. I feel like I’ve done everything by now but obviously I am missing something. Is it time to buy a new carburetor maybe?
I have a MTD 24" gas snowblower w/o a electric starter here in Milwaukee. I got it from Menards years ago. I hate relying solely on this snowblower considering its over 15 years old and it has a pull starter.
I maintain it very well. Oil, Belts, cord, plug, scrape bar, crank assembly and shoes have all been replaced over the years. Plus, this year i developed muscle spasms in my shoulder that can come and go if I stress it too much. It did leave me hanging one winter when the pull cord disintegrated after two pulls on a cold day. I had tested that same cord that summer w/o issues.
Since i can't retrofit a electric starter on this model, which i like, should i consider a second 24 or 26in. snowblower w/ electric starter?
Just bought a used Toro model 37798. When I start it there seems to be a knocking sound (see video). So much tkt the point that the snowblower is moving on its own. Any ideas?
I have a 20 some year old Ariens blower with a Tecumseh 8 horsepower motor , she is running a little rough, was advised to try a little Sea Foam fuel treatment, thoughts , reviews please