r/Silverado • • 42m ago

Tengo una silverado 2006 5.3 y tiene un golpeteo alguien que me diga que puede ser

1 Upvotes

r/Silverado • • 42m ago

Why is my truck not starting? Battery isn’t draining and alternator is good.

1 Upvotes

I have a 2015 Chevy Silverado 1500 4x4 with 120,000 miles on it. A few months ago it started clicking now and again when I started it. Then it happened more frequently until one day it just wouldn’t start. I jumped it, started right up, and I replaced the battery. Worked fine for a day then wouldn’t start. Again, I jumped it and got it going right away and took it to my mechanic. They checked for a parasitic drain, none. They checked the old battery, (a couple years old, top quality though,) perfect and strong. They checked the alternator and it was fine too. It started fine for them. I took it back, and it worked for a few days then wouldn’t start. I jumped it and took it back to the mechanic. We decided to change the alternator but during the attempted removal the mechanic found a loose ground wire. He tightened that and gave it back to me and it worked like new for a couple months.

It started the same old random clicking a couple weeks ago. Now it won’t start. Same thing with the lights and the battery. Voltmeter is reading 12.4, even after sitting for a couple days. I’m sure it’s the ground wire. But this time when I tried to jump it, it wouldn’t start. Obviously before when I jumped it I thought it was a power issue not a grounding issue, but I assumed because it jumped before it would jump this time. Is there a reason why it would work to jump it then and not now?

Also, to clarify: battery is charged properly, not draining and holding a charge even after several days of sitting. When I turn the key the lights come on, the dash lights do their sequence, but nothing happens. If I hold the key on I can hear it cycle electronically (I assume that the low hum I hear around the middle front floorboard area for a few seconds before stopping is electronic) and then nothing.

I want to spend as little money as possible so when I do have it taken to my mechanic I can tell him what I want done rather than send him on a wild goose chase or pay for another diagnostic. As of now, with what I know, I’d ask him to check all grounding wires, clean the areas around them, look for crimps or frays in the wires and replace if necessary. Is there something else I should be considering, though?


r/Silverado • • 1h ago

Rounded oil drain plug plz help

3 Upvotes

I got under my new-to-me ‘04 2500hd yesterday to find a nearly completely rounded drain plug. There is some edge, but not enough to crank on it. If you know anything about these trucks, you know the exhaust is directly in front of the drain plug (MAYBE 3 inches of clearance max). I cannot hammer an extractor socket onto the bolt. I don’t think it’s extremely tight, but it’s too tight to loosen with a regular 6 point socket without slippage. I don’t know what to do. Please help.


r/Silverado • • 2h ago

2018 Silverado High Country Electrical Issues

1 Upvotes

Inherited a 2018 (56k miles) and discovered some bizarre electrical issues.

  1. Turned on 4x4 for the first time in years; triggered the drivers seat to go completely flat.

  2. Radio volume\\signal goes in and out randomly...at one time I thought it was happening when I turned the steering wheel.

  3. Key in ignition chime doesn't work when the door is open.

  4. Tire pressure sensors went dead one by one in a short amount of time. Probably unrelated.

  5. Parking Assist goes off even if I am no where near another vehicle or pedestrian. Note that it was raining that day.

  6. Lane centering\\Blind Spot Intervention (BSI)\\other safety features do not work.

Where do I begin?


r/Silverado • • 12h ago

Historical trends of Silverado financing deals?

3 Upvotes

I am looking to get into a full-size truck from my Tacoma and want the Silverado. I detailed in my last post why I dislike the truck overall. I want to get a ‘26 with these discounts and 0% apr but I also want to pay off my 6k left on my loan for my Tacoma. Does anyone have insight on if end-of-yr deals like the 0% financing and markdowns always occur with Silverados to get rid of inventory? I am fine waiting a yr until the end of ‘27 to make the move.

Looking for the V8 trim in either custom or LT trail boss


r/Silverado • • 17h ago

Transmission

1 Upvotes

Well y'all, my 22 customs transmission blew fluid everywhere. Was taking a buddy to Tennessee and got the "Transmission overheated idle engine" warning on the way back. Smelled transmission fluid, got out of the truck and it was EVERYWHERE. Only 126k miles on this thing. Has this happened to anyone else? Or has anyone had worse luck with the 2.7?


r/Silverado • • 17h ago

What’s the most confusing code your truck/SUV has ever thrown?

0 Upvotes

I’m curious what codes have given people the most trouble.

Not the easy ones — the ones that:

* didn’t match the real problem
* sent you chasing parts
* kept coming back
* or made absolutely no sense

Drop the code, the truck, and what it ended up being.

I’m trying to understand which codes cause the most headaches for DIY owners.


r/Silverado • • 18h ago

2006 chevy 2500 6.0 5spd.

1 Upvotes

Hello all. I’m a heavy equipment mechanic, and don’t generally mess with automotive.

My dad has a (see title) and is extremely low miles as he got it from my grandpa. Been an amazing truck. When he first got it the slave cylinder was blown out and you couldn’t drive it without starting it in gear and floating the gears. So he bought a new clutch kit from Oriellys with the lifetime warranty, and also a new slave cylinder. We installed the new slave cylinder, installed the new clutch with new pilot bearings. We did some research on how to bleed the clutch system with the internal slave cylinder and it has a bleeder that comes out of the side of the transmission. But online we found that you have to press in the slave cylinder by hand so many times and still bleed it and all this other stuff. In other words a PITA. Anyway we got everything out together and the transmission reinstalled to find that the clutch hooks up very very low. So low that you pretty much have to lock your leg out to get it into gear. This has a plastic pedal as well fyi. The master cylinder has a ball if I remember correctly that connects to the pedal. Well it was thumping real bad and you can tell that the pedal needed to be replaced but dad ended up buying a new master cylinder and we put that on and bled the system again with a vacuum pump bleeder and just kept cycling fluid through the system. After multiple hours of doing this it finally started to hook up higher. After it was hooking up higher and the truck was actually drivable we left it and this all took place around October of 2023.

Fast forward to today. Clutch was slipping, asked me to do it. Said sure no problem I’ll leave the clutch system hooked up so I don’t fuck with that nightmare.
Started yesterday in it and removed the transmission, got the clutch out and sure enough absolutely cooked clutch. (He knows what caused it) got everything reassembled. Everything looks good no other issues. Reinstalled everything, got everything bolted up, and started her up, truck sounds good and all, lo and behold the clutch is hooking really low again. Wtf. It’s dark and raining. I went and picked him up to get his truck, and we tested it again and I broke loose the bleeder and tried bleeding it a little with him pumping it 5 times and holding while I broke the bleeder loose. Absolutely no bubbles coming out of the bleeder. I literally didn’t touch or disconnect anything on the hydraulic side of it. You can get it in the gears and you can drive and shift nice and smooth, but man you have to mash your foot through the floor board to get it to disengage. I let him have it to drive for a day or so to let me know if it works the pressure plate resistance a little less or anything. But I am at a loss. Has anyone else ran into these issues? It has to be a symptom of the new parts. That’s the only thing I can think of. Any help is absolutely greatly appreciated.


r/Silverado • • 18h ago

Help assessing truck value.

Thumbnail gallery
1 Upvotes

r/Silverado • • 18h ago

Help assessing truck value.

Thumbnail gallery
0 Upvotes

r/Silverado • • 19h ago

2005 Silverado Z71 steering wheel

Post image
3 Upvotes

2005 Chevy Silverado Z71 steering wheel feels really stiff when I turn or try and go into reverse. The power steering wheel fluid is good but I’m not sure what else it could be.

Precious work done:

Replaced Transfer case and rebuilt transmission about 4 years ago
Replaced two water pumps over the course of having it for 8 years now.
And replaced the radiator twice already.

There’s about 178k miles on it almost hitting 180k.


r/Silverado • • 20h ago

My neighbor coming down his driveway looks like an awesome Chevy ad

Thumbnail gallery
17 Upvotes

r/Silverado • • 22h ago

Best place for suspension parts?

2 Upvotes

Something broke in front end today. Pulling it apart Monday. I won't know until tomorrow. Rock Auto? Summit? Someplace different? I don't need performance parts. OEM or slightly better is fine. MOOG ok? Ideally I'd want a kit with everything so I don't have to think about it. I watched a YouTube

Big job per side. Driveway job too... F me. Temps in the 40's now


r/Silverado • • 23h ago

Back in a Chevy!

Post image
74 Upvotes

Finally pulled the trigger. 23’ 2.7L Custom with 86k (km).

Love it. Was really surprised at the power the lil bigger could muster.
Bring on the mods 😁


r/Silverado • • 23h ago

Belts and tensioner

2 Upvotes

Looking for the better buy (performance and longevity) for belts and tensioner for ‘15 5.3l.

ACDelco, Gates or Continental on belts and ACDelco or gates on tensioner?


r/Silverado • • 1d ago

You can fit 35’s on 07-13 1500’s.

Thumbnail
gallery
28 Upvotes

Front: Eibach ‘14-‘18 Pro-Truck Stage 2R Coilovers w/ 2” bottom leveling kit. Comes out to about a 3.5” - 4” front lift. I hope for your sake you are not doing this install on a 4x4 like me lol. This was a lot of work.

Rear: 3” blocks w/ Bilstein 5100’s. Careful here because there are two different SKU’s for 5100’s - one stock length, and one with 4” additional travel. These are SKU 24-186636. I haven’t tried the Eibach 2R rear shocks yet but likely will try in the future. Might not be long enough.

Tires: Goodyear Wrangler Territory MT 315/70/R17 (~34.5’s)

Wheels: KMC IMS 17x8.5 +0 in Machined Silver

Naturally you need to do some plastic trimming, haven’t done Norcal yet but rubs a tiny bit at about 75% lock. Norcal would offer 100% clearance.

Only posting this because I found so little information on the internet on how to stuff 35’s on GMT900 and figured I’d try to help out the next person looking like I was.

Really happy with the results.


r/Silverado • • 1d ago

2021 Trail Boss 90k miles. Lifter issues?

0 Upvotes

Hey guys. Considering buying a used 2021 Trail Boss with 90k miles.

I’ve never had a Chevy but have heard a lot about lifter issues.

Is this a pass at this mileage? Everything looks solid from what I can tell

Edit
Sorry - should clarify it has 5.3


r/Silverado • • 1d ago

Anyone still running carpet mats in their 1500?

Thumbnail
gallery
19 Upvotes

Just curious what everyone prefers. I switched to all weather mats a while back and haven’t really wanted to go back, mostly because they’re easier to deal with when the truck gets dirty. But I know some people still swear by carpet mats. What’s your preference?


r/Silverado • • 1d ago

Turbomax to duramax?

8 Upvotes

Anybody go from a turbomax to a duramax? I have a 25 1500 trail boss turbomax, its been just fine zero complaints. But im starting to put on some hefty highway miles and may start towing a small camper, all within the capability of the turbomax..but owning a babymax sounds fun and i hear its effortless on the highways. I know of the crankshaft issues 25-26 models so ill either get a lightly used 23-24 or later model 26. Curious about anybodys thoughts. And i am well aware of the pricier oil changes, DEF, and the belt that needs replacing at 150-200k


r/Silverado • • 1d ago

Looking for a 5.3LS

1 Upvotes

Looking for a good running LS 5.3, if you got one shoot me a DM. Im in az


r/Silverado • • 1d ago

AEV Salta XD with Michelin LTX A/T 275/70/18 2020 LT 2500hd

Thumbnail
gallery
17 Upvotes

Got a great deal


r/Silverado • • 1d ago

Repair shop has had my truck for a month

Thumbnail reddit.com
1 Upvotes

I bought a 2017 Silverado with a 6.2 from my uncle back in August. In September of last year my uncles friend brought the truck in for an engine rebuild and a transmission rebuild. Once the rebuild was done my uncles friend could not pay for the repairs so they switched the customers name over to my uncle. My uncle was finally able to pick up the truck in May. Then in June the truck lost oil pressure and had to be taken back to the shop to replace the oil pump. After that the truck was running great until I noticed the truck was running rough at idle and didn’t seem to have the power it used to. Not long after that I got a check engine light so I brought it to a dealership. I told the dealership the history of the truck and they said they would take a look at it for me. After two days the dealership told me I had two codes P050D and P06DD and they couldn’t find out what was causing it and didn’t want to take anything apart because it would void the warranty on the engine rebuild. When I left the dealership the check engine light was on but when I got home the engine light was off so I decided to keep driving the truck. About a week or two later the light came back on but I knew I was also due for an oil change so I went ahead and did it myself. Just out of curiosity I cut open the oil filter and found some pretty good chunks of metal. I called the shop that did the rebuild and they told me it was normal to have metal in the oil but I told them the truck has had three different oil changes and has been driven 5,000 miles since the rebuild. They told me they would take a look at it so I had the truck shipped down from Oklahoma to Texas to the shop that did the rebuild. It now has been a month since I had the truck shipped and I’ve called them three times to see how it was going with truck and every time they say we’re busy and haven’t gotten to it yet but we’ll call you when we get to it. Then about a week ago I called them and they said since the truck has technically been through three owners since the rebuild we probably won’t be able to do any repairs under the warranty. Since then I have not been able to get a hold of the dealership. Does anyone have advice on how to deal with the shop? Or should I just pick up the shop and have someone else look at it? And does anyone know if there is a legal way I could get the shop to pay for any repairs if they refuse to do work under their warranty.


r/Silverado • • 1d ago

Valve stem extenders for a '26 3500 DRW

1 Upvotes

Any recommendations on what works well for this? I have the 18" aluminum wheels. It's a pain to get at the inner wheels to top the air off.

Would a 4-6" extension that I just use when inflating be the best way to go?


r/Silverado • • 1d ago

Is it worth spending 13000$ on a 2000 chevrolet 1500 shortbed z71 with 130k miles

Thumbnail
gallery
99 Upvotes