r/MechanicsAnonymous • • Jul 09 '22

Are their any vehicle mechanics who like to invent?

0 Upvotes

I have a problem that is kinda bullshit and I need help. I want to create a system that can be added into the computer of a vic to prevent car jacking similar to a kill switch but created with vengeance, hate, and possibly revenge in mind. If you think you can help I would really appreciate it. Thank you for your time.


r/MechanicsAnonymous • • Jun 23 '20

Sooo wanna know how I blew up a motor on a Corvette

1 Upvotes

Ok early on in my years I was a tle at Walmart. There was the first indication. Who brings there car to Walmart for an oil change. Anyways the dude asked for zero weight 40 synthetic I advised him not to because you know it might burn up and what not but you went ahead and told me I don't know anything about cars and put it in anyways. So against my better judgment I put the oil in started up no leaks filter tight sent it on its way about 20 minutes later we get an angry phone call saying that the car's engine blew up. They went over the paperwork and found that I wasn't at fault because I put in the notes customer request 0w-40 oil. And that's how I blew up a Corvette motor


r/MechanicsAnonymous • • Jun 17 '22

help

2 Upvotes

I have a vw Jetta 1.9 tdi diesel 2009 that miss fires when the engine gets warmer (90°) i went to a mechanic and told the injector seals ar damaged and i should pay 400 euros each to replace just the seals or 500 euros to replace the injectors. And i felt like hi is repping me off if anyone knows if what he said is true or could give me any advice or help i would be thankful


r/MechanicsAnonymous • • Jun 22 '22

Nichirin automotive hit by ransomware supply chain attack

1 Upvotes

r/MechanicsAnonymous • • Aug 19 '19

Bolt-swap-oily-oops

2 Upvotes

Early in my career I swapped two of the different-length bolts while replacing an ac compressor on a 3.0l v6 Toyota Avalon. It’s still on the road (I know the guy) but the owner has no idea there’s a dime-sized hole in an oil passage in the block held sealed by JB-Weld. 50k+ miles since.

ALWAYS KEEP HARDWARE ORGANIZED


r/MechanicsAnonymous • • Jan 01 '18

Hi, I'm Ellenor, and I currently have a Hyundai Accent with two cylinder low compression. I have put extremely thick (15+W/30+) oil in it.

2 Upvotes

That's the substance of my confession.


r/MechanicsAnonymous • • Jul 14 '23

Jeep Liberty 2006 gas pedal stopped working while driving

Thumbnail self.jeepliberty
1 Upvotes

r/MechanicsAnonymous • • Jul 26 '23

New bc axle making noise

Thumbnail
m.facebook.com
1 Upvotes

Brand new cv axle anyone know why it clicks only 1 time whe I go from drive to reverse reverse to drive park to drive and park to reverse? Doesn’t make the noise while driving or shifting up or down (2019 Toyota Camry se)


r/MechanicsAnonymous • • Aug 08 '19

I went to go see a 2008 Honda Accord EXL and when it didn’t start the guy at the Toyota dealership said it was because it hadn’t been moved in 3 months, does the car sitting in one spot for a long time play a part in it not turning on or is the guy just trying to cheat me?

2 Upvotes

r/MechanicsAnonymous • • Oct 14 '17

Need advice

2 Upvotes

Hey guys, first time on here. I recently bought a VW golf Estate GT edition 2.0 (5 days ago) Had all the oil, filters and liquids changed and a new thermostat put in. But the past two days when I start to slow down when coming to a roundabout or junction or even just to park the Rpm drops to zero and the engine cuts off. Also if I'm driving quite fast and as soon as I take my foot of the gas pedal the Rpm drops to zero and the engine cuts off. The car was bought from an elderly gentleman who has told me that the car hasn't been driven in 8 months. There is still quite a lot of black soot/smoke/liquid coming out of the exhaust pipe. Also occasionally if the car is sitting in neutral the head lights will flicker then the Rpm will drop to zero and the engine cuts off. I am going to my mechanic on Monday morning as I'm not overly sure what it could be causing this. Maybe the throttle body needs cleaned or replaced or the fuel injectors need cleaned or replaced. Anybody with any ideas/help/advice on this?


r/MechanicsAnonymous • • Sep 08 '21

Anyone know what this could be??

2 Upvotes

r/MechanicsAnonymous • • Sep 13 '21

Former Techs / Service Managers Of Reddit - Where Did You Move Onto After Your Automotive Career?

2 Upvotes

I'm turning 30 next month, have been working in the industry since I was 15 starting as a gopher, then tire tech, alignment tech, B tech, service advisor, and service department manager today but I'm growing more and more dejected with both the quality of employers in my home state (CA) and the customer service end of the industry.

My question for those of you who've moved on is this - where did you move onto after your automotive stint? Has the industry knowledge you've gained helped you in your new field in any way?


r/MechanicsAnonymous • • Jun 23 '24

Ford Focus 1.6 TDCi 2013

1 Upvotes

Ford focus TDCi 2013

Hi was wondering if anyone could help, I drove about 15 miles yesterday and left my car for no more than 10 minutes. When I returned my car wouldn’t start at all, not turning over or clicking when turning the key, tried jump cables and a jump box as well as roll starting.. the radio and dash are completely blank but the electric windows wipers and lights will work. Does anyone have any ideas?


r/MechanicsAnonymous • • Jun 07 '24

Shutting down

2 Upvotes

My 2004 kia optima shuts down after 30-40 minutes of running plz help I can't afford to pay 150 to find out what's wrong with it thank you


r/MechanicsAnonymous • • Jun 21 '24

Volkswagon Passat 2016 RLine

1 Upvotes

I’ve had the car for about 2-3 years now from CarMax, never again will I buy a car from CarMax in my life. To get to the point. The engine burns oil pretty quickly, I’ve personally checked for external leaks but doesn’t look like that’s the problem. Another problem my A/C and Heater haven’t been working on the drivers side for over a year now, the passenger side works okay, it’s not strong but it works enough for the passenger to feel the cold or hot air. The other day I bought A/C refrigerant but the refrigerant shows there is enough in there.

I know I need to take it to an actual mechanic but any suggestions or possibilities the diagnosis may be and possible price range on fixing the issues?

Thanks in advance.


r/MechanicsAnonymous • • Jun 04 '24

Vehicle issues

1 Upvotes

I went to start my truck and it took three times for it to turn on and turn over, almost like having to switch on the battery or something can anyone tell me what that might be


r/MechanicsAnonymous • • May 30 '24

Advice On How to Proceed After, IMO, A Botched Job.

3 Upvotes

So, my wife calls to tell me her'13 Ford Escape 2.0 t was smoking badly when she got to work. Embarrassingly so. I had a T-Bird Turbo Couple that did the same thing. I figured the turbo had let go and was dumping oil. I called a shop that I had been dealing with for years and they sent out a wrecker. Their diagnosis was a bad turbo. I said go ahead and fix it and had some exhaust work done while it was there. About a week later, they called to tell me the new turbo had issues and asked me to give them some more time with it, No problem. I just wanted it done right. A day later it was "done".

When I went to pick it up they said it runs a little rough and might need a tune up. I replaced the coil packs and plugs and found a couple items that were not re-attached. The symptoms persisted. My wife drove it for a few weeks until she told me it was nearly undriveable. I told the shop what was going on and they sent a wrecker. Another week later the diagnosis was cylinder 4 had very low compression and the motor was shot.

So here's the deal. I'm not upset that the motor’s shot. I mean, I am but I don't think I can blame them for that. I do blame them for replacing a turbo and doing exhaust work on an unviable motor in the first place. The motor has never been overheated so I can't imagine that severe a loss of compression would occur in just a few weeks.

Am I off base on this? Do I have any options for trying to get compensation?


r/MechanicsAnonymous • • Jun 21 '24

flashing CEL

1 Upvotes

have a 17 GMC sierra 90k miles 5.3 . Had a flashing CEL one day, took it to a mechanic & said my injectors were dirty, took it to another one of told me to change my spark plugs & wires so i did, flashing CEL came back around 150 miles, decided to take it to the dealer, told me i had no symptoms of nothing failing expect injectors, went ahead & did a fuel injector test, said all 8 of my injectors were bad. price was 2500$ just for labor, went ahead & bought parts & took it to another mechanic. they did compression test & went ahead & replaced my injectors, gaskets etc. even did a compression test. everything came back good, cylinders, lifters all good. after all that, drove about 100 miles & flashing CEL comes on. took it in again & did some reving, came back & told me my coils were bad, they were dirty & had some rust to them. can this truly be the problem ?? why didn’t it scan for coils at first. or why didn’t it show up on any mechanics scanner at all. feel at this point every mechanic is saying something different & just making me throw money away.


r/MechanicsAnonymous • • Jan 03 '23

(CAR HELP) Dead battery or bad starter? (2010 Impala)

1 Upvotes

r/MechanicsAnonymous • • Jan 22 '23

I mixed concentrate floor cleaner in a coolant bottle like 3 years ago. told myself I'd remember I did. didnt.

Thumbnail
gallery
2 Upvotes

r/MechanicsAnonymous • • Sep 10 '22

I have a Nissan Pathfinder 03. She has a bad frame, held up by chains and bolts. I need to make it the next town over, it’s a 30-40 mins ride. Would she make it, if I’m easy on her?

2 Upvotes

r/MechanicsAnonymous • • Jun 14 '18

87 Mazda 323 S.O.S

2 Upvotes

Just joined this subreddit in order to get some advice on replacing the fuel system in my Mazda 323. Initially it was just a bad fuel pump but when I went to go replace I discovered that the entire fuel sending unit was damaged in the fuel tank. Of course Mazda doesn't manufacture any parts that could replace it so I was wondering if I should just go ahead and redo the entire fuel system. Injectors and all, any input would help


r/MechanicsAnonymous • • Feb 25 '22

Hi would appreciate if somebody could help need the name of part no1 on diagram so I can buy it to replace for a pegout partner 2006 1.6 hdi it neither comes with the driveshaft housing or the odometer sensor so I'm stuck I've been looking for two days now not a mechanic and it's really stressing me

Post image
1 Upvotes

r/MechanicsAnonymous • • Jan 22 '22

New car owner help with costly quote!

1 Upvotes

I have a 2008 Nissan Rogue I got used at 120,000 Miles. It was kept in amazing condition except for the tire pressure. This is the first car I have ever owned, and so I took it to a mechanic to get the fluids checked and the tires refilled. I also asked for new brake pads. The mechanic quoted me $300 at first, but then called saying I needed new rotars. So I agreed and got the front ones replaced along with the brake pads. I paid 1,000 for all this in the end. When I picked it up, it sounded like the engine was slaughtering something, and produced a horrific metal on metal scrapping sound. The driving was stalled and produced an odd jittering. I took it back, and the mechanic said I needed the whole CV Axis replaced and quoted me another 1,000. I didn’t have this jittering before and my driving was never previously stalled. I got a bad feeling. Does this sound legit, or is This guy trying to screw me over?


r/MechanicsAnonymous • • Jul 16 '20

Quiz Time: Ready for Brain Activity?

1 Upvotes

Do You Know?

Then Give your answer in the comment.