I’ve been trying to take in these jeans using my janome 234 sewing machine, but it doesn’t look like the bottom thread is being pulled through the fabric. So, when i sew the needle just goes through the fabric and sews the top and bottom thread together. None of the thread is being brought through the fabric.
i bought new needles, varying sizes, as well as denim thread. At first, i used the same denim thread in the bobbin as in the top thread, but learned that’s incorrect. So, i have the denim thread at the top, then a regular polyester thread in the bobbin.
I’m using 16/100 needle. Before (with the denim thread only, top and bottom) i was using 14/90. When i was sewing with these conditions, the thread was “bird nesting” (i think is the right term) under the fabric.
Making the switch in needle size and correcting the bobbin by using regular polyester thread instead of the denim made little to no difference. I watched a video and followed it to make changes to the tension and stitch length. Tension is at a 4 (it goes up to 9) and length is at a 3. I’m using a straight stitch.
I’ve attached some photos of the fabric thickness, the failed attempts, etc.
I’m still a beginner, so i apologize if i use terms incorrectly. I tried to provide as much information as possible too, so i’m sorry about the lengthy text.
i haven’t sewed denim on this machine before. Usually just cotton sweaters or light weight tops.
The denim is 100% cotton. Any tips would be appreciated :)) thank you!