r/NewedgeMustang • • 9h ago

Question Today I had the chance to check out an actual Cobra R!

Post image
13 Upvotes

r/NewedgeMustang • • 15h ago

Photo Just a heads up for anyone who wants the speedmaster aluminum intake

Post image
11 Upvotes

RTV the runners and runner cap. The paper gaskets that it came with all leaked. I was chasing a vacuum leak (yes I plugged the bolt hole under the throttle linkage) and my rpms surged when I applied starting fluid to the runners.

Genuinely a shame I had to do this job twice because a lack of QA.

(Yes my RTV paintwork isn't good, but it should seal, is what it is).


r/NewedgeMustang • • 15h ago

Photo Rules

Post image
8 Upvotes

Rules are Rules


r/NewedgeMustang • • 17h ago

Discussion How do you guys feel about the switch fire xpipe

Post image
0 Upvotes

Wondering if what everyone’s feeling is on it


r/NewedgeMustang • • 18h ago

Photo Picked up a 01 GT needing some love

Thumbnail
gallery
24 Upvotes

It’s been sitting for 2 years or more, under a tree. Crank no start, supposedly parked for knocking/noise. Hoping to bring it back without breaking the bank.


r/NewedgeMustang • • 19h ago

Question Fuel pump/pcm issues

1 Upvotes

Did a pull then the car shut off about a minute later, fuel pump wasn’t priming dropped the tank and replaced the pump. Nothing changed still doesn’t even prime, replaced the ccrm after that nothing changed, swapped the fpdm too odo reads ——— with the key on and theft light is blinking leading me to believe it’s pcm related. Any advice?

(Checked all related fuses prior to fuel pump replacement)


r/NewedgeMustang • • 19h ago

Photo Just put 95 mustang seats in my 01 what y’all think?

Post image
53 Upvotes

r/NewedgeMustang • • 19h ago

Video Can someone tell me if this a is a rod knock, posted a previous video of the night before and it sounds different. It shuts off after driving for a while. Starts up with no problem after it cools down

1 Upvotes

r/NewedgeMustang • • 22h ago

Question Shuts off after driving for a while. Starts up with no problem when it cools down

3 Upvotes

r/NewedgeMustang • • 1d ago

Photo My 04 Gt paid 6k

Post image
31 Upvotes

Sold her when I found my Cobra....was all orig.


r/NewedgeMustang • • 2d ago

Photo SVT in GTA VI

Thumbnail
gallery
605 Upvotes

r/NewedgeMustang • • 2d ago

Question Corbeau vs Sparco

Post image
5 Upvotes

So looking for a seat to replace my broken driver seat (either frame is cracked or the recline mechanism is broken) and I’m looking at aftermarket seats, as per the advice I got last time I asked this question I’m going with name brand seats but as there aren’t that many places near me where I can sit in a corbeau or sparco seat near me I need to rely on you guys😂. I am 5’10 38waist 235lbs I don’t race it most I do is spirited driving so looking for comfort more so than holding me in place. The seats I’ve been looking at the most recently are corbeau sport seats and sparco gt. The sparco seats I feel could’ve come stock in our cars which is a plus for me other seat options are welcome and pictures help too!

Before someone asks they’re Amazon seat covers


r/NewedgeMustang • • 2d ago

Photo Let’s see those Mustangs. 🔥

Post image
72 Upvotes

Taken at a Dunkin’ parking lot, fresh off a long tube headers install. 👌


r/NewedgeMustang • • 2d ago

Photo Sonic blue 🤤

Thumbnail
gallery
301 Upvotes

r/NewedgeMustang • • 3d ago

Video Exhaust clips (As Requested)

27 Upvotes

Pretty much the loudest set up you can get for these 2 valves. Camera doesn’t do it justice. You guys know. Hope you all enjoy

LAR Catless X pipe

Shorty Headers

Straight pipe (Muffler Delete)


r/NewedgeMustang • • 3d ago

Question Is it safe to jack SN95 from Team Z K-member

Thumbnail reddit.com
1 Upvotes

r/NewedgeMustang • • 3d ago

Photo Ambers are back, with swap harnesses!

Thumbnail
gallery
49 Upvotes

Not only that, but we are also offering brand new complete plug & play harnesses! We have our full installation video on the product page for more information.

https://lmr.com/products/94-04-Mustang-Taillights-3rd-Brake-Light


r/NewedgeMustang • • 3d ago

Video How does my New Edge sound?

7 Upvotes

r/NewedgeMustang • • 3d ago

Question New Dashboard

0 Upvotes

Hello, last minute I decided to go to the yard and inside an 03 V6 I found a mint black dashboard I had to be somewhere at noon, so I was running out of time to get it out. So some wire cutting came into place as well as caveman strength bc that sucker didn’t wanna come out.


r/NewedgeMustang • • 4d ago

Photo Finally Pulled Through

Thumbnail
gallery
23 Upvotes

2001 GT, traded for my Mercury Milan. 156k miles, and took it on a 5 hour drive home at night as my first manual driver. Thank you to everybody who guided me along the way! Will likely make it into a General Lee just because.


r/NewedgeMustang • • 4d ago

Question Supercharging a 04 v6

5 Upvotes

So I’m a college student and I had asked a guy I know and showed him my car I don’t have any good pictures of it on my phone but he had said that they made a supercharger adapter plate for the intake and was hoping someone here could help point me in the right direction for the plate and maybe a supercharger itself. More specifically it’s a 2004 3.8L V6 5 speed.


r/NewedgeMustang • • 4d ago

Discussion Solid upper AND lower rear control arms, bind issue?

Post image
4 Upvotes

2000 Mustang GT drag build, 8.8 rear. I'm planning to run solid upper and lower control arms in the rear. I can't remember where I saw it, but I read that you shouldn't run solid uppers because they'll bind.
I'm also adding a TRZ anti-roll bar. Does that change anything?
Anyone running solid uppers and lowers? Thoughts or opinions?


r/NewedgeMustang • • 4d ago

Video Humming sound that goes away when the engine restarts. mainly happens when the engine is cold, noise stops on its own eventually, and rpms stay steady when it hums. IAC Valve, pcv valve or hose possibly?

3 Upvotes

r/NewedgeMustang • • 4d ago

Question First build: turning my New Edge GT into an LQ4/turbo drag car. Looking for people to learn from

Thumbnail instagram.com
0 Upvotes

Hey everyone. I'm newer to Reddit, but about a year ago I set out to turn one of my favorite cars, a New Edge Mustang, into a full drag car that I'm building myself. I get help when I need it, but nobody's doing the work for me.
I've started an Instagram to document the progress, mostly so I can look back on it. Here's where I could use you:
I'm not chasing followers for the sake of followers. I'm looking for people I can lean on when I get stuck, and for ideas for the car. I'm very mechanically inclined, but this is my first build.
The combo is pretty basic: LQ4 6.0 and a 78/75 turbo. For a first build, I figured that was a solid place to start.
I'll be around Reddit and Instagram. Drop me a follow or a message and I'll follow back, especially if you're building something cool.
Thanks, all. I appreciate any help and advice from the community!