r/Snowblowers • • Jan 31 '26

Maintenance Exhaust pipe extension??

Post image
9 Upvotes

Anybody know of a kit that I could buy to redirect my exhaust… I’m picturing a pipe taking a 90 degree turn as soon as it comes out of the exhaust port and running 3-4 feet vertically with a flapper rain cap.

Kind of like a tractor exhaust setup

Main goal is to redirect the exhaust fumes up and away from me. I realize all 2 stage snowblowers have the traditional setup with those tiny lil mufflers attached directly to the exhaust port but I’ve always hated that setup cause you end up walking directly into the exhaust fumes. Trying to see if there’s an easy way to redirect the fumes?


r/Snowblowers • • Mar 09 '25

Review Range King (MTD) 8/28 is a beast.

0 Upvotes

Picked this snowblower up for $40 off facebook marketplace. MTD made these snowblowers. Plenty of power, was handling wet slushy snow no problem. It’s heavy but it eats.


r/Snowblowers • • Jan 28 '26

Review My experience with Ariens and how I ended up with a Toro

Thumbnail
gallery
0 Upvotes

TLDR: Ariens chewed two belts, pulley came loose, carbs fucked, governor failed and made piston soup. Under warranty repair and out of commission until May. Bought a Toro 824 out of frustration. It's aight.

I would like to preface that my experience does not lower Ariens in my regards at all. I love them, and when my unit worked properly, I loved it as well. Lemons happen, and unfortunately mine has left me needing a second snowblower in interrim.

As a recent homeowner, snow removal looms in the back of our minds as the colder weather sets in. Being of the mindset of "buy once, cry once", I had my heart set on an Ariens for my snow removal needs, as living out in the sticks with a 24 car driveway, meant reliability and adequate performance would be paramount. In my part of Canada, there isn't an incredible amount of authorized dealers, most being 45- 80 minutes away, making the convenient option being a chain store. Initially wanting a Toro Powermax 824OE because the Home Depot was 15 minutes away, I saw that a Rona depot had a deluxe left in inventory, and was 40 minutes away.

Driving off with newfound sense of determination and slight smugness would soon be met with slight disappointment. Upon arrival, the manager informed me the last deluxe was just sold, and that Rona would no longer be selling anymore Ariens.

Bummer.

Not one to waste a trip, I noticed there was a 24" Classic for sale for 1599$. As I inspected it, it became apparent this model has been used prior; dings and paint chips in the bucket and chute, small surface rust on the exhaust, and a small tear in the handle foam on the underside. This didn't bother me and I shot my shot with the store manager.

"This unit has been clearly used. I would be interested in purchasing it but not at advertised price. Can we work something out?"

"Let me know what you have in mind and I'll ask my supervisor "

"1050 plus tax".

And before I knew it, I was hauling off my new to me Ariens into my truck for the modest Canadian sum of 1200 odd dollars.

And so the waiting game begins.

First snow fall arrived in mid November, and it may as well have been Christmas for me. Loving anything with an engine and tires, I relished in the fact I was to conquer mother nature with a carefully crafted blend of steel, aluminum, and petroleum byproducts.

First use left me underwhelmed. It was a modest snowfall, and I recall a modest 8 or so inches. "It was wet, obviously it wouldn't throw as far as advertised" I told myself with a mild feeling of regret. The engine would belch black smoke on full choke and backfire, and stumble slightly at idle, and surge ever so slightly under load.

Odd. A new machine shouldn't need a carb cleaning. I figured a bit of seafoam should straighten the old gal out.

It did not.

Not one to take less than optimal performance for an answer, I tore into the carburetor as well as installed an impeller kit. As I tore the carburetor apart, 2 things came to mind; That the engineering while simple, was moderately frustrating to take a part and some parts could have been better thought out. The belt cover needing to be squeezed in behind the chute, as well as how the fuel line cover held in place made me question how many times it would hold up to reassembly long term. I noticed that the wiring for the ignition key showed signs of fraying, most likely to vibration causing it to rub somewhere it should not. Whatever. It will be a problem when it will be a problem.

The carburetor was astonishingly clean. Admittedly having ran 500ml of seafoam over the span of several uses, this could be expected. For good measure, I meticulously cleaned everything, and blew compreased air in the fuel line in case there was anything gumming up or restricting flow.

The following snowfall was slightly more demanding. We were looking at approximately 12 inches in the span of a fortnight, and eager to test my newly redone machine, went to work at the crack of dawn.

Disaster struck. Reaching the end of my driveway to plow the bank at the entrance, the auger completely stopped. I inspected the bucket, thinking it would have been jammed up, but was clear.

"This must be those famous shear pins that have finally gave" I told myself. I pushed the orange unit into my garage, ready to install the new pins I had ordered preemptively only to be met with two intact shear pins, openly mocking my theory.

That's when I noticed the belt cover had a perfectly round hole, as if someone were to have taken a holesaw to it and drill it out.

Welp. Removing the belt cover revealed that the pulley holding the drive and auger belts in place had come loose, sliding forward, cutting into the belt cover, and shredding both belts. While extremely frustrating, I was able to justify to myself that large scale manufacturing can leave to some faults and I just lost the luck of the draw. Daddy Ariens could do no wrong, they are the king of snow, afterall. The sticker included with my snowblower proudly attested to that as it laid on the front of my toolbox.

2 belts later and a peculiar mix of scotch, swearing, and more mild frustration left me with what would hopefully be a functional unit for long to come. Prior endeavor left me in the ideal position to recheck all bolts were snug, and figured I may as well rust proof it.

And for the better part of December and January, my snowblowing was uneventful. The new belts and carb cleaning left the machine feeling like it has a new take on life. While it still belched black smoke on full choke, the stumbling was gone, and it felt like it had more power, as it would bog down less on those nasty banks, and seemed to throw further.

As many people in north America dreaded this weekend's past storm, I could not have been more eager. "Finally a storm that could put my Ariens through its paces!" I thought to myself.

I had just finished stacking 5 cords of firewood, and refueling my inventory of gas cans and toys. I was ready for whatever mother nature had to throw at us.

We were left with about 15 inches of snow, and I could not have been happier. The Ariens was taking everything mother nature has thrown at it and demanded more. I made a path so my kids can walk to school, and finished blowing a circuit around my garage so my dog can run without being caught in deep snow. Navigating towards the driveway would be where my little classic would meet its untimely demise. As I had finished clearing the snowbank, I let go of the auger and drive lever to toss it in reverse and reposition myself. As I hit the auger lever, the engine surged with no slow down, and shut off.

"Oh. Oh no"

I went back to the garage with my unit, head hanging low as the pit in my stomach grew deeper. This is probably not something I can fix myself, and here.

I tear into the unit, belts are fine, carb looks fine, governor arms and springs are all in tact. Perhaps it lost index? The tightness of the bolt said otherwise. Low resistance of the governor arm leads me to believe the governor had failed and the engine subsequently created a delicacy known as piston rod soup.

Livid, and with snow still falling, I reached out to Rona, explaining the situation and how problematic this unit has been. Their return policy was only 90 days, and that it must be shipped off to the authorized dealer for repairs and left me with their contact information.

Calling them up, they said it will absolutely be passed on warranty, and I can expect to have my machine back in May.

May.

A lot of snow will fall between now and May, and my credit card company would not back me up for filing a dispute as the merchant is offering a solution, even though it isn't optimal.

I went out and bought that Toro I was initially looking at, and I do have a few key takeaways.

  • The engineering is nice behind the unit. Imperial sockets annoy the shit out of me, but everything was sturdy mechanically and made sense in terms of disassembly. The pulley for the belts are large. I made sure they were well torqued.

  • what a difference 50ccs make! This thing is angry. At first I thought the engine was perhaps broken or defective as it was much quieter than the Ariens (it was borderline deafening and I am already half deaf) at idle, but put it under load and it roars to life and just throws the snow without hesitation.

  • The joy stick is a gimmick. It's really cool, and is fun to play with, fulfilling my ambitions of taking off in a F14 Tomcat all from the comfort of my garage, however I felt more comfortable with the Ariens chute control.

  • I do not like the plastic. The dash, the joy stick, and even the bucket housing has a portion or plastic. I can't help but wonder how well it will hold up long term.

  • I will probably have to tear the carb a part. Idle pops and slightly surges, while under load it is fine.

  • This unit is man sized and a bit of a bear to handle. My biggest gripe with the Ariens Classic is it is small. I stand at a modest 6'2, 250lbs and operating the Ariens leaves me hunched over or arms straight down, not the most comfortable for long term use. The Toro Powermax handles are the perfect height, and those tires really dig in unlike the Ariens smaller ones.

At the end of the day I'm at a bit of a crossroads. I would love to own another Ariens in the future, but I'm thinking I would need a 252cc at minimum and perhaps even in the 300cc range. I enjoy simplicity, I don't want EFI, electric shoot controls, and I don't care for hand warmers. LED lighting is nice and for the cost of the Toro, it is insulting it doesn't have one. A 750$ power smart blower has 2 led lights.

One of these two blowers will be sold, and I'm probably leaning towards keeping the Toro, even though the king of snow continually beckons me.

Anyway, thanks for coming to my Ted talk.


r/Snowblowers • • Feb 01 '26

Maintenance Fuel selector knob snapped - no questions please

Thumbnail
gallery
0 Upvotes

I could tell you what happened but it’s probably exactly what you’re thinking, and yeah I’m an idiot.

Ariens compact 24 - 5th season

Anyway, runs fine. I can leave it on or move it back and forth as needed. Is this worth repairing? Any idea on how (or if I just take it to a shop what to expect)?


r/Snowblowers • • Dec 06 '22

Would you sell your Honda snowblower for this beast? People love it 😍

0 Upvotes

r/Snowblowers • • 1d ago

Maintenance Exchange or Spray Paint

Thumbnail
gallery
1 Upvotes

Brand new Ariens Compact. Noticed a section that was not sprayed on the impeller from the factory. Exchange for a new unit or cover the spot myself?


r/Snowblowers • • Dec 15 '25

Maintenance Ariens ST24E, Right Auger Loose

0 Upvotes

My son was doing some neighbor's driveways and caught a stick in the auger. The right side ager now doesn't spin when engaged. The left side works just fine so I can get by with kight, fluffy snow, but anything wet/heavy just plugs up the right side when driving and becomes a wall of snow I have to clear to move. The auger spins freely with a touch so it's completely detached from something (left side when shown in the video). Is it possible/worth fixing?


r/Snowblowers • • Sep 25 '26

Buying Incase anyones in the market for Ego snowblowers, they’re $200 off at Rona

Post image
1 Upvotes

I’m thinking of getting one of the above, does anyone know if this is the lowest they go in Ontario, Canada? Should i wait?


r/Snowblowers • • Dec 14 '25

Maintenance Only one auger blade moving.

6 Upvotes

(Sorry in advance I am not familiar with all the names of the parts/ the most mechanically inclined person) But I powered up my snowblower for the first time this winter and was running fine, but I noticed only one side of my auger is moving while trying to move snow. While shut off both sides move freely, but one stops when I push it back, and one spins both ways (one that is not turning while running). Any ideas what’s could be wrong with it?


r/Snowblowers • • Dec 27 '25

Maintenance Why do I suck at snow blowing?

Post image
6 Upvotes

I bought a Troy built 2 stage snowblower 2 years ago and figured I’d be able to power through my driveway when it snows. Well, either I’m doing something wrong, or my snowblower sucks because I spend an hour working on it and it looks like this at best, always leaves a layer of snow that’s impossible to remove. Meanwhile, all my neighbors have mostly black top showing. (The walkway is cleaner because I shoveled it).

Is it me, my snowblower, or something else?

I have tried

Oiling the augers Adjusting the skid shoes Pushing down while engaged

Nothing gets it all

Why are my neighbors so much better than me? Any tips?


r/Snowblowers • • Apr 21 '26

Ariens Ariens rant

1 Upvotes

About 28", not larger so it would fit through the service door, powerful, good blower for the task of blowing snow. Bought the optional engine, glad I did. Have an alley crowded w/ garages to clear, and an alley entrance that gets plowed in by the city. Can have to throw a lot of snow a long way.

Draining the gas at the end of the season, otoh, is a bitch. The tank is shallow & wide. Have to remove a beauty panel first & to do that have to remove the electric starter switch. Then have to remove bolts holding the tank one of which is hidden under the tank. Pulling the gas hose is a struggle too because there's little slack and the nipple is partially hidden by another beauty panel that doesn't come off easily. Then the fill is in the center so no tipping the tank over to drain, have to pour slowly, slowly out the valve nipple. Putting it back is a struggle especially getting the bolt that's underneath to start. Annual headache.


r/Snowblowers • • Jan 18 '25

i know absolutely nothing about these, how to start?

Post image
5 Upvotes

no choke as it’s an efi, kind of wish they didn’t add all of this technology to make it so complicated to start an engine.


r/Snowblowers • • Jan 24 '26

[Snowblower Brand Editable] New club cadet as soon as I start it then it moves unless I hold down brake. Is that how this is??

Post image
0 Upvotes

r/Snowblowers • • Jan 18 '26

Buying Does anyone else have this happen to them?

Thumbnail
gallery
0 Upvotes

I just bought an ariens 824e shown in second picture last week for 400 cad (290 usd) after months of searching for a good deal, and low and behold, this shows up for 650 cad (465 usd). I hate even though I have enough snowblowers, I still end up looking for more even though I dont need them, and kick myself for buying the last one... does this happen to anyone else here?


r/Snowblowers • • Jan 26 '26

Maintenance Do you wear hearing protection while snowblowing? (Upvote yes or no below)

179 Upvotes

Do you wear hearing protection while snowblowing? (Upvote yes or no below)


r/Snowblowers • • Oct 05 '26

Buying Looking for recommendations for a 2 stage electric snowblower. First time ever buying a snowblower. Fargo area so pretty substantial snow.

0 Upvotes

THANK YOU!


r/Snowblowers • • Dec 24 '25

Maintenance Does this look right?

0 Upvotes

Replace the auger belt, trying to make sure this is the correct speed it should be going


r/Snowblowers • • Jan 29 '22

Just used the snow blower, and now some of my rooms smell like straight gas, is this ok? Do I need to go out of my home to air it all out? Will I get carbon monoxide poisoning? I was in the room for 10-15 mins.

0 Upvotes

r/Snowblowers • • Mar 02 '25

Buying How long to clear snow?

0 Upvotes

Looking at a property in snow country, and the driveway is approximately 4000 square feet, flat and gravel. I was looking at an Ariens Platinum 30” SHO snowblower. Assuming a medium density, 6” snowfall, about how long would it take to clear this much snow? I have no idea if thats 2 hours or 30 minutes. Trying to decide between snowblowing and hiring a plow. Thanks!


r/Snowblowers • • Jan 19 '24

Can we stop calling these ignition ground interrupters a "key" 🤔😒

Post image
0 Upvotes

r/Snowblowers • • Nov 18 '23

Is it weird to wash the snowblower? Literally love this thing. So does my car!

Thumbnail
gallery
13 Upvotes

Ariens + Supra is a somewhat odd family :):)


r/Snowblowers • • Feb 07 '26

Buying Is this a good deal?

Post image
6 Upvotes

r/Snowblowers • • Jan 11 '26

Ariens Really Ariens ? Why ?

Post image
44 Upvotes

just took delivery of a Kraken. I was very excited to see it with my own eyes so I uncrated it before I left for work. Then I noticed that for some reason, even though the machine cost 5K they skimped out on the keys. Why in the world would Ariens ship these machines with one key that has a weather protection boot on it and the second key looking like it was a knock off copy from Walmart because the original one was lost. What a shame.


r/Snowblowers • • 22d ago

Buying Yard Force 30” 420cc vs Troy-Bilt Storm 2435 24” 243cc — which is the better buy?

Thumbnail
gallery
1 Upvotes

Trying to decide between these two Costco options:

Yard Force 30” — $1,499.99
30” width, 420cc engine, up to 21” depth, 49’ throw, heated grips, SES system, 326 lb, 2-year warranty

Troy-Bilt Storm 2435 — $1,899.99
24” width, 243cc engine, up to 12” depth, Touch N’ Turn power steering, heated grips, 215 lb, 3-year warranty

Yard Force is cheaper and more powerful on paper but heavier and a lesser-known brand. Troy-Bilt is lighter, easier to maneuver (power steering), better warranty, but narrower and more expensive.

Which would you pick and why? Any experience with either?

Also open to better suggestions up to ~$2,000 CAD + HST in the Mississauga, Ontario area. Thanks!