r/RepTimeQC • • 1m ago

Advice

Post image
1 Upvotes

Could someone tell me how “good” this watch is and how much it is worth?


r/RepTimeQC • • 32m ago

QC RICH GMT Master II Batgirl (free sprung)

Thumbnail
gallery
1 Upvotes

G'day all. First Qc and first rep. After spending a heap of time here I decided to go with the rich batgirl as my first rep. Chose steve as I've been impressed with the quality of other QC posts from him.

  1. Dealer name: theonewateches (steve)

  2. Factory name: rich

  3. Model name (& version number): GMT Master II Batgirl Jub JH3285 free sprung

  4. Price Paid: $750 shipped

  5. Album Links: https://mega.nz/folder/WFYDDDYJ#O9h0ULyhN5Tp8AFnvWCzpA

  6. Index alignment: Looks aligned for each hour. The triangle at 12 maybe slightly not centred? The 4, 5, 7 and 8 marker look a little messy? the black circle isnt perfect on them.

  7. Dial Printing: looks good

  8. Date Wheel alignment/printing: i think it looks good and printing is aligned

  9. Hand Alignment: Looks fine.

  10. Bezel: no issues

  11. Solid End Links (SELs): cant see any major gaps

  12. Timegrapher numbers: 0sd 282 degrees 0.0ms error

  13. Anything else you notice: Ive never had a jubilee bracelet, is it meant to be see through as seen in the images.


r/RepTimeQC • • 58m ago

New QC AFTER RL Steve.

Thumbnail
gallery
1 Upvotes

Dealer name: Steve – TheOneWatches
Factory name: AF
Model name (& version number): Cartier Tank Must Large, WSTA0041 (25.5 × 33.7 mm), Quartz
Price Paid: $228 USD
Album Links: dis not get album link this time but high resolution images in my email.
Index alignment: I don’t see any obvious misalignment or dial rotation, but I’d really appreciate a second opinion from more experienced eyes. This is my first rep ever, so I’m trying to make sure everything looks good before giving it the GL.
Dial Printing: This was probably my main concern. Last one has dial printing mistakes like specs, and stains. This one imo looks crisp, but. Set of pro eyes could help more.
Date Wheel alignment/printing: N/A
Hand Alignment: Nothing obviously wrong to my eyes.
Bezel: No obvious issues that I can spot.
Solid End Links (SELs): N/A
Timegrapher numbers: N/A – Quartz
Anything else you notice: The cabochon looks fine to me overall. I’ve noticed that newer Cartier Tanks seem to have a slightly pointier cabochon compared to the rounder ones on vintage models, so that doesn’t particularly bother me. I’m mostly concerned about the dial printing and whether there’s anything else I’m overlooking. Since this is my first rep, I’d really appreciate any feedback from people who are more familiar with AF Tanks. Just want to make sure I’m not missing any QC issues before approving it. Thanks in advance!


r/RepTimeQC • • 1h ago

First QC - A7F IWC Mark XX Blue S/S

Thumbnail
gallery
2 Upvotes

Finally pulled the trigger on an IWC with Steve (who has been great as expected).

My first effort at a QC so let me know if I'm missing something:

1. Dealer name: Theonewatches (Steve)

2. Factory name: A7F

3. Model name (& version number): IWC Pilot’s Watch Mark XX Blue Dial on Bracelet (IW328204)

4. Price Paid: $488 ($493 after 5% discount and shipping)

5. Album Links: Attached instead

6. Index alignment: Good — printed numerals and outer minute markers align cleanly, and the 12 triangle/dots sit straight and centered under the 12 marker.

7. Dial Printing: Crisp and level across "IWC", "MARK XX AUTOMATIC", and "SWISS MADE" with no bleeding. "SCHAFFHAUSEN" font looks a tiny bit thin (have read about this for A7F). Very small lint fiber near the 1 marker in the first photo is gone in the angled shot (outer crystal lint).

8. Date Wheel alignment/printing: Very slight upward bias on the 8 in the straight-on photo, though nothing is clipped and it looks more balanced at an angle (within acceptable tolerance).

9. Hand Alignment: Aligned and good lume fill. Date flips cleanly.

10. Bezel: Smooth polished bezel with no visible dings, scratches, or defects.

11. Solid End Links (SELs): Tight and flush all around. I thought the bottom right might have been slightly sunken but it looks fine on the edge on shot.

**12. Timegrapher numbers:**+3 to +5 s/d | 269° – 272° amplitude | 0.0 ms beat error (52.0° lift angle) — solid numbers.

13. Anything else you notice: Clasp brushing, IWC engraving, and inner deployant hinge join all look good for A7F, and the crown screws down smoothly in the video.

Thinking GL despite the tiny upward date bias, open to any second opinions.


r/RepTimeQC • • 1h ago

[QC] ARF DateJust 41 (126334) SS Blue Textured Dial

Post image
3 Upvotes
  • Dealer name: Andiot

  • Factory name: ARF

  • Model name (& version number): DateJust 41 126334, SS, Blue Textured Stick Dial, Jubilee Bracelet

  • Price Paid: ~$435 incl. shipping

  • Album Links: https://andiotwatches.x.yupoo.com/albums/263774435?uid=1

  • Index alignment: looks solid, as can be seen in the attached image

  • Dial Printing: Prints all look sharp and well aligned. No obvious mistakes or outliers. Logo at the bottom of the dial seems to be ever so slightly off center, but that's like fractions of a millimeter.

  • Date Wheel alignment/printing: Seems to be slightly off-center to the bottom, but that could just be the perspective of the close-up photo as it looks fine in the video (see album).

  • Hand Alignment: Looks good

  • Bezel: can't spot any obvious dents or scratches

  • Solid End Links (SELs): Seem to be alright

  • Timegrapher numbers: +1s/d - 266° amplitude - 0.1ms beat error

  • Anything else you notice: This is my first rep so I'm by no means an expert, but I think it looks fine overall?


r/RepTimeQC • • 5h ago

QC Santos De Cartier 40mm

Thumbnail
gallery
2 Upvotes

Hello all,

I'd appreciate some QC help. I'm thinking it's a GL but I'll let the more experienced people take a look. Thank you!

1. Dealer Name: TheOneWatches - Steve

2. Factory: BVF

3. Model: Cartier Santos 40mm, Stainless Steel, Blue Dial

4. Price Paid: $468 USD

5. Album Links: https://mega.nz/folder/iFIjnaCC#Pb7she9PuolnijGZH2_5dg

6. Index Alignment: Looks good. No noticeable alignment issues.

7. Dial Printing: Clean, sharp, and consistent. No visible flaws.

8. Date Wheel Alignment/Printing: Date looks centered and printing is clear.

9. Hand Alignment: Looks good.

10. Bezel: Clean finishing and consistent fit. No obvious issues.

11. Solid End Links (SELs): Bracelet looks like it fits flush. No noticeable gaps.

12. Timegrapher Numbers:

  • Rate: +6 s/d — Good

  • Amplitude: 266° — Good

  • Beat Error: 0.0 ms — Excellent

  • Lift Angle: 52.0°

  • Beat Rate: 28,800 BPH

13. Anything Else: Bracelet, clasp, case finishing, and crown all look good.


r/RepTimeQC • • 8h ago

Octa 26240

Thumbnail
gallery
3 Upvotes
  1. Dealer name: Phoenix

  2. Factory name: OCTA

  3. Model name (& version number): 26240 Green

  4. Price Paid: 565 USD

  5. Album Links: Uploaded directly to Reddit.

  6. Index alignment: Looks perfect from my POV, just the sticker blocking the 7 o clock baton but the angle looks good

  7. Dial Printing: Looks clear.

  8. Date Wheel alignment/printing: I think it looks alright

  9. Hand Alignment: Can't tell as the chrono seems to have been engaged at some point

  10. Bezel: Looks good

  11. Solid End Links (SELs): N/A

  12. Timegrapher numbers: -1s/d, 290 degrees, 0.0ms, 28800

  13. Anything else you notice: It looks perfect from my POV, it's just that recent days phoenix seems to have questionable things going on so I want a sanity check


r/RepTimeQC • • 10h ago

Daytona 116508 VSF weight gain

3 Upvotes
  • Dealer name: Andiot

  • Factory name: VSF

  • Model name (& version number): 1166508

  • Price Paid: $630

  • Album Links: https://andiotwatches.x.yupoo.com/103220215?uid=1

  • Index alignment: looks straight

  • Dial Printing: looks clear to me

  • Date Wheel alignment/printing:Looks aligned based on lines

  • Hand Alignment: looks centered for the most part

  • Bezel: outer bezel look misalligned

  • Solid End Links (SELs): straight forward dial

  • Timegrapher numbers: -2 s/d; Amplitude: 264-2; Acceptable Beat Error: 52 . He didn't have a picture of it, he has it part of a video where the result is at the end in the album

  • Anything else you notice: bezel looks scuffed is that normal? or is it over plastic? and the tachymeter , should i request it be redone? Any other indices looks ok? anything else I should look out for this model?

/preview/pre/xfxnk3zs3w2i1.jpeg?width=3840&format=pjpg&auto=webp&s=a7232a0147b079a455b8e7ec8705045551928a40

/preview/pre/mfni9s1c3w2i1.jpeg?width=3024&format=pjpg&auto=webp&s=cc3f1774f345e39fcec2d6a0c7c89dc9f58a7a17

/preview/pre/pni9m9vb3w2i1.jpeg?width=2521&format=pjpg&auto=webp&s=30605157d36d3445366c1506f26cd09e464082e3

/preview/pre/qbf27fia3w2i1.jpeg?width=4284&format=pjpg&auto=webp&s=63df1b91b821f54412037203789733c6eb8d14d2

/preview/pre/h6paji283w2i1.jpeg?width=4284&format=pjpg&auto=webp&s=3984fe7840f4afa6737d0acb839aaf6720774f87

/preview/pre/594gul283w2i1.jpeg?width=4284&format=pjpg&auto=webp&s=345fe13c6a50c6718bf2503014178ae3d459745c

/preview/pre/8jakbm283w2i1.jpeg?width=3024&format=pjpg&auto=webp&s=1dec6935425d9f7f26b9b827b2869859220ac5ce

/preview/pre/nu46bm283w2i1.jpeg?width=4284&format=pjpg&auto=webp&s=6c017e7018407041fdf8cc25889da933b8147632

/preview/pre/0gtf9s283w2i1.jpeg?width=3024&format=pjpg&auto=webp&s=a224c0f0bc3a86d84398f023ccff7b1c5e7e199b


r/RepTimeQC • • 11h ago

XF Tudor Pelagos second attempt.

Thumbnail
gallery
1 Upvotes
  1. Dealer name: Ficotime

  2. ⁠Factory name: XF

  3. ⁠Model name (& version number): Tudor Pelagos XF unsure of version

  4. ⁠Price Paid: $435 all in.

  5. ⁠Album Links: https://mega.nz/folder/r8RyVCCY#VlystyZipXsQM7yU54l6tw

  6. ⁠Index alignment: This one looks good. Maybe the 4 is slightly off, possibly the 1 but that’s nitpicking.

  7. ⁠Dial Printing: looks good, maybe thin.

  8. ⁠Date Wheel alignment/printing: looks centered to me.

  9. ⁠Hand Alignment: looks good

  10. ⁠Bezel: looks ok, slightly offset from side to side.

  11. ⁠Solid End Links (SELs): Looks good to me.

  12. ⁠Timegrapher numbers: Looks good, +6s/d is within reason.

  13. ⁠Anything else you notice: This one looks really go to me, but maybe I’m missing something. A second set of eyes would make me more comfortable.


r/RepTimeQC • • 12h ago

QC, Rolex Oyster Perpetual 36 126000, black dial (JTime)

Thumbnail
gallery
2 Upvotes

Picked up an OP36 from JTime, my fourth rep from them. Leaning GL but want extra eyes on index alignment and anything I missed.

  1. Dealer name: JTime

  2. Factory name: VSF

  3. Model name (& version number): Rolex Oyster Perpetual 36 126000, black dial [version if known]

  4. Price Paid: $498

  5. Album Links:

  6. Index alignment: Checked with the WatchQC ruler and a second independent overlay. All markers within ~1 degree; the worst readings (~1-1.5 degrees around 3/4/10) track the camera tilt in the photo rather than a real offset.

  7. Dial Printing: Crisp and even. Coronet centered at 12.

  8. Date Wheel alignment/printing: N/A (no-date model)

  9. Hand Alignment: Hands sit consistent across shots at ~10:08, but no hands-at-12:00 photo was provided, so hand alignment is not fully verified. Requested one from the dealer.

  10. Bezel: Smooth polished bezel, even all the way around.

  11. Solid End Links (SELs): Look flush with no visible gaps from the angles provided.

  12. Timegrapher numbers: 0 s/d, 286 amplitude, 0.0 ms beat error, 28,800 bph, one position (Weishi video in album).

  13. Anything else you notice: Clasp engravings clean and legible (ROLEX/GENEVA/SWISS MADE, STEELINOX, U7T date code, ROLEXSA oval). Caseback clean with the 36 sticker. Protective film still on, so the finish underneath can't be judged yet. No lume shot in the set. Order ref 000060637.


r/RepTimeQC • • 12h ago

ORF Seamaster 300M Bronze Gold Free Sprung

4 Upvotes
  1. Dealer name: Alternative Luxury (James)

  2. Factory name: ORF

  3. Model name (& version number): Seamaster Diver 300M Bronze Gold on Titanium Free Sprung

  4. Price Paid: $595

  5. Album Links: https://imgur.com/a/aKtSG9M

  6. Index alignment: New to all of this, so not sure what to look for, but should the minute markers on the bezel line up with the corresponding hour markers on the dial?

  7. Dial Printing: The Seamaster red printing looks dark to me but could be the lighting?

  8. Date Wheel alignment/printing: N/A

  9. Hand Alignment: Looks okay to me

  10. Bezel: Comparing to gen, looks like the numbers are filled in properly (not flush with surface)

  11. Solid End Links (SELs): N/A? This has a unique titanium mesh bracelet with a clasp system (feed)

  12. Timegrapher numbers: +8 sec/day, 295 amplitude, 0.2ms beat error

  13. Anything else you notice: Again, first rep purchase and first QC, so not sure what to look for. Only thing that caught my eye was the dark red print (Seamaster) and the alignment of the minute markers on the bezel not lining up with the markers on the dial.


r/RepTimeQC • • 12h ago

Omega Seamaster 300M Diver Titanium/Bronze Gold - ORF - *First Rep Purchase*

Thumbnail
gallery
10 Upvotes

My first rep, it's been an interesting experience! I chose this reference, showed it to my wife who also was into it (which was a nice surprise) and here we are.

Paid on Oct 26th, 2026.

14 days later, November 9th, Andiot themselves emailed and said the first watch they received didn't pass their internal QC - "REASON FAILED:AE183128 – Movement issue." Reassuring that they caught it and informed me.

11 days later, November 20th, received QC images for this unit.

  1. Dealer name: Andiot

  2. Factory name: ORF

  3. Model name (& version number): Seamaster 300M Diver Titanium/Bronze Gold ORF 1:1 Green Dial On Titanium Mesh Bracelet Asian Super Clone 8806(Free Rubber Strap)Free Sprung (210.90.42.20.10.001)

  4. Price Paid: $583 USD ($545 + $38 USPS shipping)

  5. Album Links: Uploaded directly to Reddit.

  6. Index alignment: 6 o'clock looks a little wonky. I'm in my mid-40s and my eyes are crap anyway, so I'm inclined to GL regardless.

  7. Dial Printing: Looks clear.

  8. Date Wheel alignment/printing: N/A

  9. Hand Alignment: Not a ton of pictures to help with this

  10. Bezel: Looks good

  11. Solid End Links (SELs): N/A

  12. Timegrapher numbers: +4 s/d ; 270° ; 0.3ms ; 52.0°

  13. Anything else you notice: The only other thing I spotted, and I feel silly for even mentioning it, was that the red 'OMEGA MASTER CO-AXIAL 8806' text on the rotor is wonky - it's not centered to the ring. Obviously not a big deal because I'm never really going to look at it.

As I said, I'm inclined to GL, but obviously would appreciate any other sets of eyes. Unfortunately most of the photos of the dial aren't really in focus - I sympathize as I'd imagine they've got lots of these QC's to do - would it be worth asking for any more in focus dial images? There are a couple of videos which I couldn't upload, winding the watch etc. I can upload elsewhere if they're deemed crucial.

Thanks in advance, excited to get an early Christmas present!


r/RepTimeQC • • 12h ago

VSF DJ Black 41 V2 Freesprung

Thumbnail
gallery
16 Upvotes

**Dealer:** Fico

  1. **Factory:** VSF

  2. **Model / Version:** DJ41 V2 Black

  3. **Amount Paid:** $494

  4. **QC Album:** https://mega.nz/folder/nxpwhKTZ#YCDkl_46WKjRW07xo5ismg

  5. **Dial / Marker Alignment:** Looks clean to me. Dont see anything noticeable.

  6. **Dial & Print Quality:** I am not a Rolex expert but it seems like rolex logo is more towards left side, and is not centered with 12.

  7. **Date Wheel:** Date seems properly centered and the printing looks clean.

  8. **Hands:** Hand positioning and alignment look good.

  9. **Bezel:** Looks acceptable overall, with no major issues that stand out.

  10. **SEL Fitment:** End links appear to sit nicely against the case with no obvious gaps.

  11. **Timegrapher:** \-6 sec/day, 252° amplitude, 0.0 ms beat error. Numbers look reasonable.

  12. **Overall Impression:** Everything looks okay apart from rolex logo on the dial which is left shifted (not tilted). But I am not sure if I'm right about that.


r/RepTimeQC • • 14h ago

BVF Large Cartier Santos Green Dial

Thumbnail
gallery
6 Upvotes

Dealer Name: Andiot
Factory name: BVF
• Model name (& version number): Cartier Santos Green Dial 40mm Automatic
• Price Paid: 441 USD
• Album Links: https://andiotwatches.x.yupoo.com/albums/263702773?uid=1
• Index alignment: N/A, after reading some other Santos forums, alignment doesn't apply to printed dials.
Dial Printing: Looks good to me, no obvious flaws.
Date Wheel alignment/printing: Can't tell if its off center or if the 1 is supposed to be that close to the left?
• Hand Alignment: Looks fine
• Bezel: Looks fine
• Solid End Links (SELs): N.A
• Timegrapher numbers: All numbers seem to be within range.

This is my second purchase ever, any help would be greatly appreciated! Thank you all


r/RepTimeQC • • 14h ago

QC VSF GMT Master II Batgirl

Thumbnail
gallery
10 Upvotes
  1. ⁠Dealer name: NecoClock (Jacky)

  2. ⁠Factory name: VSF

  3. ⁠Model name (& version number): GMT-Master II 126710 BLNR Black/Blue Ceramic 904L Steel VSF Best Edition on Jubilee Bracelet DD3285 V3

  4. ⁠Price Paid: $618 + $70 shipping - 2% discount = $674 USD

  5. ⁠Album Links: https://mega.nz/folder/LsBR2ZAa#KEqo_yf6ixcGZzIjg8ehoQ

  6. ⁠Index alignment: Looks aligned for each hour. The triangle at 12, and the 6 and 9, are perfect in my eyes.

  7. ⁠Dial Printing: I noticed the crown seems to have this small strand connecting to the top of the L in Rolex. You have to zoom in.

  8. ⁠Date Wheel alignment/printing: Does the 11 look like two capital I’s? Seems exaggerated.

  9. ⁠Hand Alignment: Looks fine.

  10. ⁠Bezel: Looks perfect.

  11. ⁠Solid End Links (SELs): Tight.

  12. ⁠Timegrapher numbers: +1s/d, 311 degrees, 0.0ms error

  13. ⁠Anything else you notice: I didn’t see the 3285 movement photos, and I’m requesting Jacky for it. I’ve also asked for a video on the crown positions, and how these move the hands at positions 1, 2 and 3.

Appreciate extra set of eyes and feedback from everyone. Thanks.


r/RepTimeQC • • 15h ago

VSF Rolex Oyster Perpetual 126000 36mm Black Dial (VS3230)

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: TheOneWatches

  2. ⁠Factory name: VSF

  3. ⁠Model name (& version number): Rolex Oyster Perpetual 36mm, Black Dial VS3239 

  4. ⁠Price Paid: $498 + $40 shipping ($538 total) 

  5. ⁠Album Links: https://www.theonewatches.ws/index.php?route=product/product&search=Oyster+perpetual+black+dial+VSF&product_id=16614&search=Oyster+perpetual+black+dial+VSF 

  6. ⁠Index alignment: Indices look straight overall. The 7 marker sits slightly to the left of its minute marker, but it is minor. 

  7. ⁠Dial Printing: Appears clean, crisp and centered. 

  8. ⁠Date Wheel alignment/printing: N/A – no date. 

  9. ⁠Hand Alignment: Hands look reasonably aligned by eye, but when I check with alignment tools, they don’t seem particularly good. Am I wrong, or is this because the watch isn’t perfectly straight in the photos? (Please find the photos attached. Apologies for the screenshots. I couldn’t figure out how to download the photos properly after using the alignment tool, so I feel like a boomer right now. Please bear with me)

  10. ⁠Bezel:

  11. ⁠Solid End Links (SELs): They seem reasonably tight. If anything, the top right one (red circle) might be slightly off, but I don’t see light through it. 

  12. ⁠Timegrapher numbers: Dial up, fully wound: rate -3 s/d, amplitude 278° at 59° lift angle (approx. 250-258° if normalized to 55°), beat error 0.1 ms, 28,800 bph. Video attached. 

  13. ⁠Anything else you notice: First time purchasing a watch. Any feedback is helpful! Would really appreciate a second opinion on the overall QC, especially any flaws or details I might have overlooked. Thanks in advance! 

This is my first QC (and most likely my only watch), so I’m excited, but also a bit cautious! 

I’ve been learning a lot from reading other people’s QC posts, but I still find it difficult to spot all the little details that the more experienced members seem to notice immediately.

So I’d be incredibly grateful if you could take a close look at this watch and help me identify anything that seems off, particularly anything that could be an obvious callout.

I’d really appreciate your help and patience with a first-timer. Thank you so much!

Best regards,


r/RepTimeQC • • 16h ago

VSF Oyster Perpetual 36mm Green Dial

Thumbnail
gallery
10 Upvotes

Hello guys, if I could ask for your opinion on this QC please, it’s my first one in a long time.
I think overall it looks good, 8 looks a little off but not sure if it’s enough for a RL?

Dealer name: Ficotime

Factory name: VSF

Model name (& version number): Oyster Perpetual 36mm Green
126000

Price Paid: $450

Album Links: https://mega.nz/folder/TpJlECAQ#CqL99QWOzLwmYOehkuAm7w

Index alignment: Everything looks good, 8 looks a little off

Dial Printing: Looks good

Date Wheel alignment/printing: N/A

Hand Alignment: Looks good

Bezel: Looks good

Solid End Links (SELs): I think it’s good?

Timegrapher numbers: +7s/d 302° 52%

If I could ask for your feedback on this on please will be appreciated 🙏


r/RepTimeQC • • 16h ago

JLC Reverso Tribute MGF A854A

Thumbnail
gallery
2 Upvotes

Dealer name: TheOneWatches
2. ⁠Factory name: MGF
3. ⁠Model name (& version number): JLC Reverso Tribute Small Seconds SS/LE Blue MGF A854A; Reference Q3988481
4. ⁠Price Paid: $408 USD
5. ⁠Album Links: photos are in the post
6. ⁠Index alignment: Both dials appear reasonably aligned. The 12, 3, and 9 o'clock markers look straight. No obviously crooked indices. The JLC logos appear centered. Slight perspective distortion prevents precise verification.
7. ⁠Dial Printing: Look generally crisp and straight. No obvious missing printing or severe defects.
8. ⁠Date Wheel alignment/printing: This watch has no date window. The silver dial has a 24-hour day/night indicator, which appears reasonably centered.
9. ⁠Hand Alignment: Main hands appear properly mounted and centered. Small-seconds and day/night hands look normal. No chronograph hands to assess. Exact hand-to-marker alignment cannot be tested from these static photos.
10. ⁠Bezel: No rotating bezel or pip. The polished case edges and horizontal Reverso grooves appear even. No obvious engraving or finishing defects.
11. ⁠Solid End Links (SELs): no SELs on this watch
12. ⁠Timegrapher numbers: all 3 fall in a good reading range
13. ⁠Anything else you notice: I noticed some red paint or markings on the back but other than that I'd GL


r/RepTimeQC • • 17h ago

QC Request - VSF 226627 Yacht-Master 42 Titanium

Thumbnail
gallery
11 Upvotes

Dealer name: Steve (Theonewatch)

  1. Factory name: VSF

  2. Model name (& version number): 226627 Yacht-Master 42 RLX Titanium

  3. Price Paid: $668

  4. Album Links: all images and videos attached

  5. Index alignment: All indexes look good to me, and DialCheck shows every marker green.

  6. Dial Printing: Text looks crisp and centred, no issues I can see.

  7. Date Wheel alignment/printing: 12, 13, 14 and 16 all sit centred in the window, digits level. Date flips at midnight and quick-set works in the video.

  8. Hand Alignment: Good

  9. Bezel: Triangle lines up with the 12 marker. Raised numerals look clean.

  10. Solid End Links (SELs): Look flush, no light showing through. Tape covers the lug corners in the caseback shot.

  11. Timegrapher numbers: 0 to -1 s/d, 267-269° amplitude, 0.1 ms beat error (dial up, lift angle 59°)

  12. Anything else you notice: Black mark on the case side and a small speck on the clasp cover, both look like they are on the protective film.

Everything looks fine to me visually, but I'd appreciate a second set of eyes in case I'm missing something. Thanks in advance!


r/RepTimeQC • • 17h ago

QC - VSF Seamaster 300 "No Time to Die" V7

Thumbnail
gallery
2 Upvotes

Would love to get some opinions on this, thanks for taking the time!

Dealer name: Andoit

Factory name: VSF

Model name (& version number): Seamaster 300 "No Time to Die" Limited Edition VSF NTTD 1:1 Best Edition on Titanium Mesh Bracelet SA8806 Super Clone V7

Price Paid: $430 + shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/263718042?uid=1

Index alignment: Looks ok to my untrained eye, only question would be are the buckteeth a bit off center to the left?

Dial Printing: Focus is not the best on the dial but looks ok.

Date Wheel alignment/printing: NA

Hand Alignment: Looks good from freezing the video

Bezel: Top marker slight off center to the right and the 9 o'clock marker is low.

Solid End Links (SELs): Nothing of note that I can see.

Timegrapher numbers: +4s/d, 269° amplitude, 0.3ms beat error

Anything else you notice: Hard to tell on the dial as the pictures are in perfect focus, also, in the lume picture the alignment looks worse than the regular pictures. Interested to hear what others think, thanks!


r/RepTimeQC • • 18h ago

[QC] BTF 116500 Reverse Panda

Thumbnail
gallery
2 Upvotes

This is my first watch and my first time QC so any and all help is appreciated.

Dealer Name: Theonewatches

Factory Name: BTF

Model Name: Rolex Daytona Reverse Panda 116500 DD4130

Album Links: Imgur

Index Alignment: hour markers look well aligned for the most part with some slight bias on the 9. Without the grid, and maybe its my ocd and autism, but it does look like the 9 sits ever so slightly lower when compared next to the 3 but would like to hear other opinions on this.

Dial Printing: Appears good and DAYTONA looks clear. I did not notice any bleeding

Date Wheel: Not applicable

Hand Alignment: The top left chronograph hand does appear slightly turned clockwise. Again, would like to hear opinions on this.

Bezel: Looks good, I did not notice anything

Solid End Links: To me, this would be RL because the bottom right corner, it looks like the lug is bending outwards, like a slim/narrow pyramid. Unless this is from the plastic wrap but on video and in some photos it looks like a noticeable gap to me.

Timegrapher Numbers: -3 s/d, 290°, 0.1ms 28800, 52.0° lift

Anything Else/Conclusion: First watch and first QC. The SEL is the most concerning and would appreciate any feedback on that and anything else I may have missed.


r/RepTimeQC • • 18h ago

First QC - Datejust 41mm Wimbledon

Thumbnail
gallery
4 Upvotes

Dealer name: TimeUltra
Factory name: VSF
Model name: VSF DJ 41mm 126334
Price Paid: USD 518 + shipping
Album Links: Photos attached
Index alignment: the 9 index might be a little tilted, but possibly within tolerance
Dial Printing: seems good
Date Wheel alignment/printing: seems good
Hand Alignment: seems good
Bezel: seems good
Solid End Links (SELS): small space between the case and bracelet. Not sure if it is expected
Timegrapher numbers: +5 s/d (seems good)
Anything else you notice: watch looks beautiful

Hello, this is my first rep and first QC!

The watch looks beautiful in the photos, but I know you guys have a trained eye and there might be a thing or two that I missed.

Thanks in advance!


r/RepTimeQC • • 19h ago

DayDate 40mm Ice Blue Dial Roman from RCF

Thumbnail
gallery
3 Upvotes
  1. ⁠Dealer name: Steve theonewatches

  2. ⁠Factory name: RCF

  3. ⁠Model name (& version number): Day Date 228236

  4. ⁠Price Paid:$858

  5. ⁠Album Links: https://mega.nz/folder/GMRhiLZL#n3Nhq_NmrNH-iixr0NhQAQ

  6. ⁠Index alignment: looks spot on to me

  7. ⁠Dial Printing:clean printing

  8. ⁠Date Wheel alignment/printing: my concern is the “2’s” in 20-29 will be set too far left. I asked for more pics( just asked so I’ll update later) Day wheel looks very well centered. The video in the album shows clean movement there too

  9. ⁠Hand Alignment:looks good

  10. ⁠Bezel: nice fluting even

  11. ⁠Solid End Links (SELs): no issues I see

  12. ⁠Timegrapher numbers: rate -2 s/d 280 amp error 0.1 ms

  13. ⁠Anything else you notice: funny little AU750 on the band clasp but I knew that going into this lol


r/RepTimeQC • • 19h ago

BVF Cartier Panthère Small 22mm – QC Help Needed

Thumbnail
gallery
6 Upvotes
  1. Dealer: TheOneWatches (Steve)

  2. Factory name: BVF

  3. Model name: Cartier Panthère de Cartier Small, Stainless Steel, White Dial (22mm × 30mm) — NOT Mini

  4. Price paid: $288 USD total ($238 watch + $50 shipping)

  5. Album links: QC photos attached; album link pending

  6. Index alignment: N/A — Printed Roman numerals

  7. Dial printing: I believe the entire dial may be rotated slightly counterclockwise relative to the case. It's particularly noticeable around the lower Roman numerals and SWISS MADE printing. I'm unsure whether this is actual dial rotation or camera perspective. Would appreciate additional opinions.

  8. Date Wheel alignment/printing: N/A

  9. Hand alignment: Blue hands appear fine from the photos.

  10. Bezel: Polished case and bezel appear clean, with no obvious major defects.

  11. Solid End Links (SELs): N/A

  12. Timegrapher numbers: N/A — Quartz movement

  13. Anything else you notice: This watch is for my wife. My primary concern is the possible counterclockwise dial rotation. I'd appreciate feedback on whether it's within acceptable tolerances or worth requesting another watch. I also want to confirm that this is the Small 22mm model, not the Mini.