r/MechanicalEngineering • u/Hashhhhhhhhhhhhhhhh_ • 6h ago
r/MechanicalEngineering • u/AutoModerator • Sep 01 '26
Quarterly /r/MechanicalEngineering Career/Salary Megathread
Are you looking for feedback or information on your salary or career? Then you've come to the right thread. If your questions are anything like the following example questions, then ask away:
Am I underpaid?
Is my offered salary market value?
How do I break into [industry]?
Will I be pigeonholed if I work as a [job title]?
What graduate degree should I pursue?
Message the mods for suggestions, comments, or feedback.
r/MechanicalEngineering
•
u/yaoz889
•
Mar 23 '26
2026 US Mechanical Engineer Survey Results
I would like to thank you everyone for participating in the annual 2026 ME Salary survey. Total respondents was a little over 600, so less than last year, but about 589 US responses.
Background:
Here are the main results. It took about 2 hours to "clean" the data manually. Afterwards, I basically used Gemini to create the graphs + tables, since last time it literally took me about 7 hours to do everything manually on Excel last time and there were still questions. The key points and takeaways from the data is a combination of AI and editing the information to be more readable (still took 4 hours). In addition, I wouldn't worry about math too much, since Gemini basically just used python code to decipher the edited CSV file.
Industry:
| Industry | Number of Respondents |
|---|---|
| Manufacturing | 175 (29.7%) |
| Aerospace/Defense | 173 (29.4%) |
| Technology (FANG, AI, Robotics, etc.) | 54 (9.2%) |
| MEP (HVAC, Construction, etc.) | 38 (6.5%) |
| Utilities (Power, Renewables, etc.) | 35 (5.9%) |
| Pharmaceutical & Medical Devices | 31 (5.3%) |
| Oil and Gas | 28 (4.8%) |
| Consumer Goods | 15 (2.5%) |
| Government | 11 (1.9%) |
There were some other industries like nuclear, logistics, and etc. but the few data points aren't included in the table for brevity. The data was included in the total set though
A majority of the mechanical engineers trends will use the Aerospace/Defense and Manufacturing data since there is the most data that is available
Salary and Year of Experience:
*Note: Total Compensation/Salary = Base Salary + Bonus + RSU + Base Salary * 401k Match
If you want to look at one graph and table to explain the progression track here it is:

| YOE Range | Median Base (Unadj) | Median Total (Unadj) | Median Base (COL Adj) | Median Total (COL Adj) | Count |
|---|---|---|---|---|---|
| 0-1 Year | $87,000 | $96,036 | $81,699 | $87,368 | 43 |
| 2 Years | $84,000 | $91,046 | $84,615 | $90,909 | 71 |
| 3 Years | $94,550 | $105,965 | $94,082 | $102,289 | 62 |
| 4-5 Years | $104,000 | $119,770 | $94,881 | $107,762 | 116 |
| 6-8 Years | $120,000 | $136,800 | $112,500 | $127,911 | 119 |
| 9-12 Years | $125,500 | $146,985 | $123,444 | $142,555 | 96 |
| 13-20 Years | $157,290 | $181,840 | $144,254 | $171,731 | 64 |
| 20+ Years | $196,500 | $211,426 | $163,399 | $191,042 | 15 |
Key Takeaways:
The "Benefit Gap": The space between the solid lines (Total Compensation) and the dashed lines (Base Salary) represents the added value from annual bonuses and employer 401k matching. For a mid-career engineer (6-8 years), this extra value is roughly $16,800 on average.
Late Career Leverage: As engineers gain seniority (13+ years), the gap between base salary and total compensation grows significantly, suggesting that bonuses and incentive programs make up a larger portion of the package for senior-level and leadership roles.
Purchasing Power: The COL Adjusted lines (Orange) consistently track below the un-adjusted lines (Blue), highlighting that high-paying mechanical engineering roles are frequently located in markets where the dollar doesn't stretch as far as the national average.
Education:

Majority of the respondents are at max a bachelor degree holder. However, there is still a significant number of master's students
Now about the age old question: does having a Master's degree lead to higher future salary?
Short Answer: In general, the answer is yes if there is a chance to specialize. It is explained in the table below:
| Industry | Career Stage | Education | Median Total (Unadj) | Median Total (COL Adj) | Count |
|---|---|---|---|---|---|
| Aerospace & Defense | 0-3 Years | Bachelors | $96,664 | $95,201 | 44 |
| Masters | $116,600 | $108,316 | 15 | ||
| 4-7 Years | Bachelors | $125,410 | $110,659 | 39 | |
| Masters | $173,000 | $148,432 | 9 | ||
| 8-15 Years | Bachelors | $161,750 | $140,202 | 33 | |
| Masters | $154,905 | $149,658 | 16 | ||
| 15+ Years | Bachelors | $207,080 | $187,505 | 7 | |
| Masters | $211,426 | $207,872 | 5 | ||
| Manufacturing | 0-3 Years | Bachelors | $88,220 | $93,452 | 52 |
| Masters | $93,740 | $91,850 | 6 | ||
| 4-7 Years | Bachelors | $108,992 | $106,701 | 45 | |
| Masters | $129,800 | $128,407 | 12 | ||
| 8-15 Years | Bachelors | $135,425 | $142,440 | 44 | |
| Masters | $136,298 | $129,984 | 8 | ||
| 15+ Years | Bachelors | $182,650 | $187,127 | 5 |
Now you can see that for manufacturing, the benefits is not as prominent, while it is evident in aerospace. This makes sense, since Aerospace have very high specialization salary, for instance: hypersonic or eVtol which pays a ton for total compensation based on years of experience.
Answer: if your company pays for your masters, do it, but it doesn't seem that beneficial near the end of your career.
Internships & Coops:

Key Insights:
The "Experienced" Majority: A combined 85% of respondents completed at least one internship or co-op. This underscores how critical early-career work experience has become for landing a full-time role in mechanical engineering.
Co-op Advantage: The 20% of respondents with "3+ Internships" often represent those in formal co-op programs (where students rotate between school and work over several years). These candidates typically command higher starting salaries shown in the table below:
| Industry | 0-1 Internship | 2+ Internships | New Grad Premium |
|---|---|---|---|
| Aerospace & Defense | $82,000 | $91,500 | +$9,500 |
| Manufacturing | $74,000 | $82,000 | +$8,000 |
| MedTech | $80,500 | $89,000 | +$8,500 |
Certifications:
Here is the graph of a major certifications from the survey:

We always see a question on whether certifications are worth it:
Aerospace & Defense: Certification vs. Total Compensation
| Experience | Education | Has Cert? | Median Unadj. Total | Median Adj. Total | Count |
|---|---|---|---|---|---|
| 0-3 Years | Bachelors | No | $97,900 | $95,426 | 41 |
| Yes | $95,040 | $64,653 | 3 | ||
| 4-7 Years | Bachelors | No | $125,315 | $106,672 | 36 |
| Yes | $128,580 | $138,258 | 3 | ||
| 8-15 Years | Bachelors | No | $159,660 | $139,839 | 31 |
| Yes | $280,425 | $177,895 | 2 | ||
| Masters | No | $151,410 | $142,043 | 13 | |
| Yes | $209,658 | $216,142 | 3 |
Manufacturing: Certification vs. Total Compensation
| Experience | Education | Has Cert? | Median Unadj. Total | Median Adj. Total | Count |
|---|---|---|---|---|---|
| 0-3 Years | Bachelors | No | $88,020 | $91,944 | 43 |
| Yes | $90,450 | $99,746 | 9 | ||
| 4-7 Years | Bachelors | No | $108,805 | $106,615 | 36 |
| Yes | $108,992 | $106,701 | 9 | ||
| 8-15 Years | Bachelors | No | $135,000 | $136,541 | 31 |
| Yes | $136,000 | $151,111 | 13 | ||
| Masters | No | $152,212 | $122,728 | 6 | |
| Yes | $134,815 | $141,636 | 2 |
Key Findings:
High-Experience Premium in Aerospace: The most dramatic impact of certification appears in the mid-to-late career in Aerospace & Defense (8–15 years). Engineers with a Bachelors and a certification earn a median total compensation significantly higher than those without. Even among Masters holders in this range, certified engineers have a median total comp of $209k vs $151k for non-certified.
Manufacturing Stability: In the Manufacturing industry, certifications (often Six Sigma or FE/PE) lead to a very modest increase in un-adjusted base pay, but a more noticeable improvement in COL-adjusted pay. This suggests that certified engineers in Manufacturing may have more flexibility to find high-paying roles in lower-cost-of-living areas.
The "Entry-Level Paradox": For junior engineers (0–3 years), having a certification (likely the FE) does not immediately result in a salary premium. In fact, in Aerospace, the un-adjusted median for those with certifications was slightly lower, possibly because those engineers are still in entry-level rotation programs where pay is standardized regardless of credentials.
Masters + Certification: For those who already have a Masters, adding a certification provides a significant late-career boost (as seen in the 8–15 year group in Aerospace).
Answer: Certification can be worth it for select industries. PE is known for civil to open doors and increase pay.
Job Titles:

| Job Role Category | Number of Respondents | Percentage |
|---|---|---|
| Mechanical Engineer (General) | 229 | 38.9% |
| Design Engineer | 97 | 16.5% |
| Project & Systems Engineer | 59 | 10.0% |
| Management & Leadership | 55 | 9.3% |
| Manufacturing & Process Engineer | 54 | 9.2% |
| Specialized (Thermal, Stress, R&D) | 34 | 5.8% |
| Other / Misc | 61 | 10.4% |
Key Insights:
General vs. Specialized: Nearly 40% of respondents identify with the broad title of "Mechanical Engineer," which often includes generalists or those in mid-level positions.
The Design Dominance: Design Engineering is the second largest single group, reflecting the high demand for CAD-based design and product development across aerospace, tech, and manufacturing industries.
Transition to Leadership: About 9% of respondents hold titles in Management & Leadership (Manager, Director, VP), which led to a higher salary
Project and Systems focus: 1 in 10 engineers focuses on Project or Systems Engineering, highlighting the importance of multidisciplinary coordination and technical management in modern engineering projects.
The Specialty Niche: The "Specialized" category includes highly technical roles like Thermal Analysis, FEA, Simulation, and Research & Development, which often require higher educational levels or deep domain expertise.
Salary Grade vs. Salary:
| Grade Level | Industry | Median Annual Salary | Typical Experience (YOE) | Sample Count |
|---|---|---|---|---|
| Level 1 (Entry) | Aerospace & Defense | $88,400 | 1.0 year | 39 |
| Manufacturing | $80,250 | 2.0 years | 39 | |
| Level 2 (Mid) | Aerospace & Defense | $102,273 | 3.8 years | 48 |
| Manufacturing | $95,000 | 5.0 years | 71 | |
| Level 3 (Senior) | Aerospace & Defense | $130,000 | 8.0 years | 57 |
| Manufacturing | $119,600 | 9.0 years | 50 | |
| Level 4 (Lead/Manager) | Aerospace & Defense | $170,500 | 11.0 years | 22 |
| Manufacturing | $136,000 | 11.0 years | 11 | |
| Level 5+ (Principal/Director) | Aerospace & Defense | $206,000 | 20.0 years | 9 |
| Manufacturing | $136,500 | 14.0 years | 4 |
Efficiency of Experience: In Aerospace, engineers tend to reach Level 2 and Level 3 roughly 1–1.2 years faster than those in Manufacturing, while also earning more.
The Level 4 Ceiling: In Manufacturing, the salary jump from Grade 3 to Grade 4 is roughly $16k, whereas in Aerospace, that same promotion yields a massive $40k jump in median base salary.
Which Industry Pays the Most?

Major Caveat: at 16+ YOE, the data points are only a couple, which skews the data upward.
Based on the comprehensive US survey data, the Technology (FANG, Robotics, AI, Consumer Electronics) industry emerges as the highest-paying sector for mechanical engineers when considering total compensation (Base Salary + Annual Bonus + 401k Match).
Tech Compensation Package:
| Years of Experience | Avg. Total Comp (Unadjusted) | Avg. Total Comp (Adjusted for COL) | Number of Respondents |
|---|---|---|---|
| 0-2 YOE (Entry) | $117,316 | $100,292 | 7 |
| 3-5 YOE (Junior) | $180,854 | $138,040 | 17 |
| 6-10 YOE (Mid-Level) | $182,773 | $134,543 | 14 |
| 11-15 YOE (Senior) | $259,993 | $220,256 | 11 |
| 16+ YOE (Principal) | $244,775 | $177,043 | 5 |
The Oil and Gas industry stands out as the second most lucrative sectors for mechanical engineers, particularly as they reach senior and principal levels. While Tech offers the highest overall unadjusted compensation, Oil and Gas actually offers the highest Cost of Living (COL) Adjusted compensation, meaning your real purchasing power in this industry is the highest among all major sectors.
| Years of Experience | Avg. Total Comp (Unadjusted) | Avg. Total Comp (COL Adjusted) | Number of Respondents |
|---|---|---|---|
| 0-2 YOE | $95,864 | $83,178 | 5 |
| 3-5 YOE | $117,289 | $111,155 | 7 |
| 6-10 YOE | $138,959 | $139,773 | 7 |
| 11-15 YOE | $204,097 | $219,757 | 6 |
| 16+ YOE | $408,040 | $399,276 | 3 |
Overtime Pay:

Industry Trends: Overtime pay is slightly more common in Manufacturing (where production deadlines are rigid) and Consulting/EPC (where hours are billable to clients) compared to R&D or Aerospace.
Work Hours:

| Work Hours Category | Number of Respondents | Percentage |
|---|---|---|
| Exactly 40 Hours | 337 | 57.2% |
| 41-45 Hours | 146 | 24.8% |
| 46-50 Hours | 49 | 8.3% |
| <40 Hours | 50 | 8.5% |
| >50 Hours | 7 | 1.2% |
Key Observations:
The "40-Hour" Standard: Over half of the engineers surveyed manage to stick to a strict 40-hour week, which is a positive sign for work-life balance in the profession.
Moderate Overtime: Roughly a quarter of engineers work an extra 1 to 5 hours a week (41-45 hours total), often representing "straight time" or expected professional dedication without formal overtime pay.
The High-Hours Exception: Only a small fraction (under 10%) report working more than 45 hours consistently. This is significantly lower than in fields like investment banking or high-tier management consulting, suggesting a relatively stable lifestyle for most US mechanical engineers.
Flexibility: About 8.5% of respondents work fewer than 40 hours, which often aligns with part-time roles, senior consultants, or companies with flexible "9/80" schedules where some weeks are shorter.
401k Summary:

| Match Rate Range | Count of Responses | Percentage |
|---|---|---|
| 4% - 5% | 211 | 35.8% |
| 1% - 3% | 125 | 21.2% |
| 6% - 7% | 120 | 20.4% |
| 8% - 10% | 65 | 11.0% |
| No Match (0%) | 56 | 9.5% |
| > 10% / Other | 12 | 2.0% |
Key Takeaways:
The Industry Standard: A 4–5% match is clearly the most common benefit, covering over a third of the surveyed population.
High-Tier Benefits: Roughly 13% of engineers receive a match of 8% or higher, which often indicates highly competitive benefit packages in specialized industries.
Retirement Security: The low percentage of "No Match" responses (under 10%) highlights that retirement contributions are a standard and expected part of total compensation in the US mechanical engineering market.
Remote Work Distribution:

| Remote Category | Number of Respondents | Percentage |
|---|---|---|
| Fully In-Person (0%) | 248 | 42.1% |
| Mostly In-Person (1-39%) | 163 | 27.7% |
| Hybrid (40-60%) | 118 | 20.0% |
| Fully Remote (100%) | 38 | 6.5% |
| Mostly Remote (61-99%) | 22 | 3.7% |
Key Insights:
The "Hands-On" Requirement: Over 40% of mechanical engineers are required to be in the office or on-site 100% of the time. This is significantly higher than other engineering fields like Software or Data Science.
The Hybrid Standard: Roughly 48% of the workforce has some form of hybrid flexibility (ranging from 1% to 60% remote). Many companies now allow 1–2 days of remote work for documentation, CAD modeling, or administrative tasks.
Fully Remote is Rare: Only 6.5% of mechanical engineers work fully remotely. These roles are typically in specialized areas like pure Simulation/FEA, Project Management, or Sales Engineering where physical hardware access is not required daily.
The Hybrid Middle Ground: The 40–60% range (often 2–3 days per week) is a common "sweet spot" for engineering firms trying to balance teamwork/lab time with employee flexibility.
Paid Time Off (Days):
*Note: one issue is many jobs had unlimited sick time, which I just added 10 days. Next time I will edit the form to separate the sick days so it makes more sense.

| PTO Category (Includes Sick Days) | Number of Respondents | Percentage |
|---|---|---|
| 0–10 days | 30 | 5.2% |
| 11–15 days | 112 | 19.5% |
| 16–20 days | 160 | 27.9% |
| 21–25 days | 100 | 17.4% |
| 26–30 days | 61 | 10.6% |
| 31+ days | 32 | 5.6% |
| Unlimited | 78 | 13.6% |
Key Insights:
The " 3 - 5 Week" Benchmark: The majority of mechanical engineers (over 45%) receive between 16 and 25 days of PTO.
The Rise of Unlimited PTO: About 13.6% of respondents now have "Unlimited" PTO.
Generous Packages: Roughly 16% of engineers receive more than 30 days of PTO, which is often a hallmark of high-seniority roles, government/defense positions, or companies that reward long tenure.
The Lean End: Only about 5% of respondents are on the low end with 10 days or fewer, suggesting that a minimum of two weeks of PTO is a standard baseline for the industry.
Now some of you might have questions regarding years of experience and PTO:

Average PTO by Experience (Fixed PTO)
| Experience Level | Average PTO Days (per year) | Typical Range (25th-75th Percentile) |
|---|---|---|
| 0–2 Years | 16.9 | 10–15 days |
| 3–5 Years | 19.6 | 15–20 days |
| 6–10 Years | 21.1 | 20 days |
| 11–15 Years | 24.5 | 20–25 days |
| 16+ Years | 26.5 | 25–30+ days |
Analysis of the Trend:
The "Standard Jump": Many engineers start with 15 days (3 weeks) and see their first significant "tenure bump" to 20 days (4 weeks) after reaching the 5-year mark.
Senior Perks: By the time an engineer hits 15+ years of experience, a 5-week (25-day) or 6-week (30-day) PTO package becomes the new baseline.
Job Hopping Factor: The data suggests that while tenure within a single company increases PTO, "job hopping" every 3–5 years also allows engineers to negotiate higher starting PTO tiers at their new employers, effectively "skipping" the long wait for tenure-based increases.
Health Insurance:

| Satisfaction Level | Number of Respondents | Percentage |
|---|---|---|
| Free / Excellent | 38 | 6.5% |
| Good (Low Premium/High Coverage) | 211 | 36.3% |
| Average | 288 | 49.5% |
| Poor (High Premium/Low Coverage) | 41 | 7.0% |
| Other / Misc | 4 | 0.7% |
Key Insights:
The "Standard" Plan: Almost 50% of engineers describe their insurance as "Average," highlighting that standard employer-sponsored health insurance is common but not particularly outstanding in terms of premiums or coverage levels.
Competitive Benefits: Over 42% of respondents fall into the "Good" or "Free" categories. The 6.5% who receive "Free/Excellent" coverage likely work for highly competitive tech firms, established defense contractors, or companies that use premium benefits as a retention tool.
Under-Served Minority: Roughly 7% of the engineering workforce feels their health insurance is "Poor," usually characterized by high out-of-pocket costs and high monthly premiums.
Biggest Cons for Mechanical Engineering:

| Category | Typical Concerns Mentioned |
|---|---|
| Workload & Hours (112 mentions) | High pressure, tight deadlines, long hours, and poor work-life balance. Many mentioned "start-up energy" even in established firms. |
| Salary & Compensation (73 mentions) | Low raises (2–3%), "salary plateauing" early in the career, and the absence of stock options or significant bonuses compared to tech. |
| Remote Work Limits (47 mentions) | Frequent requirements to be in the office or on the manufacturing floor with "no remote option" or "No WFH" (Work From Home) policies. |
| Career Growth (35 mentions) | Concerns about "pigeon-holing," slow internal promotion tracks, and becoming "stagnant" in one technical area. |
| Red Tape & Bureaucracy (26 mentions) | Excessive paperwork, slow corporate processes, "red tape," and inefficient management systems. |
Biggest Pros for Mechanical Engineering:

| Category | Typical Benefits Mentioned |
|---|---|
| Salary & Comp (86 mentions) | Competitive base pay, annual bonuses, and strong 401k matching programs. |
| Work-Life Balance (75 mentions) | Flexible schedules, reasonable working hours (standard 40h), and generous PTO. |
| Culture & People (70 mentions) | Great teammates, supportive management, and a collaborative "team-first" environment. |
| Interesting Work (65 mentions) | Designing "cool" products, working on challenging technical problems, and having a clear mission. |
| Job Stability (28 mentions) | Long-term security, consistent demand for the role, and the stability of established firms. |
| Remote/Hybrid (27 mentions) | The ability to work from home part-time or have flexible geographic location. |
Direct Insights from Engineers:
On Work Quality: "The actual work we do is really interesting, fun, and rewarding. Getting to see a design go from CAD to a physical product is the best part."
On Culture: "Great coworkers and a team environment where people actually mentor you instead of just giving you tasks."
On Flexibility: "Remote flexibility and a management team that trusts you to get your work done without micromanaging your hours."
On Compensation: "The total compensation package—including the 401k match and the annual bonus—makes the technical pressure worth it."
Now for Improvements on Suggestions on the Survey:
Regarding the COL instructions: totally my fault, sorry for not catching it. All of you were able to figure it out, but changed instructions from 0 - 2, so it makes a lot more sense now.
Adding a column for manager and IC: totally good suggestion, already added to new survey for 2027
Regarding adding gender or age: I will not add this into the survey just to make it more anonymous. I really do not see the value in this data, and I recommend just using government data to find the data.
Regarding the health insurance question: I have implemented the change on making it have three questions: annual premium, annual deductible, person coverage. I really did not want to make this part too complicated with max out of pocket and copay and etc. I think the premium, coverage and deductible is acceptable amount.
Edited the salary section to organize the % 401k match, salary, bonus, RSU to be in the same section making it easier, but separated the questions.
Comparison from the 2024, 2025 and 2026 Reddit Survey Results will be in another post, since this post is getting insanely long. Again, any other improvements or suggestions, please just comment below.
TDLR: Just check the 1st salary graph if you want the main results.
r/MechanicalEngineering • u/Strange_Rock_9003 • 13h ago
Open source matlab
Is there an open source matlab offline download for practice. If it's there where can I find it.
r/MechanicalEngineering • u/XKY_hardware • 0m ago
Same extruded profile, fins vertical on top vs on the side: how much of the delta is real before I commit a die?
I am laying out a sealed aluminium box for an outdoor edge device: roughly 90 x 120 x 35 mm, about 8 W continuous inside, no fan, natural convection, and it has to hold IP65 or better. The profile is an extrusion cut to length, so the fin field is fixed by the die and I only get one shot at it.
Two mounting options for the same fin count and pitch:
A. Fins on the top face, running front to back. Air enters at the front edge, runs up the channel and out the back. B. Fins on one side face, running vertically. The box is mounted on a pole, so that face is either shaded or sunlit depending on which side I pick.
What I can reason out on my own: in A the channel is horizontal along its length but open at both ends, so the boundary layer grows along the run and the chimney only starts working near the far end. In B the channel is vertical for its whole length, which should give a cleaner stack effect, but half the fin area faces sideways into still air and the pole bracket blocks part of the inlet. Radiation is not negligible at these temperatures either, and a top face sees sky, which is a different boundary condition from a vertical face seeing ground and a wall.
The part I cannot settle by argument is how much of the difference is geometry and how much is the mounting. The die costs money and the lead time is short but not free, so I would rather not pick wrong.
Three specific questions for people who have measured this:
On a box this size, is the vertical-channel advantage big enough to beat the sunlit-face penalty, or do they roughly cancel and I should choose on dust and water instead?
Does anyone have a rule of thumb for how much fin height stops paying off once the channel is that short? My instinct is that past a certain ratio the added surface is at the same temperature as the air in the channel and only adds mass.
For a sealed box, does the internal conduction path matter more than the external fin area? I have seen builds where a 2 mm air gap between the hottest component and the wall undid a very good external fin design.
I am not looking for a formula, more for what actually bit you in a real enclosure. Happy to share what the extrusion and machining side looks like if it helps - the fin root radius and the minimum wall are the two things that decide whether the die is even feasible, and they are usually set by the toolmaker rather than the thermal engineer.
r/MechanicalEngineering • u/Automatic_Click_2762 • 4h ago
Opinion Poll for German engineers: Werksprojekte in der Praxis - Erfahrungen junger Ingenieure gefragt
Du bist Berufseinsteiger/in im Ingenieurwesen und hast schon erste Werksprojekte in der Produktion umgesetzt (z. B. Prozessoptimierung, Automatisierung, Umbau oder neue Anlagen)? Dann suchen wir genau dich! Deine Teilnahme hilft uns dabei, ein System zu entwickeln, das anderen Ingenieuren beim Übergang vom Studium in den Beruf helfen kann.
Bitte beantworte die Fragen in diesem Google Forms Sheet:
r/MechanicalEngineering • u/Minimum_Bird_4875 • 20h ago
Broke but want to work with cars
I’m curious about the automotive career path and I’d like to get some projects together. My expendable income is essentially zero for the next year while I finish my degree. That being said I do buy stuff I can’t afford occasionally. Does anyone have advice for engaging with anything relevant to automotive, engines, power train, etc
r/MechanicalEngineering • u/Strict_Complaint1187 • 17h ago
HNC engineering
Hi there,
looking for a bit of advice when it comes to the maths side of HNC engineering.
For context, I’m 25 and am currently in my first year as a plant mechanic apprentice and doing quite well. This is my second apprenticeship, first being stonemasonry which I finished about 6 years ago but fancied a change into engineering.
I also worked in offshore oil and gas for a year which sparked my interest in engineering.
Reason for doing a HNC alongside the apprenticeship is to build up my theoretical/academic side to hopefully move into marine/offshore engineering in the future.
Main problem is I did not take maths seriously at all in school and didn’t even get to the point of doing algebra or trigonometry which I very much regret as I get older.
Day to day I get on fine with what I need and have a good grasp on schematics, electrical, hydraulics, mechanical systems it’s really just the maths that I can see being a problem.
To make a short story long, has anyone gone into engineering with poor maths skills? Has anyone done the course that has any advice or experience you can share?
Cheers
r/MechanicalEngineering • u/SnooWoofers1995 • 17h ago
What friction parameters do you use for bolt torque with Loctite or Tef-Gel?
I'm a naval architect building a bolt torque reference tool for my team and others that might find it useful. This is to help us/you specifying parts with bolted connections for fabrication.
VDI 2230 and ISO cover the standard lube conditions (dry, zinc, oiled, anti-seize, moly), so those are already built in.
What I couldn't find in the literature, VDI, or ISO are the friction parameters for Loctite (e.g., 242/243) or Tef-Gel (PTFE paste, which we use all the time on stainless fasteners in aluminum). Right now I just leave a custom friction input for those rather than guessing a preset.
What do people actually do in these situations? Do you treat wet Loctite like light oil and Tef-Gel like anti-seize/moly, or do you have specific values you use?
r/MechanicalEngineering • u/Legitimate-Compote89 • 1d ago
Building the wrist of a 6DOF robotic manipulator
Hey, I’m Jay I’m a high school sophomore and I’ve been working on this project for a while now. I have some questions about tolerances for CNC milling, shape optimization and overall design work.
Here are the specifics that I hope to achieve.
0.76m total height, ≈0.63m reach (tool excluded), 0.75kg rated payload, >45deg/s rotation on each axis, about precision I’ll do my best but it’s mostly negligible. All using stepping motors and 6061 aluminium.
I plan on using thermal expansion and shrinkage for pretty much all bore-bearing and bore-roller fittings.
It’s costly to contain liquid nitrogen so I’ll use an air fryer or/and dry ice with absolute alcohol to hopefully prevent water condensation. Tightest tolerance the manufacturer provides is 0.02 but realistically I can’t afford it so 0.05 it is.
In the design I went with -0.105mm but wasn’t really sure about it, for shaft fittings +/-0, -0.07mm on the rotors and +0.14mm on output holes. Now that I think about it -0.105 might be much considering that I can’t heat the plates past 70C if anodized. All parts will be commissioned to JLCCNC
I’d like to cut down on the weight as much as possible, so how do I properly pocket the parts similar to the side plate?
Side question, three stages on the fifth axis total to 26.9:1
Should I add thrust needle bearings on p2 and p4? It seems right but is probably redundant.
r/MechanicalEngineering • u/RedRaiderRocking • 1d ago
How did you break out of project engineering?
I cannot for the love of me break out of project engineering. I’ve gotten so many interviews for awesome roles but when it comes to any technical related or specialized experience i always fall short.
I always answer I don’t have X but have done Y/Z that is transferable to X. This has gotten me far in interviews but I always fall short after 3rd round when im grilled on specialized experience.
For reference I’m a Project engineer for the federal government which is far worst than being a project engineer in the private industry.
r/MechanicalEngineering • u/Important_Field_8096 • 1h ago
Am I drawing CAD drawings right?
I’m building more and more projects but all my project thinking is in my head. To put it on paper engineers must do technical 2d drawings. I’m alright at 3d, but am I doing 2d correctly? Is there a specific way to do it or is it preference?
r/MechanicalEngineering • u/Parabellum_3 • 1d ago
Considering switching from IT to Mech E.
Hi all, I am struggling to get a job in the tech field like many of us are. The AI boom, coupled with thousands of layoffs and fierce competition between me and experienced professionals have unfortunately put me in a situation where finding something that would work out for me in this field has become unfeasible.
I have a bachelors, masters, and multiple certifications in the IT/Cybersecurity field, yet lack the experience. I have been trying to land an entry-level position for the past few months with no success.
With that said, after doing a bit of research, I am considering going back to school for a mechanical engineering degree to start from scratch. And as I've heard, it is largely AI-proof in a lot of ways and the job market is expected to steadily grow. My ultimate goal is to work in the aerospace field (which I hoped I could do via IT positions), and I believe that Mech E can give me flexible skills to work in that environment or elsewhere if needed.
I am almost 28, so I feel like I shouldn't wait too long to make a decision about this. Would you say it is worth pursuing this path given the current circumstances? Or, will I have the same problems regarding finding employment afterwards?
r/MechanicalEngineering • u/GrandGarand • 1d ago
Any other fresh BSME graduates struggling to land a job?
6 months, a couple hundred applications, two interviews
r/MechanicalEngineering • u/PerspectiveNo794 • 9h ago
Why the 1982 Ghia et al. lid-driven cavity benchmark remains essential for verifying custom CFD codes
When building a 2D finite-volume CFD solver from scratch, verifying the incompressible NS implementation requires standard benchmark problems with reference data.
The 1982 Ghia et al. benchmark for lid-driven cavity flow is still the gold standard for checking velocity profiles along centrelines across various Reynolds numbers.
For anyone who has written their own fluid dynamics solvers: what edge cases or boundary condition bugs did you run into when trying to match Ghia et al. velocity profiles at higher Reynolds numbers (1000, 2000)?
r/MechanicalEngineering • u/Crazy_Pick_4430 • 19h ago
Mechanical Engineering Capstone Project Ideas
reddit.comr/MechanicalEngineering • u/Memelutron • 20h ago
GM Manufacturing Intern Inquiry
So I just received an offer for Manufacturing Intern: General Assembly based in Warren. Do y’all have any information on what to expect, how the overall experience is, and what exactly I’ll be working on? Thanks!
r/MechanicalEngineering • u/botokely69 • 11h ago
As a mechanical engineer, do you use an AI agent ?
I'm interested to know if some of you are using AI agents in your daily work and what kind of tasks you use them for
r/MechanicalEngineering • u/placeSun • 1d ago
How the NEW 2027 Volkswagen ID. Tiguan Is Made | Inside the Emden Factory
r/MechanicalEngineering • u/Excellent_Bus7460 • 1d ago
Mechanical Engineering student looking for a quick email interview with a working engineer
Hi everyone!
I'm a first-year Mechanical Engineering student at LaGuardia Community College, and I have an assignment for my First Year Seminar class where I need to interview an engineer. You can be currently working in the industry, military, retired, or a professor.
The interview consists of about 15 questions covering your education, career path, and day-to-day job responsibilities. Since we all have busy schedules, this can be completed entirely asynchronously via email, Reddit DM, or a Google Form—whatever is easiest for you.
r/MechanicalEngineering • u/mechpain • 13h ago
Vibe Modeling with local gpu
Hello,
I just wanted to share my project of creating a cadsoftware native for local agents
I write a prompt into my CAD software via the browser, and it is transmitted to Ollama, which uses the qwen3:8b model.
When the request is sent, the GPU can be seen activating.
I am only at the beginning, and it is clear that this will eventually be integrated into more well-known software.
What do you think about this ?
Are you afraid for you job?
How long do you think it might take for this to show up in well-known software?
Are we going to see a shift similar to the one we’ve seen among software developers?
Like, just talk to an agent and see what happens?
I would really like to hear your thoughts on this topic
r/MechanicalEngineering • u/Acceptable_Town_4074 • 1d ago
Which research to go with?
reddit.comr/MechanicalEngineering • u/isabella_sunrise • 2d ago
Mechanical Engineering Podcast Recs?
I recently became a big fan of the Decouple podcast which covers a lot of topics but has a focus on nuclear energy. This has made me hungry for more podcasts that go though mechanical engineering related topics. Any suggestions?
r/MechanicalEngineering • u/Raise3D_Technologies • 19h ago
What's your rule of thumb for switching from printing to machining or moulding?
For low-volume plastic parts I keep going back and forth on where the crossover sits. Printing wins on lead time and on geometry you can't machine, but once a part needs tight tolerances on mating faces or a consistent surface finish, machining starts to look better even at small quantities. Moulding only makes sense once the tooling cost is spread over enough parts. How do you decide? Is it a quantity threshold, or do tolerances or material certification push you off printing? Also, does anyone use printed parts as a bridge before committing to tooling, and how did you deal with the material behaviour differences between the printed and moulded versions?