r/MechanicalEngineering • u/Strange_Rock_9003 • 17h ago
Open source matlab
Is there an open source matlab offline download for practice. If it's there where can I find it.
r/MechanicalEngineering • u/Strange_Rock_9003 • 17h ago
Is there an open source matlab offline download for practice. If it's there where can I find it.
r/MechanicalEngineering • u/HEROBRINE_GK • 2h ago
Looking for some interesting mini project ideas for mechanical engineering students.
I do know how to use some design softwares such as Solidworks and Fusion
What are some of the coolest projects you've come across or worked on?
Please do suggest some ideas
r/MechanicalEngineering • u/XKY_hardware • 3h ago
I am laying out a sealed aluminium box for an outdoor edge device: roughly 90 x 120 x 35 mm, about 8 W continuous inside, no fan, natural convection, and it has to hold IP65 or better. The profile is an extrusion cut to length, so the fin field is fixed by the die and I only get one shot at it.
Two mounting options for the same fin count and pitch:
A. Fins on the top face, running front to back. Air enters at the front edge, runs up the channel and out the back. B. Fins on one side face, running vertically. The box is mounted on a pole, so that face is either shaded or sunlit depending on which side I pick.
What I can reason out on my own: in A the channel is horizontal along its length but open at both ends, so the boundary layer grows along the run and the chimney only starts working near the far end. In B the channel is vertical for its whole length, which should give a cleaner stack effect, but half the fin area faces sideways into still air and the pole bracket blocks part of the inlet. Radiation is not negligible at these temperatures either, and a top face sees sky, which is a different boundary condition from a vertical face seeing ground and a wall.
The part I cannot settle by argument is how much of the difference is geometry and how much is the mounting. The die costs money and the lead time is short but not free, so I would rather not pick wrong.
Three specific questions for people who have measured this:
On a box this size, is the vertical-channel advantage big enough to beat the sunlit-face penalty, or do they roughly cancel and I should choose on dust and water instead?
Does anyone have a rule of thumb for how much fin height stops paying off once the channel is that short? My instinct is that past a certain ratio the added surface is at the same temperature as the air in the channel and only adds mass.
For a sealed box, does the internal conduction path matter more than the external fin area? I have seen builds where a 2 mm air gap between the hottest component and the wall undid a very good external fin design.
I am not looking for a formula, more for what actually bit you in a real enclosure. Happy to share what the extrusion and machining side looks like if it helps - the fin root radius and the minimum wall are the two things that decide whether the die is even feasible, and they are usually set by the toolmaker rather than the thermal engineer.
r/MechanicalEngineering • u/Cocoa1202 • 1h ago
Hi guys! Could you give me some tips about discrete elements analysis? And what softwares can I use? Do you have tutorials or something? It is for a rotatory cocoa dryer project!
I know about Altair EDEM and Ansys but i think there is a licence
Thanksss
r/MechanicalEngineering • u/Automatic_Click_2762 • 7h ago
Du bist Berufseinsteiger/in im Ingenieurwesen und hast schon erste Werksprojekte in der Produktion umgesetzt (z. B. Prozessoptimierung, Automatisierung, Umbau oder neue Anlagen)? Dann suchen wir genau dich! Deine Teilnahme hilft uns dabei, ein System zu entwickeln, das anderen Ingenieuren beim Übergang vom Studium in den Beruf helfen kann.
Bitte beantworte die Fragen in diesem Google Forms Sheet:
r/MechanicalEngineering • u/Minimum_Bird_4875 • 23h ago
I’m curious about the automotive career path and I’d like to get some projects together. My expendable income is essentially zero for the next year while I finish my degree. That being said I do buy stuff I can’t afford occasionally. Does anyone have advice for engaging with anything relevant to automotive, engines, power train, etc
r/MechanicalEngineering • u/Strict_Complaint1187 • 20h ago
Hi there,
looking for a bit of advice when it comes to the maths side of HNC engineering.
For context, I’m 25 and am currently in my first year as a plant mechanic apprentice and doing quite well. This is my second apprenticeship, first being stonemasonry which I finished about 6 years ago but fancied a change into engineering.
I also worked in offshore oil and gas for a year which sparked my interest in engineering.
Reason for doing a HNC alongside the apprenticeship is to build up my theoretical/academic side to hopefully move into marine/offshore engineering in the future.
Main problem is I did not take maths seriously at all in school and didn’t even get to the point of doing algebra or trigonometry which I very much regret as I get older.
Day to day I get on fine with what I need and have a good grasp on schematics, electrical, hydraulics, mechanical systems it’s really just the maths that I can see being a problem.
To make a short story long, has anyone gone into engineering with poor maths skills? Has anyone done the course that has any advice or experience you can share?
Cheers
r/MechanicalEngineering • u/RedRaiderRocking • 1d ago
I cannot for the love of me break out of project engineering. I’ve gotten so many interviews for awesome roles but when it comes to any technical related or specialized experience i always fall short.
I always answer I don’t have X but have done Y/Z that is transferable to X. This has gotten me far in interviews but I always fall short after 3rd round when im grilled on specialized experience.
For reference I’m a Project engineer for the federal government which is far worst than being a project engineer in the private industry.
r/MechanicalEngineering • u/Legitimate-Compote89 • 1d ago
Hey, I’m Jay I’m a high school sophomore and I’ve been working on this project for a while now. I have some questions about tolerances for CNC milling, shape optimization and overall design work.
Here are the specifics that I hope to achieve.
0.76m total height, ≈0.63m reach (tool excluded), 0.75kg rated payload, >45deg/s rotation on each axis, about precision I’ll do my best but it’s mostly negligible. All using stepping motors and 6061 aluminium.
I plan on using thermal expansion and shrinkage for pretty much all bore-bearing and bore-roller fittings.
It’s costly to contain liquid nitrogen so I’ll use an air fryer or/and dry ice with absolute alcohol to hopefully prevent water condensation. Tightest tolerance the manufacturer provides is 0.02 but realistically I can’t afford it so 0.05 it is.
In the design I went with -0.105mm but wasn’t really sure about it, for shaft fittings +/-0, -0.07mm on the rotors and +0.14mm on output holes. Now that I think about it -0.105 might be much considering that I can’t heat the plates past 70C if anodized. All parts will be commissioned to JLCCNC
I’d like to cut down on the weight as much as possible, so how do I properly pocket the parts similar to the side plate?
Side question, three stages on the fifth axis total to 26.9:1
Should I add thrust needle bearings on p2 and p4? It seems right but is probably redundant.
r/MechanicalEngineering • u/SnooWoofers1995 • 20h ago
I'm a naval architect building a bolt torque reference tool for my team and others that might find it useful. This is to help us/you specifying parts with bolted connections for fabrication.
VDI 2230 and ISO cover the standard lube conditions (dry, zinc, oiled, anti-seize, moly), so those are already built in.
What I couldn't find in the literature, VDI, or ISO are the friction parameters for Loctite (e.g., 242/243) or Tef-Gel (PTFE paste, which we use all the time on stainless fasteners in aluminum). Right now I just leave a custom friction input for those rather than guessing a preset.
What do people actually do in these situations? Do you treat wet Loctite like light oil and Tef-Gel like anti-seize/moly, or do you have specific values you use?
r/MechanicalEngineering • u/Important_Field_8096 • 5h ago
I’m building more and more projects but all my project thinking is in my head. To put it on paper engineers must do technical 2d drawings. I’m alright at 3d, but am I doing 2d correctly? Is there a specific way to do it or is it preference?
r/MechanicalEngineering • u/Parabellum_3 • 1d ago
Hi all, I am struggling to get a job in the tech field like many of us are. The AI boom, coupled with thousands of layoffs and fierce competition between me and experienced professionals have unfortunately put me in a situation where finding something that would work out for me in this field has become unfeasible.
I have a bachelors, masters, and multiple certifications in the IT/Cybersecurity field, yet lack the experience. I have been trying to land an entry-level position for the past few months with no success.
With that said, after doing a bit of research, I am considering going back to school for a mechanical engineering degree to start from scratch. And as I've heard, it is largely AI-proof in a lot of ways and the job market is expected to steadily grow. My ultimate goal is to work in the aerospace field (which I hoped I could do via IT positions), and I believe that Mech E can give me flexible skills to work in that environment or elsewhere if needed.
I am almost 28, so I feel like I shouldn't wait too long to make a decision about this. Would you say it is worth pursuing this path given the current circumstances? Or, will I have the same problems regarding finding employment afterwards?
r/MechanicalEngineering • u/GrandGarand • 1d ago
6 months, a couple hundred applications, two interviews
r/MechanicalEngineering • u/PerspectiveNo794 • 12h ago
When building a 2D finite-volume CFD solver from scratch, verifying the incompressible NS implementation requires standard benchmark problems with reference data.
The 1982 Ghia et al. benchmark for lid-driven cavity flow is still the gold standard for checking velocity profiles along centrelines across various Reynolds numbers.
For anyone who has written their own fluid dynamics solvers: what edge cases or boundary condition bugs did you run into when trying to match Ghia et al. velocity profiles at higher Reynolds numbers (1000, 2000)?
r/MechanicalEngineering • u/Crazy_Pick_4430 • 23h ago
r/MechanicalEngineering • u/Memelutron • 23h ago
So I just received an offer for Manufacturing Intern: General Assembly based in Warren. Do y’all have any information on what to expect, how the overall experience is, and what exactly I’ll be working on? Thanks!
r/MechanicalEngineering • u/botokely69 • 15h ago
I'm interested to know if some of you are using AI agents in your daily work and what kind of tasks you use them for
r/MechanicalEngineering • u/placeSun • 1d ago
r/MechanicalEngineering • u/Excellent_Bus7460 • 1d ago
Hi everyone!
I'm a first-year Mechanical Engineering student at LaGuardia Community College, and I have an assignment for my First Year Seminar class where I need to interview an engineer. You can be currently working in the industry, military, retired, or a professor.
The interview consists of about 15 questions covering your education, career path, and day-to-day job responsibilities. Since we all have busy schedules, this can be completed entirely asynchronously via email, Reddit DM, or a Google Form—whatever is easiest for you.
r/MechanicalEngineering • u/mechpain • 16h ago
Hello,
I just wanted to share my project of creating a cadsoftware native for local agents
I write a prompt into my CAD software via the browser, and it is transmitted to Ollama, which uses the qwen3:8b model.
When the request is sent, the GPU can be seen activating.
I am only at the beginning, and it is clear that this will eventually be integrated into more well-known software.
What do you think about this ?
Are you afraid for you job?
How long do you think it might take for this to show up in well-known software?
Are we going to see a shift similar to the one we’ve seen among software developers?
Like, just talk to an agent and see what happens?
I would really like to hear your thoughts on this topic
r/MechanicalEngineering • u/Acceptable_Town_4074 • 1d ago
r/MechanicalEngineering • u/isabella_sunrise • 2d ago
I recently became a big fan of the Decouple podcast which covers a lot of topics but has a focus on nuclear energy. This has made me hungry for more podcasts that go though mechanical engineering related topics. Any suggestions?
r/MechanicalEngineering • u/Raise3D_Technologies • 23h ago
For low-volume plastic parts I keep going back and forth on where the crossover sits. Printing wins on lead time and on geometry you can't machine, but once a part needs tight tolerances on mating faces or a consistent surface finish, machining starts to look better even at small quantities. Moulding only makes sense once the tooling cost is spread over enough parts. How do you decide? Is it a quantity threshold, or do tolerances or material certification push you off printing? Also, does anyone use printed parts as a bridge before committing to tooling, and how did you deal with the material behaviour differences between the printed and moulded versions?
r/MechanicalEngineering • u/RefuseFinancial • 1d ago
I can’t decide between three printers for my first machine. Is the Centauri Carbon 2 worth about $115 more than the Centauri 2, or is the cheaper one the smarter buy?
Here’s my situation. This is my first ever 3D printer purchase. I’m a recent mechanical engineering graduate looking for design and product development roles, and I’ve received feedback that I lack experience building things. So I want to design mechanical parts and print them, measure them against my CAD, and iterate on the design. Beyond that, I plan to print pretty much everything I can, including household organizers, brackets, tool holders and repairs, to get a hang of product design. Being unemployed, cost is an issue and I need to make a smart purchase. I can live frugally for next month to afford the Elegoo's Centauri Carbon 2, since the enclosure appeals to me.
My options are the Bambu A1 Mini at $214 (smallest bed size among all of them), the Centauri 2 at $229 from Elegoo’s eBay store, and the Centauri Carbon 2 (CC2) at $342 on Elegoo’s website. In previous posts I’ve read, people suggested stretching the budget and buying the CC2 instead of the Centauri 2 or the A1 Mini. But I can’t tell whether its advantages matter for someone just starting out, and the extra money isn’t small for me right now.
What would you do in my place? I’d really like to hear from people who have actually used these. Thanks!
TL;DR: I want to learn more of product design by 3d printing. I’m choosing between the A1 Mini ($214), the Centauri 2 ($229), and the Centauri Carbon 2 ($342). Is the CC2 worth the extra $115?
Edit: Thank you everyone! Bought the Elegoo Centauri Carbon Printer. Really excited to print.