r/Leatherworking • u/AnxiousDefinition246 • 1h ago
my little studio
my little studio in Eugene, Oregon
r/Leatherworking • u/AnxiousDefinition246 • 1h ago
my little studio in Eugene, Oregon
r/Leatherworking • u/Jaikarr • 2h ago
When u/DSLeatherGoods shared their Siren bag pattern a few months ago I had to give it a go.
The main selling point for crafters is that the bag can be made out of a single 1' x 2' panel of leather, and I can confirm that it's true! I picked up a panel of Badalassi Carlo Waxy veg tan from Rocky mountain to make this bag. I think that Waxy is severely underrepresented in the Leather subreddits. It has a great texture and pull up effect.
I did make one change to the pattern, instead of making the gusset a single piece I cut two slightly over length pieces (which still fits inside the panel) and had a go at doing a french seam for the first time.
Let me know what you think!
r/Leatherworking • u/Ok-Translator2253 • 6h ago
Hi y'all I thrifted a Wilson leather jacket that I love! It has some discoloration on the front panel that I was considering covering with some vintage patches that I recently found.
The problem is trying to figure out how to attach them when the lining is non-removable and there are several pockets in the opposite side of the discoloration.
I have some limited experience with sewing but not confident enough to remove the lining so I'm hesitant to sew. I looked a little into glue options but I'm not sure if I should just leave it alone.
Thanks for any advice!
r/Leatherworking • u/W01771M • 7h ago
I have no idea where to start, please help a beginner!
Of course to “start” it would be smaller projects and other items to practice but I don’t have any idea where to begin.
r/Leatherworking • u/MarkMathisen13 • 9h ago
My newest holster rig. Barb Wire theme this time. Cartridge loops fit .45 Colt (.45 Schofield, .45ACP). They will also fit .44 based cartridges.
Holster fits:
-1851/1861 Open Top revolvers.
-1873 SAA models.
-1875 Remington.
Adjustable hammer retention strap.
Belt is 3" width. Waist Size: 40" first hole/ 47" last hole.
*Crossed brown barbwire is leather cord, not sharp.
r/Leatherworking • u/hannah_time • 9h ago
Hi friends! Apologies in advance if this post isn't relevant for here. Uncertain which subreddit to post in. I'm using rivets and a rivets setter for the first time on a jacket of mine and have a question. Is the length on these rivets too long, causing them to inevitably come out? I'm hearing the "clicks" when I set them and they aren't bending when I hammer them, but do come out when I tug relatively forcefully. Wanted to ask since I need to buy more for the design and would rather know if a correction should be made before I do. TIA!
(For reference I am applying some pressure on the rivets to show the extra length when taking these photos)
r/Leatherworking • u/peachpropaganda • 11h ago
Hi! Just getting into leather craft and wanted to share one of my first projects, travel jewelry/watch cases. They’re imperfect, but I’m happy with how they turned out! I’d love some feedback. In particular, I had a bit of trouble setting my snaps straight. They seem to come out a bit misaligned, which makes the top three snaps look uneven.
I’m really enjoying leather craft and would love to start working up to larger projects like purses. Are there any especially helpful resources for building intuition around the fundamentals? For example, what types of leather and what finishes are best suited for certain projects? Any guidance would be appreciated! Thanks!
r/Leatherworking • u/BurtStanwinkle • 13h ago
I started leather crafting about a year ago and Ive accumulated a nice collection of panels. My father in law asked if I could make him a simple wallet or cardholder for Christmas. Hes a big Notre Dame fan and I dont have anything similar to their blue and gold colors. Do you have any suggestions so I dont have to buy and try this close to Christmas? Thanks
r/Leatherworking • u/CptDang • 18h ago
Beginner here!
First time making a tiny turn out bag.
I punched holes along one piece from the grain side before gluing it together, intending to run an awl to complete the hole through the other hole and the piping in between them (I thought that due to the thickness and curves, one side would end up having larger spacing between holes than the other). However now I am finding it very difficult to locate the pre-punched holes.
Could this situation be salvaged, and also what would be the proper methodology for something like this?
r/Leatherworking • u/Aristocrat-G • 21h ago
The cardholder is made of “crazy horse” leather. The button is adorned with a coin cap made from an authentic French coin.
r/Leatherworking • u/jewelzz2 • 1d ago
For those of you who have attended leather trade shows are the prices comparable to Black Friday? I "need" a few tools and to restock some veg tan leather. I'm going to Prescott next year and am wondering if I should wait to buy or hit Black Friday. TIA
r/Leatherworking • u/iditarods • 1d ago
Hey all! A newbie who has been lingering around for a bit here and I want to pull the trigger on some beginner stuff to start off. I ideally want to start off with easier things like - dog collars, leashes, wallets. Where is a good place to get some potential sales for Black Friday? Below is my list I’ve kind of been making for the items I want to get, how’s it look?
- Hole Punch tool
- Strap end cut tool
- Strap Cutter
- X acto
- Mallet
- Rivet Punch
- Rivet tool
- Rubber mat
- Edge beveler / slicker
- Wing divider
- Diamond chisel
- Sliving knife
r/Leatherworking • u/Shindi • 1d ago
r/Leatherworking • u/knvii • 1d ago
https://www.manamoon.com/collections/deck-boxes/products/aran-power-armor-dicewinder-x-deck-box
Hi guys I am wanting to make a leather box that is similar to this but just plain colours not any art on it. Does someone have any tutorials or like step by step to make something like this ?
I don’t have money to buy this directly but I have a lot of leather that was gifted to me so thought to make it as a fun project.
r/Leatherworking • u/p_byr • 1d ago
a circle pouch i made
full grain waxed cow belly, fully hand stitched
a circle cutout from the backside is stitched to the front
not my proudest work, but posting it anyway.
need tips on how to cut straight lines/ cleaner lines, currently using a big pair of scissors since i usually mess up with the pen knife
r/Leatherworking • u/alextimboston • 1d ago
I've just finished my biggest project yet, and i'm super happy with how this has turned out!
my fingers are complaining like hell! but it was definitely worth it.
Made out of some crazy horse leather, lined with green chrome tan biker leather for some softness, i'm hoping this will patina beautifully over time.
I may redo the patch in the middle and replace it with poppers so that i can change it as the mood strikes.
Credit to Vasile and Pavel for the pattern (no affiliation).
r/Leatherworking • u/New-Confusion4607 • 1d ago
Does anyone know what tool he is using here and what he’s using to paint it? I want to make a wallet with small details but I have no idea how to do so and how to color it. All recommendations are welcome! Thank you!
r/Leatherworking • u/SnooCheesecakes3985 • 1d ago
Made this leather tote bag for my wife’s MacBook Air. I added an internal utility pocket to keep the charger and other small essentials organized.
The design was also an opportunity to make use of smaller leather pieces, not quite scrap hides, but pieces that are a little too small for larger projects. I wanted to turn what might otherwise go unused into something practical and functional.
r/Leatherworking • u/Lowland_Infidel • 2d ago
I have been commissioned to do custom tooled leather toe caps for a pair of Hey Dudes. Im stuck on whether to use 4-6 oz or 6-8 oz. It won't be hardened or formed, nor colored. I plan on tooling the design, and marking a stitch line. I don't know if I want to punch small holes for lacing the piece into the shoe, or use pricking times to make holes for it to be sewn on.
Any advice?
r/Leatherworking • u/reddit_user_01000001 • 2d ago
What would cause this type of peeling on leather. It is bonded peeling? Is it repairable?
r/Leatherworking • u/Competitive-Ad2210 • 2d ago