r/SewingForBeginners • • Jul 03 '26 Bravo

Type Matters: Sewing Machine Needle Guide

Post image
200 Upvotes

Sewing machine needles come in a variety of sizes and types and many of the problems I see online are caused by using the wrong needle type.

Generally when you buy a machine it comes with universal needles in the box. Universal is a misnomer. They are very useful on a wide variety of woven fabrics. Universal needles in a size 12 are what I use for anything that is a medium weight woven.

Jeans needles are for heavy fabrics like denim and canvas. Generally I go up to a 14 or 16 in a jeans needle.

Microtex needles are super sharp. They are excellent for woven fabrics that are delicate, snag easily, or are tightly woven. I use them on silks, satin, and cotton poplins. When all else fails on a fabric, try a microtex. Microtex come in larger sizes and can be used on heavy fabrics. Microtex needles need replaced more frequently than other needle types.

Ballpoint or Jersey needles are the same thing, usually they are labeled as ballpoint in the US and Jersey elsewhere. Ballpoint needles are appropriate for stable knit such as cotton jersey with no or minimal stretch fibers added.

Stretch needles are similar to ballpoint needles in the sense that they are for knit fabrics. Stretch needles are intended for fabrics with a higher stretch fiber percentage and in addition to that they work well on more stable knits. They are what I keep in stock for working with the widest variety of knit fabrics. I usually buy 11 or 12 in stretch needles.

Super stretch are for super stretchy problem child knits, I have not tried these as they are relatively new on the market but I will be picking up a pack before I make swimwear again.

In addition to the types above there are a great many other needles with specific uses. Within each type there is a range of sizes and the needle size should be chosen to match your fabric and thread.

Needles are consumables and will become gradually dull as you sew. The rule of thumb is that you need to replace after roughly 8 hours of run time. If you have been using a needle for a while and things start to go wrong or the machine sound changes, the first step on troubleshooting is a new needle. Old needles can damage your fabric and are more likely to break.

I also want to advise against buying off brand needles and included in that category are Singer branded needles. I personally only buy schmetz and organ brand needles and I buy exclusively off wawak.com (US and Canada only).

Schmetz has a good guide to machine needle types. https://www.schmetzneedles.com/pages/sewing-machine-needle-chart

Wawak also has a guide on matching thread tex size to needles

https://blog.wawak.com/post/sewing-machine-needle-and-thread-size-chart


r/SewingForBeginners • • Mar 28 '26

📖 Our community wiki is here — and we want your suggestions!

64 Upvotes

Hey r/SewingForBeginners! 👋

We've been quietly working on something we hope makes this community a lot more useful — and today we're excited to share it with you.

What's in the wiki?

We built it to answer the questions we see every week — so whether you're picking up a needle for the very first time or you've been at it a few months and hit a wall, there's something in here for you.

Here's what's covered:

🧵 Getting started — What to make first, hand vs. machine, and the YouTube channels worth bookmarking

🪡 Machine buying guide — Budget breakdowns, brand recommendations, and how to buy a great secondhand machine

✂️ Tools & notions glossary — Every tool explained in plain English, plus what you actually need to start vs. what's nice to have later

🔧 Techniques & troubleshooting — Pressing, seam finishes, backstitching, and a troubleshooting table for the most common machine gremlins

📐 Pattern reading & sizing — Why sewing sizes aren't clothing sizes, how to read pattern markings, and what "ease" means

🎨 Fabric guide — Wovens vs. knits, beginner-friendly fabric types, pre-washing, and where to buy

🔗 Community resources — Our curated list of YouTube channels, blogs, and related communities

❓ FAQ — Detailed answers to the questions we see most often

This wiki belongs to all of us — and we need your help

A wiki is only as good as the community behind it. We're a team of moderators, not an encyclopedia, and we know there are gaps, things we got slightly wrong, and questions we haven't thought to answer yet.

That's where you come in.

We want to hear from you if:

  • 💡 There's a topic you wish had been covered when you were starting out

  • 🐛 Something in the wiki is unclear, out of date, or just wrong

  • 🔗 You know a great resource (video, blog, pattern, tool) that should be listed

  • ❓ You've seen a question come up over and over in the sub that deserves a proper answer

  • ✍️ You'd like to contribute a write-up on something you know well

How to send a suggestion

Drop your suggestion right here in the comments. Tell us:

  1. Which section it relates to (or if it should be a new section entirely)

  2. What you'd like added, changed, or corrected

  3. Any links or sources that would help

You can also message the mod team directly if you'd prefer, especially for corrections or anything that needs a longer explanation.

We'll review every suggestion and update the wiki regularly. If your contribution makes it in, we'll do our best to acknowledge it — this is genuinely a community project and we want it to reflect the knowledge that lives here.

A note on what makes this community special

This subreddit exists because sewing has a steep early learning curve and a long tradition of people helping each other climb it. Every question answered, every "here's what worked for me," every photo of a wonky first pillowcase posted with pride — that's what makes r/SewingForBeginners worth showing up to.

The wiki is our attempt to bottle some of that up so it doesn't get lost in the scroll. But it'll never replace the real thing, which is all of you asking and answering in the comments every day.

Thank you for being part of this. Now go make something. 🧵

— The r/SewingForBeginners mod team

Let me know if the link isn't visible on the main subreddit page. It appears on mine.


r/SewingForBeginners • • 11h ago

First time sewing and I MADE MY BIRTHDAY DRESS

Thumbnail gallery
357 Upvotes

Still can’t quite believe I made this myself! My first ever sewing project! 🥹


r/SewingForBeginners • • 7h ago

Goodwill gold!

Post image
137 Upvotes

Hi all, posting because I had to share this ridiculously good find at my local goodwill!! A brand new Rowenta steam iron!

I was going to buy on their black Friday sale, but I was apprehensive to buy an expensive iron. Not a problem anymore! $17 for this bad boy - Came with the protective film over the metal and everything. Heats up nice and quick. I’m so happy and excited to use it!!!


r/SewingForBeginners • • 13h ago

I sewed my first sleeve shirt

Thumbnail
gallery
202 Upvotes

It’s not perfect, but I’m happy overall with my learning experience 😊


r/SewingForBeginners • • 8h ago

First project on the Singer 403a

Post image
66 Upvotes

New to sewing. Yesterday I picked up a Singer 403a from a local guy who buys/fixes/sells vintage machines. Put together this Kindle slip case w/ front pockets as a Christmas gift today. Learned a lot in the process. Not sure if this is the final version - I guess that will be determined if the page turner clicker thing fits in the front right pocket or not. Having fun so far.

If I give it another go I'll probably change the binding from white to a different color like grey/teal/light green etc.


r/SewingForBeginners • • 7h ago

Sewed my first and probably last quilt today

Post image
43 Upvotes

I've always been curious about quilting since I sew quite a bit. So I took some scrap fabric and made simple blocks for the top and used forest green fleece for the back.

It took me about 4 hours of cutting, piecing, sewing, ironing, for just a small blanket and I haven't even binded it together yet. I know my baby niece will get some use out of it and won't notice the misaligned blocks, but I don't think quilting is for me, and I am so glad I tried it!


r/SewingForBeginners • • 5h ago

Strapless babydoll dress

Thumbnail
gallery
13 Upvotes

My first time sewing a dress! I made a strapless babydoll dress. I might add straps and turn it into a nightgown.


r/SewingForBeginners • • 10h ago

New jeans!

Thumbnail
gallery
22 Upvotes

This is the M983 selvedge denim jeans pattern from angelakane.com. I tried this pattern almost a year ago and completely messed things up, starting with choosing the wrong size. I'm very happy with the outcome this time. Since this is heavy selvedge denim, the drape isn't beautiful yet, but this raw denim will break in, fade, and relax over time. Please offer any and all feedback, as I love learning here!


r/SewingForBeginners • • 3h ago

Sewing help with jeans on Janome 234

Thumbnail
gallery
2 Upvotes

I’ve been trying to take in these jeans using my janome 234 sewing machine, but it doesn’t look like the bottom thread is being pulled through the fabric. So, when i sew the needle just goes through the fabric and sews the top and bottom thread together. None of the thread is being brought through the fabric.

i bought new needles, varying sizes, as well as denim thread. At first, i used the same denim thread in the bobbin as in the top thread, but learned that’s incorrect. So, i have the denim thread at the top, then a regular polyester thread in the bobbin.

I’m using 16/100 needle. Before (with the denim thread only, top and bottom) i was using 14/90. When i was sewing with these conditions, the thread was “bird nesting” (i think is the right term) under the fabric.

Making the switch in needle size and correcting the bobbin by using regular polyester thread instead of the denim made little to no difference. I watched a video and followed it to make changes to the tension and stitch length. Tension is at a 4 (it goes up to 9) and length is at a 3. I’m using a straight stitch.

I’ve attached some photos of the fabric thickness, the failed attempts, etc.

I’m still a beginner, so i apologize if i use terms incorrectly. I tried to provide as much information as possible too, so i’m sorry about the lengthy text.

i haven’t sewed denim on this machine before. Usually just cotton sweaters or light weight tops.
The denim is 100% cotton. Any tips would be appreciated :)) thank you!


r/SewingForBeginners • • 1d ago

My first project 🐟

Thumbnail
gallery
525 Upvotes

Hey gang!

I just got a sewing machine from my mom for my birthday. So happy 😊 I’ve tried a couple project with her help in the past on her machine but this is my first completed one on my own!

My niece has requested a fish shaped pencil case for her upcoming birthday, so this was an attempt at that which turned in to a plushie instead!

Next mission is figuring out zippers and making a pencil case look like this fishy


r/SewingForBeginners • • 4m ago

Shirt button sit too low, is it possible to fix?

Post image
1 Upvotes

Hi all, I just received this waffle henley that's really nice feeling on the skin, the only troubling thing for me is that the last button sit a bit too low, not on my chest as I would want it to. Is it possible to remove the button and move the fabric bundle up? Thank you!


r/SewingForBeginners • • 4h ago

Inspo for sheets, please!

2 Upvotes

We upgraded from a queen to a king recently, so I suddenly find myself with some wonderfully high-quality fabric from the queen bed sets. I'm thinking I'll keep one set for the air mattress but could maybe make some nice clothes with the rest. But I have zero ideas! I have made mostly button-down shirts and a couple dresses for myself that turned out okayish. What do you think?

- Wamsutta 750 thread count in a smoky slate blue

- Tempurpedic similar thread count in a very light blue; oldest set so there are some lighter patches I might need to cut around

- Lacome 650 thread count in a shiny gold

- I also have some beautiful plum colored jersey from a twin bed from my college days

The first three are wonderfully drape-y and of course the jersey is stretchy. I don't particularly care if it looks like a bedsheet; I just typically work with stiffer fabrics and I'm tryyyyying to convince myself not to just make another button down 😂 Skirts? Dresses? What kind? God, I have no ideas.


r/SewingForBeginners • • 51m ago

Half bell sleeves

1 Upvotes

I’m looking to sew a pair of sleeves (?) that start at about the elbow, and open up to be very drapey, like a very wide bell sleeve. I was hoping anyone has advice for what kind of fabric would be best for this product. Thanks!!


r/SewingForBeginners • • 58m ago

I’m sewing leather patches on a blanket

1 Upvotes

How can I start and end the thread? I don’t think a backstitch will work well since it will leave larger holes the thread can work it’s way out overtime.

I assume I leave extra thread before and after, but then maybe thread them all to the back of the blanket and maybe tie them all off? Ideally tucking them between the patch and blanket?

Can anyone recommend the right knots/process?


r/SewingForBeginners • • 12h ago

Design help: How to add full sleeves to this set for modesty without ruining the look?

Post image
6 Upvotes

Hi everyone! I bought this sharara set and I am completely in love with it, but for me to actually get wear out of it, I need to add full-length sleeves to make it practical and modest.

Because I love the original design so much, I’m terrified of adding sleeves that look "tacked on" or clash with the rest of the outfit.

A few quick details:

  • The fabric situation: When I ordered it, I didn't select the brand's "add sleeves" option. They won't send extra fabric separately, and they don't have a reference photo of what their sleeved version looks like either.

  • One idea I have: I’m considering harvesting fabric from the upper part of the sharara bottoms (the section completely hidden under the top) and replacing that hidden panel with a plain matching fabric, then using the harvested fabric for the sleeves. My only hesitation is whether using the sharara fabric on the sleeves would look "too loud" or busy—or if I’m better off just buying a new complementary fabric for the sleeves instead.

  • Skill level: I am doing this myself—I can sew out of necessity, so I can handle basic construction, I just struggle with the design vision part and figuring out what will look cohesive.

  • The goal: Full-length, modest sleeves that look intentional and match the vibe of the original piece.

I just don't really have a clue what to do haha. Thank you in advance and please lmk if I should include any more info!


r/SewingForBeginners • • 9h ago

Just bought my first machine!

3 Upvotes

Snagged a Singer Heavy Duty at Costco for their Black Friday Sale. I inherited my mother's Singer Quantum XL-100, but figured learning on something that'll cost the same as getting that bad boy tuned up might be more fruitful start. I've already seen and read through quite a bit of the negative posts on Singers, but this post isn't about that!

I've never sewn except for one trial piece on the Quantum a couple weeks ago.

Looking to create my own sewing space. I will eventually have L shaped desk that is quite large. Any other tips or tricks for your crafting space? Storage ideas? First-time-sewers must-haves?! Best projects to start with, fabrics to avoid or always go for, should I wait until I have my space set up before I start buying materials and accessories and crud!? So excited.


r/SewingForBeginners • • 4h ago

Interfacing for a Lined Sweatshirt

1 Upvotes

Hi there! I've been scrolling through the backlog of posts asking whether or not interfacing is right for a certain project, but I think I'm still a bit unclear for my case.

I wanna make something akin to a lined crewneck sweatshirt. Basically like a jacket with oversized sleeves, but still using sweatshirt fleece (or a similar fabric) and hopefully with a slouchy drape similar to a normal sweatshirt. I know that interfacing is generally encouraged for stability and longevity, but I don't think any of the sweatshirts I've encountered in the wild have had interfacing. However, I don't know if having a lining would play a factor in this since I do want mine to be lined, whereas sweatshirts are usually a single layer of fabric from what I've seen.

Would interfacing be recommended for this sort of thing? If so, should it be a lightweight interfacing to keep the draping style of a usual sweatshirt, or would a lightweight interfacing not be able to hold the weight of a mid-to-heavy weight sweatshirt fleece?


r/SewingForBeginners • • 4h ago

Dress Form Advice

1 Upvotes

Hello all! My partner has really been enjoying getting back into sewing and specifically dress making lately. Some of the recent things they've done and enjoyed are making princess dresses for our young children, and experimenting with making some clothes that they fit in.

To that end, I'm planning on getting them a couple of adjustable dress forms for Christmas: One for them/other adult sized projects, and one that they can use to keep making costumes/dresses for the little ones. They're aged 3-7, and all fairly petite.

Can anyone help give me some advice on what a good brand would be? A good size? Things to stay away from? The measurements and terminology are kind of a foreign language to me so I'm a bit overwhelmed!

TYIA!!!


r/SewingForBeginners • • 14h ago

back help

Thumbnail
gallery
6 Upvotes

How do I make the back flush to the skin, a dart or two maybe? first project. Its woven non stretchy fabric


r/SewingForBeginners • • 16h ago

How much fabric do I buy?

8 Upvotes

Hey all,

I was hoping someone might be able to provide some insight to my question. I keep wanting to buy fabric when it goes on sale but since I don’t have an outfit/project idea for it yet, I don’t.

Does anyone buy fabric before they have a project idea for it and if so, how much roughly do you buy? I don’t want to buy too little and not be able to make my outfit item but I also don’t want to buy too much as fabric is expensive!

I know it all depends on clothing size as well but just trying to get a rough estimate.

Thank you for any help you can provide!!


r/SewingForBeginners • • 17h ago

Help with t-shirts neckline

Thumbnail
gallery
9 Upvotes

Hi all,

My husband has been asking me for cotton t shirts so I’ve started down that road. Overall, I’ve been moderately successful in making 2 shirts (still figuring out which stretch stitch I like best, adjusting technique, etc). But they are wearable!

My one gripe is the neckline. Both shirts I’ve made have had this issue in the back where the neckline “stands up” and I can’t quite figure out why. I thought he might be too broad for the pattern but it seems to do this on everyone who puts it on. Otherwise I’m very happy with how my necklines are turning out.

The pattern is Men’s Classic T-shirt by Wardrobe by Me in size large. The fabric is 100% cotton jersey and I’ve been using a straight stretch stitch to attach with the walking foot.

Any advice on how to fix this? Also, what is your favorite stretch stitch to use? I’ve been gravitating towards the straight stretch stitch because it’s so secure and I haven’t loved the look I’ve been getting from the various zig zag stitches I’ve tried. I have a Brother CS7000X.

Thanks and happy sewing!


r/SewingForBeginners • • 5h ago

overlocker picking

1 Upvotes

so a sale is happening at spotlight for overlockers and i’m looking between 2 overlockers to buy but i can’t decide between which model. currently i own a singer heavy duty and get the point of having same brand machines but im not being picky for price purposes.

https://www.spotlightstores.com/en-au/p/elna-793y4-heavy-duty-overlocker/BP80560280-black

https://www.spotlightstores.com/en-au/p/brother-2504d-overlocker/BP80393928-white

>$400 (aud) is my preferred budget, and i’m only used to using industrial overlockers for work so my knowledge of these are basic. just looking for community knowledge and experience with these pair of machines and which have better recommendations.

thank u!


r/SewingForBeginners • • 6h ago

Sewing Needles that fit but don’t sew?

1 Upvotes

Complete newbie at sewing. I was given my mom’s vintage Singer machine. I bought some needles for it but they don’t seem to work. I bought these https://a.co/d/09gIqXoZ

Whenever I use the needle that was already in the machine (been in the machine for the last 30+ years), I seem to be able to get it to sew. But when I use the same size of the needles I bought, it will not sew. Can someone explain what this might mean? The sewing needle size was 100/16 if that matters.