r/Leatherworking
•
u/IllustriousTop7206
•
Oct 14 '26
Finished product Recent amputee, had to make work gloves work for me.
I altered the glove, sadly not making them from scratch yet.
r/Leatherworking
•
u/IllustriousTop7206
•
Oct 14 '26
I altered the glove, sadly not making them from scratch yet.
r/Leatherworking • u/Bitter_Winter_8627 • Jul 17 '26
I recently bought an old castle in Italy and I found this unusual leather bag.
There are no brand names, labels, maker’s marks, or stamps anywhere on it.
Its dimensions are approximately 45 × 30 × 5 cm.
The leather is quite dry and the stitching is worn in some areas, but it’s still structurally intact considering its age.
r/Leatherworking • u/SanguinarySword • Sep 13 '25
As the title says, the wife asked for this hat to go with a scarecrow costume she's putting together. So here it is. Pattern is from leatherhub. I used 4oz tobacco utility leather. Took quite a while to stitch together but I think it looks alright.
r/Leatherworking • u/cilantro-slut • Sep 05 '25
I made everything except for the bandolier and the belt with the bag. Credit to TheLARPPeddler for the pattern and awesome instructions - he made it very easy for a beginner like me to pick this up!! https://www.etsy.com/listing/1698231310/diy-leather-armor-pattern-female-witcher
r/Leatherworking • u/Pavelcraftleather • Jun 08 '26
I used my dad’s original backpack design as a basic blueprint for this project, but scaled the whole thing up significantly. The goal was to have one massive main compartment on the inside so it can just be packed tight with gear for the woods.
I mapped out and added all the outdoor utility features. It has a side pocket with adjustable buckled straps to fit different sized water bottles, an integrated slot to slip an axe handle into, and extra cinch straps on the top and bottom to carry a bedroll or blanket.
For the construction, the main body is a 1.4mm thick water-resilient leather that is heavily oiled and waxed, using two different tones of brown. The closure straps and the tips of the shoulder straps are made from a heavy-duty 4mm thick leather that I edge-burnished with wax. For the main part of the shoulder straps that actually sits on your body, I did a layered construction—the exterior is the thick leather, but the inside is the softer 1.4mm leather lined with a neoprene layer for comfort under heavy loads.
The back panel is also lined with neoprene, and the bag interior is fully lined with Pytex and pigskin. Pytex is a really tough material traditional to the footwear and boot industry here in Romania (made right near my hometown, Bucharest) so it gives it great structure.
I darkened the interior pigskin using a custom hand-mixed blend of carnauba and beeswax, then burnished it. For the edges I used Uniters edge paint. All the hardware is solid brass paired with quick-release Loxx fasteners for the main closures.
The entire pack is completely hand-stitched. I punched every single hole using a 1.5mm round hollow punch at roughly 5mm spacing, and stitched it all with 1mm waxed thread from Maine Thread Company.
It took me a ton of hours to pattern out the new scale from zero, prep the multi-layer linings, and finish the hand-assembly, but I am really happy about how it turned out.
I know canvas or technical synthetic textiles are usually the standard choice for modern wilderness packs, but that wasn't the goal here. This project was all about capturing a timeless, old-school aesthetic and creating an enduring piece of gear.
How do you guys like the look of it? Always happy to answer any questions about the build!
r/Leatherworking • u/SnooCheesecakes3985 • Jan 08 '25
r/Leatherworking
•
u/McNutts35
•
Nov 02 '25
I stumbled upon this man on tik tok and thought you all would appreciate this piece. I got permission from the creator to save and post it, an I am going to post the tik tok link so anyone who wants to check out more, can. Hope everyone enjoys. https://vt.tiktok.com/ZSyrfMrHo/
r/Leatherworking • u/Trirain • Apr 17 '25
Since the beginning of this year, I’ve been working on my cosplay of a dragon rider from the Empyrean series by Rebecca Yarros. I made the Freyja vest and Liv girdle (both by The War Factory), as well as the hip bag, goggles, and gloves — all patterns by Dieselpunk.ro. (I shared the goggles couple of weeks agoú
With help from my friend, who is a seamstress, we made some adjustments to both the vest and girdle to better fit my body shape.
This is my first time working with leather, and the learning curve has been steep. There are quite a few mistakes, but it definitely passes the "one-meter rule" ;).
r/Leatherworking • u/Majestic_Shock_8131 • Mar 20 '26
I based this model on the look of a traditional hunting bag (jagdtasche). This type of leather gear is time-tested and built for tough conditions; it’s highly durable and has no unnecessary details. As they say, everything old is new again. The client is happy with the result. What do you think of this style?
r/Leatherworking • u/Smooth_Bug_9868 • May 15 '25
r/Leatherworking • u/Pavelcraftleather • Sep 03 '26
After making several animal bags with my dad (stingray, shrimp, hammerhead shark, panda, cat), I wanted to try another animal design, but this time something completely different, so here is our take on a capybara bag.
It is fully handmade from vegetable tanned leather. I used a 6.5 oz / 2.5 mm veg tan for the body, dyed the muzzle darker and added the little ears and feet. What I’m really proud of as a design idea was making the D-rings resemble a capybara head. I also burned the little hair lines into the flap to add some texture and make it look a bit more realistic.
My dad and I worked together on the design and templates, and I digitized the pattern afterwards as well with making a youtube video on the build.
Let me know what you think of this one!
r/Leatherworking • u/Pavelcraftleather • Jun 19 '26
Wanted to share this build I finished a while ago. The main goal was to play with a deep emerald green patina, so I took some veg-tan and hand-dyed it with Fiebings Pro Dye before highlighting the structure with some high-contrast orange saddle stitching.
The shoulder straps are lined and reinforced for heavy use, and the back panel is constructed to keep its shape over time. I edge-dyed and burnished everything to get a clean, glossy finish that blends well with the dark tones of the leather. All the hardware is solid brass to match the warm tones of the thread.
I’d love to hear your thoughts on the color pairing and how the hand-dye turned out. Let me know if you have any questions about the patterns or the assembly process!
r/Leatherworking • u/[deleted] • Sep 19 '23
I’ve done some fabric sewing but it’s been a while. Never tried to sew leather. I tried to do it all on my own without any tutorials. Sewing leather is a completely different animal. And in my case a very ugly one lol
r/Leatherworking • u/Pavelcraftleather • Jul 25 '25
Hello again. I recently made with my dad Vasile a design for a sting ray bag and I really liked how it turned out and decided to try to make more marine life inspired bags so here is our take on a shrimp bag. I hope you like it. It is made from a thinner veg tan dyed with fiebings pro oil dye (yellow and red)
r/Leatherworking • u/Borrowed-Leather • Aug 08 '26
I just recently finished up creating this bag from my old pair of Vintage 90's Dr. Martens boots that I wore when I was a teenager. I'm not sure how I feel about it -- it's a little weird, no?🤣 Either way, I entered it into a contest for Unique Designs.
r/Leatherworking • u/Limowreck88 • Jun 22 '26
I didn't think 6 months ago that my curiosity would become such a passion, but here we are! Entering the hobby got me through one of the hardest periods of my life, and is now giving me a satisfaction in creating that I haven't felt in decades. I really love being able to make stuff people can use, and have gotten so much joy from gifting my projects to friends and family. Having only been a 2d artist all my life I didn't have much faith in my ability to make 3d objects, let alone sew, given how much I hated fabric sewing projects at school! But it turns out I just had to find the right medium. Thank you everyone in the leatherworking and leathercraft communities for the help and encouragement (even if I did upset some people not knowing the difference between leather paint and edge paint on this project, and didn't even know that edge dying is a thing😅).
This bag is Walpier Buttero in medium brown. The hardware is steel. I used a Tony See pattern chosen by the friend I made this for. I'll be interested to see how long my painted edges last 😂 please don't come for me I'm sensitive 😂
r/Leatherworking • u/Maleficent_Branch95 • Jan 16 '26
It’s been 3 years after I quit my job to focus myself entirely on leathercraft, I managed to rent a small plot where it was allowed to build your own studio.
So I did, I started off with 2 reefer shipping containers and I build everything myself from welding to woodwork. All from reclaimed materials.
I am super happy how things turned out so far,curious to know what you guys think ! Any improvement I could make / add ?
r/Leatherworking • u/Neremin • Feb 04 '25
r/Leatherworking • u/ResolutionFree3084 • Sep 02 '25
Made it for the renfaire so I could carry a few things and to have a place for mine and my wife's water bottles, go to stay hydrated, but he drink carriers are detachable if don't need them. I've been carrying it everyday.
r/Leatherworking • u/Zhurnaz • Jan 27 '24
Hi, I want to show you my second attempt at leather embossing, criticism is welcome🤝🏻
r/Leatherworking • u/busbikesandknitting • Aug 29 '25
I decided last minute that I needed a new outfit for the renfaire, and I wanted leather armor. Could I learn an entirely new skill and make a whole outfit in 3 days?
I wanted to make an armored leather chestplate for my D&D elf druid character. To start, I ordered 8oz C grade Veg Tan Leather (in case this was a disaster) from Weaver. Honestly the C grade leather was perfect for this application and a good deal for the price. I have worked with soft apparel grade leather before, but never 8oz thick veg tan.
Before cutting the leather, I made my pattern and then mocked it up in cardboard and tape to simulate the rigidity. When I was happy with the fit, I cut the leather out and boy was that a new challenge. It definitely took time and practice to figure out the best techniques to get smooth cuts.
I hemmed and hawed over whether I wanted to add stamping detail on this piece due to the time constraints. I really love how it turned out so I’m glad I took the extra time to add detail. Next up, I punched all the sewing holes, which took around 4 hours! Does it always take that long??
For the dye, I used fiebings low voc leather dye in light brown. The test piece I did with the dye came out so nice, but when I did the rest of the armor, it dried all splotchy! Panic ensued but after some more time drying outside, the color evened out. Phew!
In spite of the time crunch, I decided this outfit wouldn’t be complete without a belt, shoulder pauldrons and a linen skirt. So, I cut the belt out of a slightly lighter weight veg tan and repeated all the steps I did with the breast plate.
The morning we needed to leave for the faire, I quickly finished everything up and decided to sew the chest plate together in the car on the way there. Not the greatest plan since I get very carsick. Oops.
I’m actually fairly impressed that this was accomplished without any all nighters or any significant injuries.
TLDR tho, I think I’m in love with leatherworking now despite how hard it is on the hands. I’ve got plenty of material left over, what should I make next?
r/Leatherworking • u/SnooCheesecakes3985 • Jan 27 '25