r/RetroAR • • 55m ago

Diet Retro Finally putting together a retro-mod build. I’ve picked up what I have here over the last year or two. I’m having decision paralysis on the more functional parts of the build. It’s my first AR, though I’ve owned and shot countless other firearms. Any suggestions on what to prioritize for my budget?

Post image
2 Upvotes

OCM6
DD Omega 7
H&R C7 upper with smith enterprises pic rail
PSA Squirrel-15 lower
Also I have an arcfire v1 with the mill spec trigger (I’ll upgrade the trigger later)


r/RetroAR • • 2h ago

Work In Progress, Chill Out New to ARs, picked up a RRA LAR-15 carbine-need tips on light mount

1 Upvotes

Hi everyone, I just picked up this nice classic looking M4 AR-15. I got a scout mount (IWC TMC Scout Mount-N-Slot) and went to the local gun store to get it installed because I have pretty weak hands and couldn't push the delta ring down to remove the handguard. They managed to remove it but said the gas tube was interfering with the mount.

I don't want to use another kind of mount, I see that another user made a post of a similar comment regarding the gas tube and installation but his account is since then deleted so I can't ask how or what he did to "bend" the handguard to make it work. How would I go about doing this? Also, a picture of the AR because I'm just proud of how it looks :)


r/RetroAR • • 2h ago

Save the date: December 2, 2026 is when oral arguments are scheduled to take place over the specific issue of if local or state governmentd are allowed to restrict or ban AR, AK or other rifles.

Post image
15 Upvotes

r/RetroAR • • 4h ago

Diet Retro Faux Gordy-ish build

Post image
22 Upvotes

BKings 11.5” 733 style Upper
OCM6
OCL “Midway” mount
RRA Entry Stock
Temp Colt 4x until AGW M5000 can be acquired
CMC 2 stage “Combat Curve” trigger, but will probably replace with FRT w/ normal AR trigger blade
Chrome sand cut KAK down-vent/dual ejector bolt carrier
Had to grind off Bayo lug for clearance, but I like how it came out.


r/RetroAR • • 7h ago

Kentucky gunshop find

Post image
28 Upvotes

20 dolla makes em holla


r/RetroAR • • 7h ago

H&R M-16a1

Post image
153 Upvotes

Just picked this up. Slapped og furniture on it. Can't decide if I'm happy with the grey anodizing job on it or not. Wouldn't mind it a shade tad lighter.


r/RetroAR • • 7h ago

Tape switch for 6p

Post image
3 Upvotes

Is this the right cap for adding a tape switch to a surefire 6p?


r/RetroAR • • 1d ago

Diet Retro GUU-5/P GWOT era tribute done for now

Thumbnail
gallery
39 Upvotes

Shown with my 12" 6.5 Grendel retromod C7 carbine that now sports clamshells, CAR stock, CQB handguard rail with Bauer light and P&S grip.

Build data;

14.5 Dirty Bird chrome lined phosphate M4 barrel with pinned F FSB

Brownell carbine gas tube and KAK A2 flash hider with lock nut (I'm lazy lol)

KAC M4 quad rail

Late model black anodized Colt 6520 A2 upper with M4 ramps

Registered SBR Anderson lower (again, dumb state requires Fed paperwork to be lawful 🙄)

Schmidt tool trigger group

CMMG springs and pins

Random A2 grip

Not sure who made this 6 position mil spec sized carbine stock, has same two positions as military 2 position stock plus 4 in between

H2 buffer and spring

Brownell M4 stock with 8FW25 CAGE code

I just need to get it out and do a few mags breaking in and sighting in.


r/RetroAR • • 1d ago

How much heat can a charging handle spring handle?

2 Upvotes

I'm wanting to recoat a couple of my charging handles using Norrells moly coat.

It needs 300 degrees for a hour or so to cure.

I tried taking one apart years ago and gave up trying to get it back together after struggling with that damn small roll pin and kinda don't want to have to try it again if I don't need to.


r/RetroAR • • 1d ago

M4 delta and OCM5 pipes

Post image
110 Upvotes

Left rifle - Colt 14.5” socom barrel, microbest bcg, Aimpoint comp2, bad attitude lower, H&R c7 gray upper, Colton armory car stock, model1 buttpad

Right rifle - centurion 14.5” midlength, OCM5, palmetto m16a2 lower, h&R black A2 upper, microbest chrome and phosphate small bits bcg, b5 car stock and model 1 buttpad.

Polished GI triggers, both have EZ tube gas tubes.


r/RetroAR • • 1d ago

Handguards

Post image
59 Upvotes

Anyone make clamshell handguards for the kitty kat?


r/RetroAR • • 2d ago

Retro / Retro Mod

Thumbnail
gallery
124 Upvotes

M4 / Gordy Clone
Then retro-mod Gordy

Can’t decide how I want it lol


r/RetroAR • • 2d ago

Transitional A2 and DOEish

Post image
218 Upvotes

Receivers cerakoted a retro grey and purple anodizing match. The A2 lower started as a 601 profile 80% that I lasered to look like an overstamp rearsenal lower


r/RetroAR • • 2d ago

That Real Gourmet Shit Need to get another RX01 so I can do this clone justice, but the 518 will do for now

Thumbnail
gallery
154 Upvotes

r/RetroAR • • 2d ago

Work In Progress, Chill Out Finished my a1 build (dont mind the black handle, working on that)

Post image
62 Upvotes

r/RetroAR • • 2d ago

That Real Gourmet Shit Colt AR-15a2 carbine

Thumbnail
gallery
128 Upvotes

Not sure what you would call it but here we are finally complete


r/RetroAR • • 3d ago

BROWNELLS best butt stock tool for spanner nuts back in stock.

Thumbnail
gallery
9 Upvotes

r/RetroAR • • 3d ago

Garden-variety retromod

Thumbnail
gallery
66 Upvotes

My RRA midlength HBAR and my ALICE kit. Nothing you haven't seen before, but I'm pretty happy with how they turned out.


r/RetroAR • • 3d ago

Diet Retro Just because it's old doesn't mean it's not gold

Post image
134 Upvotes

r/RetroAR • • 4d ago

Work In Progress, Chill Out Any way to darken up a lower a bit?

Post image
21 Upvotes

Rifle has actually been built and in use for around 16 years or so, but the modern black lower has always bugged me so I finally picked up a H&R lower to "finish" the rifle properly.

The lower does look nice, but it is sadly way too light gray for my liking.

Is there any easy way to darken it up a bit without having to completely refinish everything to match?

I do have some Norells gray/black Colt that I was thinking I could use for just the lower but that's a bit too dark.


r/RetroAR • • 4d ago

That Real Gourmet Shit RRA LAR-15 PD trade in

Thumbnail
gallery
88 Upvotes

I just got my first actual retro non clone police trade in today. It has the restricted government markings and the name of the police department. I assume the number 5 is the assigned number for this rifle?
There's an S that is taped on the front side of the magwe!!.
Besides cleaning up the rifle with some CLP, I changed out the well greased two stage hammer with a mil spec. Removed the disconnector and replaced it with a trigger kicker. Because my spare Kabuto was not seating correctly. As if the walls were too narrow. I also replaced the BCG with a mil spec M16 version. Yes, plan on keeping the two stage trigger and the original BCG. I have a new version of the Rock River LAR-15 which has the carry handle and the two stage match trigger in it.
It's going to remain stock.
I picked it off of GB for about five Benjamin's.
Obviously it spent all of its time in the midwest.
Fabricated and assembled in Cleveland, Illinois and I assume it was in service in Lansing Illinois which is a suburb of Chicago. Maybe it was Michigan?
Maybe someone else would know? What do ya’ll think?


r/RetroAR • • 4d ago

Diet Retro Quad Rail 605

Thumbnail
gallery
42 Upvotes

r/RetroAR • • 4d ago

Yay or Nay To the Gooseneck

Thumbnail
gallery
144 Upvotes

r/RetroAR • • 4d ago

Work In Progress, Chill Out Work in progress; USAF GUU-5/P mix master, swipe for pics including ref pic

Thumbnail
gallery
44 Upvotes

14.5 M4 chrome lined 1:7, FSB barrel from Dirty Bird Industries, KAC M4 quadrail, Colt 6520 A2 upper with M4 feed ramps, SBR registered Anderson lower (I live in a dumb State that requires NFA stamp for most NFA items). Waiting on a few specific parts coming in this week, like carbine gas tube, A2 flash hider with crush washer, and M4 waffle stock from P&S/CAGE coded, all from Brownells. Last pic is of the late Senior Airman EOD tech Elizabeth Loncki who passed away in 2007 from an IED on patrol in Iraq. Her GUU-5/P has been rebuilt with an A2 upper, M4 or 727 barrel and M4 quad rail, M4 broom handle vert grip, with M4 stock installed on the full fence lower. I could not find other pictures showing the full lower so I don't know if it was A1, early A2, late A2 remarked with GUU-5/P markings. There were two main makers of the M4 quadrail and vert grip (either KAC or P&S, often mixed) and several makers for the M4 waffle stocks.


r/RetroAR • • 4d ago

Work In Progress, Chill Out Build advice

Thumbnail
gallery
40 Upvotes

I picked up an LEO bushmaster a2 carbine with a surefire m500about a year ago. It now wears a 14.5 barrel and a malkoff in the surefire. I originally wanted to keep it as retro as possible but I'm really starting to like it for more than just vibes.

Has anyone used the Midwest 2 piece free floats? It would be a considerable ergonomic upgrade.