r/MechanicsAnonymous • • Mar 26 '15

Lets get this show on the road ...

9 Upvotes

Hi, I'm /u/NotSoGreatGonzo, and I once turned a “just gonna change a lightbulb or three” kind of situation into a two day “do I really have to take apart the gearbox?” clusterfuck.
I was young and dumb, and had a VW Golf mk1. The illumination on the instrument panel was pretty much non-existent, so I decided to change out the broken bulbs.
According to the workshop manual I should just unscrew a few screws, and then rotate the instrument cluster towards me. I did so, and it was stuck. Hmmmm. Let's see what happens if I pull a little harder?
“Snap! Crackle! Pop!” happened. I broke the end of the speedometer wire, and damaged the flexible printed circuit on the back of the instrument cluster.
Lots of swearing ensued.
When I removed the old speedometer wire, the small cogwheel at the end of it fell off the wire, and fell straight into the hole in the gearbox I just pulled it from.
So far, I had damaged a circuit board, broken a speedometer wire, and dropped a foreign object in the gearbox. Time to call it a day.

The next day, I got a new speedometer wire and found out that the cogwheel I dropped into the gearbox was made of soft, crushable plastic and therefore not likely to damage the gear box. It took me another hour to fix the circuit board, since I had to trace the broken connections and solder wires to replace them.

Oh, and I changed the damn light bulbs in thirty seconds.


r/MechanicsAnonymous • • Mar 26 '15

My name is CaptainLeadfoot and I once ruined a Scirocco engine with a power drill...

8 Upvotes

So I was young, stupid, and had just rounded the 12pt star type head bolts off with a 6pt star bit. Obviously the clever thing to do at this point was drill the head bolt out. Without blocking any of the oil galleries off. And on that day, I snapped a camshaft. I have learned a lot since then. Including the fact that some engines die not with a bang and a clatter, but a small squeak.


r/MechanicsAnonymous • • Mar 26 '15

My name is Thor_Away__ and I ruined a 300+ piece ejector pin set on a plastic injection mold.

5 Upvotes

I was done with replacing one of over 300 ejector pins on a plastic injection mold. When I put everything back together I messed up the alignment of 2 plates, eased down the ejector plates when there was a small jam, one light hammer tap later I broke what took me a week to make in the fraction of a second.


r/MechanicsAnonymous • • Jun 17 '23

Help with 2016 Toyota Yaris Noise

4 Upvotes

Already tried disconnecting alternator and noise does not go away. Serpentine belt was replaced a few thousand miles ago so not that. When I accelerate the car it gets worse , any clues or advice?


r/MechanicsAnonymous • • Sep 15 '19

New lock button on snap on ratchet

Post image
4 Upvotes

r/MechanicsAnonymous • • May 30 '24

Advice On How to Proceed After, IMO, A Botched Job.

3 Upvotes

So, my wife calls to tell me her'13 Ford Escape 2.0 t was smoking badly when she got to work. Embarrassingly so. I had a T-Bird Turbo Couple that did the same thing. I figured the turbo had let go and was dumping oil. I called a shop that I had been dealing with for years and they sent out a wrecker. Their diagnosis was a bad turbo. I said go ahead and fix it and had some exhaust work done while it was there. About a week later, they called to tell me the new turbo had issues and asked me to give them some more time with it, No problem. I just wanted it done right. A day later it was "done".

When I went to pick it up they said it runs a little rough and might need a tune up. I replaced the coil packs and plugs and found a couple items that were not re-attached. The symptoms persisted. My wife drove it for a few weeks until she told me it was nearly undriveable. I told the shop what was going on and they sent a wrecker. Another week later the diagnosis was cylinder 4 had very low compression and the motor was shot.

So here's the deal. I'm not upset that the motor’s shot. I mean, I am but I don't think I can blame them for that. I do blame them for replacing a turbo and doing exhaust work on an unviable motor in the first place. The motor has never been overheated so I can't imagine that severe a loss of compression would occur in just a few weeks.

Am I off base on this? Do I have any options for trying to get compensation?


r/MechanicsAnonymous • • Apr 16 '19

How I grenaded 2 Eaton trans and didn’t loose my job

3 Upvotes

I’m a diesel tech early in my career I was doing a simple clutch job on a kenworth finished it up and came back a week later with a (no shift ) problem. So I pulled the Bruce Jenner and pulled it apart and the inside was fragged. The fucker drives like a bat out off hell and lugs the poor piece of shit up a mountain every day so assumed it just gave up the ghost ( over a million miles on trans ). Get a new trans in the truck send him on his way and low and behold it gets dropped off at the shop a month later so I pulled the trans and SAME FUCKING THING so I’m loosing my shit go back and look at the clutch on lunch break when no one is around, drop the clutch and that’s when I see it The fucking pilot bearing has been pushed out of the flywheel(. Long story short when I put the trans in the first time I was at an angle and clipped the bearing and pushed it out ) fearing I would lose my job I fixed the problem put the clutch back in spun some story about how the trans they sent were shit .boss believe me and we got another “3rd time the charm” put it back together and the fuckers been on the road ever since. Kind of feel like an asshole to this day about it but everything when better than expected.


r/MechanicsAnonymous • • Jan 30 '19

My uncle started a podcast with his friend about their experiences working on cars in an automall qnd its not total shit

Thumbnail
google.com
3 Upvotes

r/MechanicsAnonymous • • Jun 07 '24

Shutting down

2 Upvotes

My 2004 kia optima shuts down after 30-40 minutes of running plz help I can't afford to pay 150 to find out what's wrong with it thank you


r/MechanicsAnonymous • • Dec 25 '23

Roanoke VA

Post image
2 Upvotes

r/MechanicsAnonymous • • Jan 22 '23

I mixed concentrate floor cleaner in a coolant bottle like 3 years ago. told myself I'd remember I did. didnt.

Thumbnail
gallery
2 Upvotes

r/MechanicsAnonymous • • Nov 29 '22

Weird Shaking and rumbling when parking Toyota Yaris, can anyone identify the cause?

2 Upvotes

Hi, I've never posted on here before and I don't drive or know anything about cars.

My Girlfriend drives an automatic Toyota Yaris and when she is slowing down and turning into a parking space the car starts shaking and rumbling.

I captured it on video as best I can. Its a longshot, but I am hoping someone on here can tell me exactly what she is doing wrong or if there is a problem with the car.


r/MechanicsAnonymous • • Sep 10 '22

I have a Nissan Pathfinder 03. She has a bad frame, held up by chains and bolts. I need to make it the next town over, it’s a 30-40 mins ride. Would she make it, if I’m easy on her?

2 Upvotes

r/MechanicsAnonymous • • Jun 17 '22

help

2 Upvotes

I have a vw Jetta 1.9 tdi diesel 2009 that miss fires when the engine gets warmer (90°) i went to a mechanic and told the injector seals ar damaged and i should pay 400 euros each to replace just the seals or 500 euros to replace the injectors. And i felt like hi is repping me off if anyone knows if what he said is true or could give me any advice or help i would be thankful


r/MechanicsAnonymous • • Sep 13 '21

Former Techs / Service Managers Of Reddit - Where Did You Move Onto After Your Automotive Career?

2 Upvotes

I'm turning 30 next month, have been working in the industry since I was 15 starting as a gopher, then tire tech, alignment tech, B tech, service advisor, and service department manager today but I'm growing more and more dejected with both the quality of employers in my home state (CA) and the customer service end of the industry.

My question for those of you who've moved on is this - where did you move onto after your automotive stint? Has the industry knowledge you've gained helped you in your new field in any way?


r/MechanicsAnonymous • • Sep 08 '21

Anyone know what this could be??

2 Upvotes

r/MechanicsAnonymous • • Apr 10 '20

92 Honda Accord

2 Upvotes

I have a 92 Accord with a starter that recently messed up. I screwed up to begin with because I disconnected the distributor and let it sit for about a week with the battery still connected. I just went to buy a new starter today and when I went to remove the old starter I realized that the battery was still connected so I disconnected it. When I put everything back together I went to jump the battery because it was dead to begin with and when I did the jumper cables caught fire. I disconnected them immediately and removed the negative terminal from the battery and let it sit for like 10 min. I tried one last time and the car was so close to starting but it just wouldn’t and I had to stop because I had already broke the first pair of cables. I’m not sure what I need to do but I made sure everything was connected the exact same way I took them off. And the car still won’t start.


r/MechanicsAnonymous • • Sep 26 '19

Car issue

2 Upvotes

Is it normal to have oil wetness around the outside of oil cap


r/MechanicsAnonymous • • Sep 15 '19

Hard Beads in Sump After Oil Change, What Were They?

2 Upvotes

I changed the oil on my 08 FJ Cruiser yesterday. After putting the old oil in a safe container, I saw three small black beads (1-3mm in diameter) left in the sump. I picked each one up and rubbed it between my fingers and they mostly crumbled, I just assumed they were heavy carbon deposits. However, at their core, we’re some very small metal shavings, almost the color of brass but a little lighter. Anyway, the vehicle has been running fine, no knocking, ticking, or anything like that. I’m just confused because I have no idea where they could have come from, I don’t think the bearings are falling apart, couldn’t imagine it would be from the rings, I just don’t know. If anyone has any idea or has seen this before please tell me what’s happing to my internals, thanks y’all!


r/MechanicsAnonymous • • Aug 19 '19

Bolt-swap-oily-oops

2 Upvotes

Early in my career I swapped two of the different-length bolts while replacing an ac compressor on a 3.0l v6 Toyota Avalon. It’s still on the road (I know the guy) but the owner has no idea there’s a dime-sized hole in an oil passage in the block held sealed by JB-Weld. 50k+ miles since.

ALWAYS KEEP HARDWARE ORGANIZED


r/MechanicsAnonymous • • Aug 08 '19

I went to go see a 2008 Honda Accord EXL and when it didn’t start the guy at the Toyota dealership said it was because it hadn’t been moved in 3 months, does the car sitting in one spot for a long time play a part in it not turning on or is the guy just trying to cheat me?

2 Upvotes

r/MechanicsAnonymous • • Jun 28 '19

Rookie mistake

2 Upvotes

This was a couple years back when I still worked at Audi, and I was replacing a longblock on a Q5. The block had a porous spot and was leaking oil. Anyways, while transferring the parts over to the new block, manifold, turbo etc, I forgot to take the high pressure fuel pump roller tappet out of the old engine. Put the new engine in, put oil in it, and it fired right up, albeit with a slight clatter at first. I figured it was just the lifters pumping up, and shrugged it off. Let the car idle for about 25 mins, drove on to the street and as soon as I put my foot down a bit the engine sputtered and died. Wouldn't start again. Had the car towed back into the shop. Pulled the high pressure fuel pump out, cam lobe totally fucked, scored to all shit. High pressure fuel pump was bent downwards from being hit by the cam lobe. Ended up robbing the good exhaust cam from the old engine, and changed the fresh oil out, due to it now being full of fuel. Totally fine after that, and I learned a valuable lesson


r/MechanicsAnonymous • • Jun 14 '18

87 Mazda 323 S.O.S

2 Upvotes

Just joined this subreddit in order to get some advice on replacing the fuel system in my Mazda 323. Initially it was just a bad fuel pump but when I went to go replace I discovered that the entire fuel sending unit was damaged in the fuel tank. Of course Mazda doesn't manufacture any parts that could replace it so I was wondering if I should just go ahead and redo the entire fuel system. Injectors and all, any input would help


r/MechanicsAnonymous • • Jan 01 '18

Hi, I'm Ellenor, and I currently have a Hyundai Accent with two cylinder low compression. I have put extremely thick (15+W/30+) oil in it.

2 Upvotes

That's the substance of my confession.


r/MechanicsAnonymous • • Oct 14 '17

Need advice

2 Upvotes

Hey guys, first time on here. I recently bought a VW golf Estate GT edition 2.0 (5 days ago) Had all the oil, filters and liquids changed and a new thermostat put in. But the past two days when I start to slow down when coming to a roundabout or junction or even just to park the Rpm drops to zero and the engine cuts off. Also if I'm driving quite fast and as soon as I take my foot of the gas pedal the Rpm drops to zero and the engine cuts off. The car was bought from an elderly gentleman who has told me that the car hasn't been driven in 8 months. There is still quite a lot of black soot/smoke/liquid coming out of the exhaust pipe. Also occasionally if the car is sitting in neutral the head lights will flicker then the Rpm will drop to zero and the engine cuts off. I am going to my mechanic on Monday morning as I'm not overly sure what it could be causing this. Maybe the throttle body needs cleaned or replaced or the fuel injectors need cleaned or replaced. Anybody with any ideas/help/advice on this?