I have a 2015 Chevy Silverado 1500 4x4 with 120,000 miles on it. A few months ago it started clicking now and again when I started it. Then it happened more frequently until one day it just wouldn’t start. I jumped it, started right up, and I replaced the battery. Worked fine for a day then wouldn’t start. Again, I jumped it and got it going right away and took it to my mechanic. They checked for a parasitic drain, none. They checked the old battery, (a couple years old, top quality though,) perfect and strong. They checked the alternator and it was fine too. It started fine for them. I took it back, and it worked for a few days then wouldn’t start. I jumped it and took it back to the mechanic. We decided to change the alternator but during the attempted removal the mechanic found a loose ground wire. He tightened that and gave it back to me and it worked like new for a couple months.
It started the same old random clicking a couple weeks ago. Now it won’t start. Same thing with the lights and the battery. Voltmeter is reading 12.4, even after sitting for a couple days. I’m sure it’s the ground wire. But this time when I tried to jump it, it wouldn’t start. Obviously before when I jumped it I thought it was a power issue not a grounding issue, but I assumed because it jumped before it would jump this time. Is there a reason why it would work to jump it then and not now?
Also, to clarify: battery is charged properly, not draining and holding a charge even after several days of sitting. When I turn the key the lights come on, the dash lights do their sequence, but nothing happens. If I hold the key on I can hear it cycle electronically (I assume that the low hum I hear around the middle front floorboard area for a few seconds before stopping is electronic) and then nothing.
I want to spend as little money as possible so when I do have it taken to my mechanic I can tell him what I want done rather than send him on a wild goose chase or pay for another diagnostic. As of now, with what I know, I’d ask him to check all grounding wires, clean the areas around them, look for crimps or frays in the wires and replace if necessary. Is there something else I should be considering, though?