r/RepTime • • 3m ago

General Question WTC | SPEEDMASTER ‘57 40.5 mm, steel on leather strap Burgundy

Post image
1 Upvotes

I cant find a single seller who has this, can anyone recommend a seller with this watch please?


r/RepTime • • 24m ago

No Legit Check (LC) allowed. Verify w/professional/online pics ISO

1 Upvotes

Looking for good reps but not looking to spend vsf money. Looking around $100-200USD


r/RepTime • • 1h ago

Wrist or Watch Pic Precisione del VSF 124060

Thumbnail
gallery
6 Upvotes

Buongiorno a tutti, ho comprato un 124060 da SEAD quasi un anno fa. L’ho fatto revisionare (lo faccio con tutte le Rep appena arrivano) Ed impermeabilizzare. Rimango impressionato ogni giorno dalla precisione del movimento, nemmeno i miei svizzeri gen forse mantengono questi scarti.


r/RepTime • • 2h ago

General Question Any leads with TD’s for a PPF 38.5mm Ladies Aquanaut?

Post image
0 Upvotes

I’ve asked a few TDs with no luck so far. They say it’s unavailable. Just looking for leads if anyone has purchased one recently so I can get an order in before Christmas.


r/RepTime • • 3h ago

Mods/ Work in Progress AF Santos gold plating, the saga continues.

Thumbnail
gallery
0 Upvotes

A few months ago I got a Santos from a TD and paid extra for gold plating. The before and after showed nothing was done to the watch. I published it here:

https://www.reddit.com/r/RepTime/s/MUyUZJzdKy

The TD agreed to replate it. I’m not sure if it looks as bad as I think, or I’m just jaded. Pretty sure the color isn’t any better.

Here are the photos from the second replating
Here are the photos from the first replating
And here are the original QC before replating

The TD also showed me the xray document (attached). I uploaded it to Claude which noticed 2 typos “reading” and “plating“ and suggested the document was just manually typed.

I’m a little exhausted by this. Should I just accept it? And if not, what do I tell the TD?

Any advice would be appreciated. Thanks!!


r/RepTime • • 3h ago

Mods/ Work in Progress Daytona swap

0 Upvotes

Anyone know if you can swap the end links and clasp from a Daytona bracelet onto the rubber oyster flex parts and they'll fit?


r/RepTime • • 3h ago

General Question Panerai Rep dealer?

1 Upvotes

Is there someone who specializes in Panerai clones?

I am looking for the PAM111 and it's been tough to locate.

Thank you.


r/RepTime • • 3h ago

General Question First Rep Watch Experience - Help!!

0 Upvotes

I’m hoping to buy the Cartier Baignoire Watch (bangle version) and was going to go with Hont, but I’ve read so many bad reviews. Can anyone suggest a decent rep seller? Happy to pay more as I want a decent rep, but at the moment not sure who to purchase from? Any other suggestions would be great, I’m based in Australia.


r/RepTime • • 4h ago

Vintage Dream Build: Late 80's NOS 1016 Explorer

Thumbnail
gallery
1 Upvotes

Just finished my first watch build and wanted to share some pictures and details on how it came together. I've included plenty of technical details for the fellow autists, and pictures for everyone else.

These forums were incredibly helpful throughout the process, so hopefully sharing what I learned can help someone else with their build.

Parts List

  • Case: Raffles

  • Caseback: Raffles 16200 (slimmer than 1016)

  • Bracelet: Raffles

  • Dial: Yuki Explorer 1016

  • Hands: Tudor Sub / Yuki (see notes)

  • Crown & Tube: Rolex 24-604 / 5330

  • Movement: ST2130 (ETA 2824 clone), converted to no-date

  • Crystal: Custom-modified T21

  • Bezel: WSO/EWP

  • Spring Bars: Seiko 1.8mm body / 1.1mm tips

  • Caseback Gasket: Rolex Datejust-spec (0.8mm vs. Raffles 0.6mm)

Build Details & Modifications

Inspiration: A late-serial 1016 with a service/Luminova dial, incorporating elements of the 14270. My ideal version of the 1016 rather than a strictly period-correct replica, with reliability and durability just as important as aesthetics.

Movement: Chose the 2824 over the NH38 primarily for its lower hand-stack height. With the rehaut and crystal lowered, the NH38 wouldn't have sufficient hand clearance.

I initially avoided a $300 Sellita for fear of damaging the keyless works, opting for the ST2130, which seems to have overtaken the PT5000 as the better affordable 2824 clone. Removed all dial-side date components and replaced the three-position setting lever with an ETA two-position lever to eliminate the ghost date. Movement arrived clean, runs well, and has given me no issues. That said, the keyless works weren't nearly as intimidating as expected—I'll probably use a Sellita next time.

Case & Lug Reshaping: The Raffles case was a solid starting point. I slimmed the upper lugs, squared their ends, and, most importantly, accentuated the rounded tonneau shape of the side profiles. It's a defining feature of the Explorer and early Datejust cases that I love, yet one that's often poorly reproduced on aftermarket cases and builds.

Another lesser-known detail, learned from a Rolex restorer on YouTube, was adding a subtle chamfer to the inner lug edges. Counterintuitive, but it made a surprisingly big difference in achieving a more gen-like appearance.

Finished by rebrushing the lugs with Garryflex and lapping the side profiles with 3M diamond films, creating a crisp transition between brushed and polished surfaces.

Drilled Lugs & Spring Bars: I love the look of 1.3mm drilled lugs with chunky 2.0mm spring bars and their 1.2mm tips. Unfortunately, this essentially limits you to 580 endlinks, which tend to protrude past the lugs. The 558 endlinks from the 14270/114270 fit much better but require 1.8mm spring bars, whose standard Rolex 0.9mm tips look anemic on a 1016.

After some searching, I sourced Seiko 1.8mm spring bars with oversized 1.1mm tips, allowing me to drill the lugs to 1.15mm. This achieves nearly the same chunky appearance without sacrificing compatibility with the better-fitting 558 endlinks.

Crystal: Originally planned on a T22 before discovering its significantly larger OD compared with the T21. Purchased several T21 variants, selected the lowest-profile version, and modified it further.

The crystal skirt initially sat approximately 0.10mm above the midcase, so I shaved 0.10mm off the rehaut to lower it. I then lightly reshaped the crystal for a seamless transition into the bezel.

Bezel: Wanted a 1016Lovers bezel, but being in the US, settled on the WSO/EWP. Two important observations:

  • Fitment: Arrives with a ~30.4mm ID, requiring enlargement to ~30.6mm for the T21. Target approximately 0.05mm interference between bezel ID and crystal OD for a proper press fit.

  • Finish: Despite being stainless steel, it's plated. Polishing revealed what appeared to be brass beneath the outer finish. Fortunately, that was another plated layer, which I polished through to expose the underlying stainless steel.

Hands: One of the biggest tells on 1016 builds, in my opinion. None of the commonly used aftermarket options accurately reproduce the original hour, minute, and seconds hands.

I purchased sets from Raffles, Yuki, and Startime, ultimately selecting Startime's hour/minute hands and Yuki's seconds hand as the best combination. Still not perfect. I plan to upgrade to MeisterWerksHQ, whose $95 ETA 2824-compatible hands are the most convincing I've found.

Crown & Tube: Chose the Rolex 24-604 and matching 5330 tube over the period-correct 24-600. The 604 is visually indistinguishable when screwed down but offers a more robust design and improved water sealing with the 5330 tube. Reliability was a priority, so this was an easy decision.

The 5330 tube threads directly into the Raffles case, but initially left a slight gap between crown and case. A 4.0mm flat countersink, approximately 0.1–0.2mm deep, corrected the fit, allowing the crown to sit flush.

Caseback: The Raffles midcase is thicker than a genuine 1016, particularly underneath where the caseback meets the case. A genuine Explorer has a subtle recess at this junction, whereas the Raffles and genuine 162XX cases have a protruding lip. I'd eventually like to mill that lip down, but for now, the slimmer Raffles 16200 caseback helps reduce the overall thickness.

The factory caseback threading was also terrible—rough engagement and difficult to start. I cleaned up the leading thread, applied diamond lapping compound, and repeatedly threaded the caseback in and out until the engagement smoothed out. It now starts easily and feels substantially better.

Important: Thoroughly remove ALL lapping compound afterward. Embedded diamond abrasive can continue wearing the threads if improperly cleaned.

Bracelet: The Raffles bracelet isn't bad, although I'll eventually upgrade to an Italian. The factory brushing is incorrect, and the polished ends are excessively sharp.

I lightly rounded/chamfered the bracelet ends, polished them, then refinished the links using Garryflex → 3M grey scuff pad → very light Dialux Green polish. Repeated the process on the endlinks. Much closer to the look I wanted.

Additional Details & Lessons Learned

  • Caseback gasket: Used a Rolex Datejust-spec gasket, 0.8mm versus the supplied 0.6mm. Fits properly and feels noticeably better quality.

  • Keyless works: The 2824 and its clones can be finicky, but they're manageable. Be gentle, lightly lubricate the stem before insertion, and never force it. If there's resistance, withdraw, reposition, and try again.

  • Finishing supplies: Polyamide tape, Dialux Grey, and 3M diamond lapping films were invaluable for polishing and finishing.

  • Stem sizing: Get digital calipers with 0.01mm resolution and a ruby stone. Eyeballing stem length was a mistake, and rounding the freshly cut end with a ruby stone helps prevent cross-threading.

  • Movement mounting tabs: The supplied tabs are too long. Shortening them by a few fractions of a millimeter and rounding their ends produces a much more secure fit.

  • Yuki dial: Extremely delicate, with feet that are too thick for the 2824. Their diameter must be reduced for the dial to seat properly. Work slowly and carefully.

  • Adhesives & seals: Less is more with GS Hypo Cement. Horotec Magic Gasket is also excellent.

  • Rodico: Buy the genuine Bergeon product. Cheap alternatives leave residue, and the last thing you want is to smudge your hands and have to clean and polish them again.

  • Lug drilling: Use a drill press, high RPM, and the best bits you can afford. Breaking a bit inside a lug is an avoidable nightmare.

  • Patience: If you're frustrated, rushing, or getting lazy, walk away. Better to take a break than damage a part you spent hours getting right.

Overall, I'm about 90% satisfied with the result. Learned a tremendous amount, thoroughly enjoyed the process, and already can't wait to build another.


r/RepTime • • 5h ago

Wrist or Watch Pic Got my first rep!

Thumbnail
gallery
32 Upvotes

I've always been curious about these superclone watches so I decided to get one. Waited about 2 weeks to get my first ever rep watch and it looks really close to my gen one (smooth bezel). If you put them side by side then you can definitely spot some small differences but overall, I'm really amazed with the quality of these watches!


r/RepTime • • 5h ago

General Question ?

0 Upvotes

Can a mod please message me and explain why my previous post was removed, thanks


r/RepTime • • 5h ago

Wrist or Watch Pic Tank mini

Post image
0 Upvotes

Hi yall! Does anyone if anyone is selling a Cartier tank mini size?
As below?
Thanks!


r/RepTime • • 6h ago

TD/Shipping Question TD not responding after receiving payment

0 Upvotes

I ordered a ZF Tudor BB54 through TheOneWatches, he was very responsive before receiving payment, as soon as he received payment he’s been ghosting me. I ordered it on nov 12 , he said 3-5 days for QC pics and shipping info, till today he has reposted to a single new message I sent him. Is this behavior normal/acceptable?


r/RepTime • • 6h ago

Wrist or Watch Pic Mega Franken Bruce Wayne ⚫️

Thumbnail
gallery
3 Upvotes

Hello all, just thought I’d post some more photos of my Mega Franken Bruce Wayne as some people wanted to see the watch in different lighting and angles.

The Franken was built with a genuine bezel, a genuine Jubilee bracelet, genuine date disc, genuine crown, genuine dial, genuine hands, genuine gaskets & genuine sapphire crystal.


r/RepTime • • 7h ago

General Question Contact willing to actually look for rarer reps?

0 Upvotes

Hi All.
I have eclectic tastes. My current Td’s don’t appear interested in tracking down specific models/factories for me.
Can anyone recommend a contact/agent that will actually look for a specific watch, even if the factory has discontinued it? Willing to pay for the service. Also willing to wait patiently if they are actually actively looking.
Thanks in advance
Matt


r/RepTime • • 8h ago

General Question Waiting on Andiot. And waiting…

2 Upvotes

What’s the longest anyone has had to wait on QC from Andiot? Currently on week 6 waiting for QC on an RGF DJ.


r/RepTime • • 8h ago

General Question Clean Platona - Oysterflex?

0 Upvotes

I've just picked up a Clean Platona and was thinking about putting an Oysterflex strap on it. Is this possible and any particular strap best suited?


r/RepTime • • 8h ago

Wrist or Watch Pic Cartier Santos 35mm Blue Dial BVF - Theonewatches (Steve)

Thumbnail
gallery
1 Upvotes

Just got this since my first one was a “shitter” 🤣 so hopefully this is a good step up of my first one


r/RepTime • • 8h ago

Discussion Is BPF a good mid range factory for Rolex?

0 Upvotes

I’m looking for a Rolex datejust or a Bruce Wayne… I understand they’re two very different watches but wanted to see if BPF is a good mid range factory for Rolex. Now I’m not expecting a superclone and appreciate there will be some flaws in that price range but wanted to see if they make certain models better than others before splashing around £250/$250. Looking forward to hearing your guys opinions and feel free to suggest any other factories you guys might prefer.


r/RepTime • • 8h ago

Shitpost Friday Haute whorologie. Sneak peek inside our totally 😉 legit factory

0 Upvotes

After 100 years of combined CNC mastery, traditional horological engineering and advanced hand-finishing philosophy, we are proud to present our latest interpretation of what a case should be.

Every surface begins its journey through a proprietary multi-axis precision milling process, followed by an extensive period of artisanal hand refinement performed by our master finishing specialist.

We do not simply remove material.

We communicate with it.

Each edge is individually observed under controlled lighting conditions before being carefully persuaded into alignment with the original design language. This allows us to achieve what we call Dynamic Edge Continuity™ — a proprietary finishing philosophy developed over generations of experience and absolutely not made up five minutes ago.

The case is machined to exact dimensions of the genuine reference, because dimensional accuracy is the foundation of horological authenticity.

But dimensions alone are never enough.

The final 0.02 mm is where craftsmanship begins.

Our finishing process combines traditional bench techniques with modern CNC methodology, creating a perfect dialogue between machine precision and human imperfection.

Every bevel is hand-refined. Every transition is visually calibrated. Every reflection is individually approved.

We don't chase perfection.

We chase the illusion of perfection.

This is not a replica. This is not a copy. This is a reinterpretation of an icon through our own manufacturing philosophy.

100 years of experience. 3 generations of master craftsmen. 1 CNC machine. Zero shortcuts.

Because when you have this level of craftsmanship, even the light knows where to land.

DISCLAIMER: THIS IS A SHITPOST AIMED AT SO CALLED SOLID GOLD WATCH MAKERS. Overlayed video of business card over someone else's video doesn't prove anything. I created this in few minutes with free APK. Don't contact me, I am not selling and I don't know anyone that sells watches. All of it comes from China.

If you can't personally go to factory, don't spend money you are not ready to lose.

If you still want to waste money on it. Remember that all value in solid gold rep comes from gold weight and gen parts. Anything above that is wasted money.


r/RepTime • • 8h ago

General Question How close can a moded vsf panda Daytona is to real one ?

0 Upvotes

r/RepTime • • 9h ago

Wrist or Watch Pic Left ZF right GEN Tudor Black Bay Chrono Flamingo Blue

Thumbnail
gallery
11 Upvotes

Left ZF [with stickers] right GEN Tudor Black Bay Chrono Flamingo Blue


r/RepTime • • 10h ago

Wrist or Watch Pic First Rep - DJ 36 smooth on Jubilee. Sold my gen

Thumbnail
gallery
49 Upvotes

Just received my first rep from GeekTime - a Datejust 36 with a smooth bezel and Jubilee bracelet from ARF (Pictures 1–4).

Pictures 5–7 is the gen of the exact same watch for comparison. I had sold this one a week prior to receiving the rep.

There are definitely some differences, particularly in the feel and finishing of the bracelet. But, on the wrist and to the untrained eye, the ARF looks really good. In my opinion at least.

Overall, I’m very happy with it. It’s a great alternative, and I can now put the money I have spent on the gen to much better use.


r/RepTime • • 10h ago

General Question Anyone happen to know if some td have Franck muller in stock?

0 Upvotes

I have been texting quite a few. But as you know the list is long. I feel like i have been trying to look everywhere?

I know its not a popular choice, but sure someone has a few?