r/RetroAR • u/TheRoach42o • 7h ago
H&R M-16a1
Just picked this up. Slapped og furniture on it. Can't decide if I'm happy with the grey anodizing job on it or not. Wouldn't mind it a shade tad lighter.
r/RetroAR • u/TheRoach42o • 7h ago
Just picked this up. Slapped og furniture on it. Can't decide if I'm happy with the grey anodizing job on it or not. Wouldn't mind it a shade tad lighter.
BKings 11.5” 733 style Upper
OCM6
OCL “Midway” mount
RRA Entry Stock
Temp Colt 4x until AGW M5000 can be acquired
CMC 2 stage “Combat Curve” trigger, but will probably replace with FRT w/ normal AR trigger blade
Chrome sand cut KAK down-vent/dual ejector bolt carrier
Had to grind off Bayo lug for clearance, but I like how it came out.
r/RetroAR • u/Reaper01Actual1970 • 2h ago
r/RetroAR • u/ComprehensiveSuit497 • 7h ago
20 dolla makes em holla
r/RetroAR • u/Jristrong • 55m ago
OCM6
DD Omega 7
H&R C7 upper with smith enterprises pic rail
PSA Squirrel-15 lower
Also I have an arcfire v1 with the mill spec trigger (I’ll upgrade the trigger later)
r/RetroAR • u/PsychologyHopeful706 • 7h ago
Is this the right cap for adding a tape switch to a surefire 6p?
r/RetroAR • u/Neo13715 • 2h ago
Hi everyone, I just picked up this nice classic looking M4 AR-15. I got a scout mount (IWC TMC Scout Mount-N-Slot) and went to the local gun store to get it installed because I have pretty weak hands and couldn't push the delta ring down to remove the handguard. They managed to remove it but said the gas tube was interfering with the mount.
I don't want to use another kind of mount, I see that another user made a post of a similar comment regarding the gas tube and installation but his account is since then deleted so I can't ask how or what he did to "bend" the handguard to make it work. How would I go about doing this? Also, a picture of the AR because I'm just proud of how it looks :)

r/RetroAR • u/Flat_chested_male • 1d ago
Left rifle - Colt 14.5” socom barrel, microbest bcg, Aimpoint comp2, bad attitude lower, H&R c7 gray upper, Colton armory car stock, model1 buttpad
Right rifle - centurion 14.5” midlength, OCM5, palmetto m16a2 lower, h&R black A2 upper, microbest chrome and phosphate small bits bcg, b5 car stock and model 1 buttpad.
Polished GI triggers, both have EZ tube gas tubes.
r/RetroAR • u/deviantdeaf • 1d ago
Shown with my 12" 6.5 Grendel retromod C7 carbine that now sports clamshells, CAR stock, CQB handguard rail with Bauer light and P&S grip.
Build data;
14.5 Dirty Bird chrome lined phosphate M4 barrel with pinned F FSB
Brownell carbine gas tube and KAK A2 flash hider with lock nut (I'm lazy lol)
KAC M4 quad rail
Late model black anodized Colt 6520 A2 upper with M4 ramps
Registered SBR Anderson lower (again, dumb state requires Fed paperwork to be lawful 🙄)
Schmidt tool trigger group
CMMG springs and pins
Random A2 grip
Not sure who made this 6 position mil spec sized carbine stock, has same two positions as military 2 position stock plus 4 in between
H2 buffer and spring
Brownell M4 stock with 8FW25 CAGE code
I just need to get it out and do a few mags breaking in and sighting in.
r/RetroAR • u/CeramicCoatingsChef • 2d ago
Receivers cerakoted a retro grey and purple anodizing match. The A2 lower started as a 601 profile 80% that I lasered to look like an overstamp rearsenal lower
r/RetroAR • u/pewsnpizza • 2d ago
M4 / Gordy Clone
Then retro-mod Gordy
Can’t decide how I want it lol
r/RetroAR • u/kill_all_pedophiles_ • 1d ago
Anyone make clamshell handguards for the kitty kat?
r/RetroAR • u/PakRatJR • 1d ago
I'm wanting to recoat a couple of my charging handles using Norrells moly coat.
It needs 300 degrees for a hour or so to cure.
I tried taking one apart years ago and gave up trying to get it back together after struggling with that damn small roll pin and kinda don't want to have to try it again if I don't need to.
r/RetroAR • u/-VictorusAutMortis- • 2d ago
r/RetroAR • u/Signal-Ship • 2d ago
Not sure what you would call it but here we are finally complete
r/RetroAR • u/CrabMan_99 • 3d ago
r/RetroAR • u/WaltzRPK • 3d ago
My RRA midlength HBAR and my ALICE kit. Nothing you haven't seen before, but I'm pretty happy with how they turned out.
The question of what the best tool is for removing and installing the old style spanner nuts has come up at least twice in the last several weeks. Not cheap, but definitely the best.
r/RetroAR • u/Missouri_Pacific • 4d ago
I just got my first actual retro non clone police trade in today. It has the restricted government markings and the name of the police department. I assume the number 5 is the assigned number for this rifle?
There's an S that is taped on the front side of the magwe!!.
Besides cleaning up the rifle with some CLP, I changed out the well greased two stage hammer with a mil spec. Removed the disconnector and replaced it with a trigger kicker. Because my spare Kabuto was not seating correctly. As if the walls were too narrow. I also replaced the BCG with a mil spec M16 version. Yes, plan on keeping the two stage trigger and the original BCG. I have a new version of the Rock River LAR-15 which has the carry handle and the two stage match trigger in it.
It's going to remain stock.
I picked it off of GB for about five Benjamin's.
Obviously it spent all of its time in the midwest.
Fabricated and assembled in Cleveland, Illinois and I assume it was in service in Lansing Illinois which is a suburb of Chicago. Maybe it was Michigan?
Maybe someone else would know? What do ya’ll think?
r/RetroAR • u/PakRatJR • 4d ago
Rifle has actually been built and in use for around 16 years or so, but the modern black lower has always bugged me so I finally picked up a H&R lower to "finish" the rifle properly.
The lower does look nice, but it is sadly way too light gray for my liking.
Is there any easy way to darken it up a bit without having to completely refinish everything to match?
I do have some Norells gray/black Colt that I was thinking I could use for just the lower but that's a bit too dark.
r/RetroAR • u/deviantdeaf • 4d ago
14.5 M4 chrome lined 1:7, FSB barrel from Dirty Bird Industries, KAC M4 quadrail, Colt 6520 A2 upper with M4 feed ramps, SBR registered Anderson lower (I live in a dumb State that requires NFA stamp for most NFA items). Waiting on a few specific parts coming in this week, like carbine gas tube, A2 flash hider with crush washer, and M4 waffle stock from P&S/CAGE coded, all from Brownells. Last pic is of the late Senior Airman EOD tech Elizabeth Loncki who passed away in 2007 from an IED on patrol in Iraq. Her GUU-5/P has been rebuilt with an A2 upper, M4 or 727 barrel and M4 quad rail, M4 broom handle vert grip, with M4 stock installed on the full fence lower. I could not find other pictures showing the full lower so I don't know if it was A1, early A2, late A2 remarked with GUU-5/P markings. There were two main makers of the M4 quadrail and vert grip (either KAC or P&S, often mixed) and several makers for the M4 waffle stocks.
r/RetroAR • u/Radiant_Swan-2 • 4d ago
Hey degenerates, give me all of the information about JSOC Armalite toob 727s and early M4 carbines. Were there non FSB variants? What seemed to be more common integrated carry handle or detachable carry handle, leupold 1-4x like the photo or TA01s. Id assume they all used government profile M4 barrels if not 727 barrels? Thanks in advance for your tism.