r/NewedgeMustang • u/Carnation_Ivaria • 17h ago
r/NewedgeMustang • u/TylerRodriquez • Sep 10 '26
Photo LMR (Late Model Restoration) AMA - Ask Me Anything
Good Morning everyone!
My name is Tyler Rodriquez, one of the marketing managers here at LMR.
This is your chance to ask me anything about new parts, current parts, project cars, what its like working here, etc. Look forward to hearing from you all!
r/NewedgeMustang • u/AntonioMrk7 • Dec 17 '23
Meta Join the SN95 Official Discord!
r/NewedgeMustang • u/AmbitiousOperation92 • 1d ago
Photo Just put 95 mustang seats in my 01 what y’all think?
r/NewedgeMustang • u/No_Round_9171 • 1d ago
Photo Picked up a 01 GT needing some love
It’s been sitting for 2 years or more, under a tree. Crank no start, supposedly parked for knocking/noise. Hoping to bring it back without breaking the bank.
r/NewedgeMustang • u/Azal_of_Forossa • 22h ago
Photo Just a heads up for anyone who wants the speedmaster aluminum intake
RTV the runners and runner cap. The paper gaskets that it came with all leaked. I was chasing a vacuum leak (yes I plugged the bolt hole under the throttle linkage) and my rpms surged when I applied starting fluid to the runners.
Genuinely a shame I had to do this job twice because a lack of QA.
(Yes my RTV paintwork isn't good, but it should seal, is what it is).
r/NewedgeMustang • u/Wrong_Juggernaut8329 • 1d ago
Discussion How do you guys feel about the switch fire xpipe
Wondering if what everyone’s feeling is on it
r/NewedgeMustang • u/catsasstrophie • 1d ago
Photo My 04 Gt paid 6k
Sold her when I found my Cobra....was all orig.
r/NewedgeMustang • u/Empty_Sorbet_6401 • 1d ago
Question Shuts off after driving for a while. Starts up with no problem when it cools down
r/NewedgeMustang • u/Timely_Celery_3472 • 1d ago
Question Fuel pump/pcm issues
Did a pull then the car shut off about a minute later, fuel pump wasn’t priming dropped the tank and replaced the pump. Nothing changed still doesn’t even prime, replaced the ccrm after that nothing changed, swapped the fpdm too odo reads ——— with the key on and theft light is blinking leading me to believe it’s pcm related. Any advice?
(Checked all related fuses prior to fuel pump replacement)
r/NewedgeMustang • u/Empty_Sorbet_6401 • 1d ago
Video Can someone tell me if this a is a rod knock, posted a previous video of the night before and it sounds different. It shuts off after driving for a while. Starts up with no problem after it cools down
r/NewedgeMustang • u/andy_337 • 3d ago
Photo Let’s see those Mustangs. 🔥
Taken at a Dunkin’ parking lot, fresh off a long tube headers install. 👌
r/NewedgeMustang • u/Rustang0 • 2d ago
Question Corbeau vs Sparco
So looking for a seat to replace my broken driver seat (either frame is cracked or the recline mechanism is broken) and I’m looking at aftermarket seats, as per the advice I got last time I asked this question I’m going with name brand seats but as there aren’t that many places near me where I can sit in a corbeau or sparco seat near me I need to rely on you guys😂. I am 5’10 38waist 235lbs I don’t race it most I do is spirited driving so looking for comfort more so than holding me in place. The seats I’ve been looking at the most recently are corbeau sport seats and sparco gt. The sparco seats I feel could’ve come stock in our cars which is a plus for me other seat options are welcome and pictures help too!
Before someone asks they’re Amazon seat covers
r/NewedgeMustang • u/Opening_Mastodon_680 • 3d ago
Video Exhaust clips (As Requested)
Pretty much the loudest set up you can get for these 2 valves. Camera doesn’t do it justice. You guys know. Hope you all enjoy
LAR Catless X pipe
Shorty Headers
Straight pipe (Muffler Delete)
r/NewedgeMustang • u/TylerRodriquez • 4d ago
Photo Ambers are back, with swap harnesses!
Not only that, but we are also offering brand new complete plug & play harnesses! We have our full installation video on the product page for more information.
https://lmr.com/products/94-04-Mustang-Taillights-3rd-Brake-Light
r/NewedgeMustang • u/Solid-Quarter-7913 • 3d ago
Question Is it safe to jack SN95 from Team Z K-member
reddit.comr/NewedgeMustang • u/Intrepid-Ad-513 • 4d ago
Photo Finally Pulled Through
2001 GT, traded for my Mercury Milan. 156k miles, and took it on a 5 hour drive home at night as my first manual driver. Thank you to everybody who guided me along the way! Will likely make it into a General Lee just because.
r/NewedgeMustang • u/CuteCriticism9146 • 4d ago
Question New Dashboard
Hello, last minute I decided to go to the yard and inside an 03 V6 I found a mint black dashboard I had to be somewhere at noon, so I was running out of time to get it out. So some wire cutting came into place as well as caveman strength bc that sucker didn’t wanna come out.
r/NewedgeMustang • u/Chuck123e7 • 4d ago
Question Supercharging a 04 v6
So I’m a college student and I had asked a guy I know and showed him my car I don’t have any good pictures of it on my phone but he had said that they made a supercharger adapter plate for the intake and was hoping someone here could help point me in the right direction for the plate and maybe a supercharger itself. More specifically it’s a 2004 3.8L V6 5 speed.
r/NewedgeMustang • u/ChrisKipper • 5d ago
Discussion Solid upper AND lower rear control arms, bind issue?
2000 Mustang GT drag build, 8.8 rear. I'm planning to run solid upper and lower control arms in the rear. I can't remember where I saw it, but I read that you shouldn't run solid uppers because they'll bind.
I'm also adding a TRZ anti-roll bar. Does that change anything?
Anyone running solid uppers and lowers? Thoughts or opinions?