r/IndustrialAutomation • • May 14 '26

The Bus factor - e.g. how to not destroy your stack in five minutes

0 Upvotes

This is one of those topics that is theoretical until it's not - and when you hit that "not" point, it all collapses. The idea behind the bus factor is a question - if your lead dev or architect gets hit by a bus, does the entire system fail? The bus doesn't have to be literal - sometimes the bus can be network connectivity, logistics, etc. But at the end of the day, whatever the bus is, the question is survivability.

This year we had a direct example of this in practice at Hannover Messe. I was originally slated to fly from SFO to Hannnover a few days before the event - but following the Lufthansa strikes, I found myself stranded in Japan, running a server of local devices for a demo literally half a world away.

It's really rare to have a direct real-world example of a highly theoretical problem - but as hard as it was, everything that happened around the strikes was super informative and proved out FlowFuse's ability to adapt and deploy resiliently.

I'm putting on a webinar all about this topic digging into the lessons learned, but the broad takeaways are:

- Document everything and assume nothing. If you are removed from the equation (or at least moved to the far outskirts), you need to be able to lean on documentation as a force multiplier. Because our demo was well-documented and because the build process was highly inclusive, when I had to activate local resources we weren't starting from zero. I can't tell you how important it is to have everyone on the same page when you're in an emergency situation.

- Use open tech. Proprietary systems are almost always going to have a tribal knowledge component, so when something goes wrong, you better hope the one person who knows your stack is there to work on it. Even if it's well-documented, closed and proprietary solutions means you're starting your climb out of the hole with the walls covered in spikes. Everything on our demo was open source and common tech - from MQTT to llama.cpp, we were leveraging open and public tech.

- Have a fallback. Our demo was built to be resilient across nodes and servers. Nothing only had one deployable asset, and all local resources had cached cloud resources to provide data and error reporting. Thankfully I was able to leverage my home internet in Japan to provide fibreoptic connectivity to run the server - but if there was yet another fail point, we were poised to make it a non-issue.

There's a bevvy of other lessons and takeaways that I'll share in the webinar - so if this sounds like a topic you're interested in, definitely register here. If you can't make it on the date, register anyhow and I'll send you a copy of the recording.


r/IndustrialAutomation • • Sep 18 '26

Would you consider replacing push-in terminal blocks with snap-in connection technology?

0 Upvotes

Hi everyone,

Full disclosure: I am a Sales Engineer at Shanghai Gkoncy Electric. Part of my role is to collect application feedback from panel builders and controls engineers and bring it directly to our product-development team.

Our engineering team is independently developing our own snap-in DIN-rail terminal block platform—not relabeling an existing product—and I would like practical feedback from people who specify, install, and maintain terminal blocks.

The basic idea is that the spring mechanism is held open before wiring. Inserting the stripped conductor triggers the clamp, creating the connection in one motion with clear audible, tactile, and visual confirmation.

Our current design targets and priorities are:

• Tool-free direct conductor insertion

• A conductor range from 2.5 to 10 mm²

• Stable contact pressure after repeated operation, vibration, and thermal cycling

• Clear insertion confirmation and straightforward release/rewiring

• Less ferrule preparation time where the conductor type and application standards allow

• A complete system of bridges, end plates, markers, and CAD/EPLAN data

We are still validating the design, including long-term spring behavior, temperature rise, pull-out strength, vibration resistance, and operating-cycle life. So I am not presenting these as finished or certified production results.

For those currently using push-in terminal blocks:

  1. Would you consider using snap-in technology?

  2. Would you consider replacing push-in with it on a new project or after a successful trial?

  3. What would we need to prove first—UL/cUL/TÜV certification, cycle-test data, pull-out and vibration results, temperature-rise data, identical footprint, local stock, price, accessories, or EPLAN/STEP files?

  4. What would concern you most—accidental triggering, spring life, conductor damage, release method, or added mechanism complexity?

This is product research, not a catalog or sales pitch. Honest criticism is welcome.


r/IndustrialAutomation • • 26d ago

Which automation components offer the best value?

0 Upvotes

I've got some end of year budget to upgrade a few automation components on our production line, but I'm trying to figure out where the money would actually make the biggest difference.

I'm looking at things like sensors, valves, actuators, and controllers. Obviously I can't upgrade everything, so I want to focus on what would actually improve reliability, reduce downtime, or save costs in the long run. I was recently pitched cobots, but I want to consider the whole picture.

If you had to pick, where would you put your money first? Any upgrades you've made that were really worth it? Or ones that turned out to be a waste?


r/IndustrialAutomation • • Aug 04 '26

Software engineer building an Industrial IoT edge gateway. Looking for a reality check.

Thumbnail
gallery
0 Upvotes

Hi r/IndustrialAutomation 👋

I'm a software engineer looking for a reality check on an Industrial IoT project I'm building.

A little about me first.

My background is in mobile and cloud software. Over the last few months I've been exploring industrial automation, and I've become completely fascinated by the space.

The idea is simple.

I want to make existing industrial machines IoT-enabled without modifying the machines themselves.

No PLC logic changes.

No production changes.

Just read machine data and make it available in the cloud.

The architecture I'm exploring looks something like this:

Machine → PLC → Edge Box → Cloud

The edge box sits on the same network as the PLC, periodically reads selected registers over Modbus TCP, and securely uploads the data.

That's it.

The box stays intentionally "dumb."

No business logic.
No machine-specific calculations.
No writes back to the PLC.

All the heavy lifting—analytics, dashboards, historical trends, predictive maintenance and eventually AI—happens in the cloud.

I'm currently experimenting with Delta PLCs, but my goal is to build something that works across multiple PLC vendors over time.

Before I go too far, I'd love to validate a few assumptions with people who work in this industry every day.

  • Is this a practical architecture for brownfield machines?

  • What challenges would I run into in real factories?

  • How much does communication differ across PLC vendors?

  • How often do customers actually allow third-party devices on their control networks?

  • If you were designing an edge gateway today, what would you do differently?

I'm not building this to sell a product tomorrow.

I'm building it because I genuinely enjoy learning about industrial automation, and I think it's a field I'd love to spend the rest of my career in.

I'm also hoping to learn from people who have been building these systems for years—and maybe make a few friends along the way.

I'm attaching a photo of one of the control panels I'm currently studying. I'd appreciate any observations or advice you have.

Thanks in advance!


r/IndustrialAutomation • • Oct 28 '25

Has anyone here used augmented reality to train frontline workers?

0 Upvotes

Has anyone used AR for frontline work instructions (maintenance, operations, training) in an industrial or enterprise setting? What was the biggest improvement you saw? Was it time-to-competency, error reduction, etc?


r/IndustrialAutomation • • Mar 01 '26

Question to industrial automation engineers!

0 Upvotes

I grduated master degree in industrial automation, i wanna know what jobs is available for this field ? and what i should i focus on specifically or what most required jobs in algeria and in the world


r/IndustrialAutomation • • Aug 15 '25

Exploring the Future of Collaboration Robots (Cobots) in Industrial Automation

0 Upvotes

Lately, I've been reading up on collaborative robots, or corbots, and their potential to transform industrial automation is facinating. Unlike traditional industrial robots that require isolation and safety cages, cobots are designed to work safely alongside humans, opening up new possibilities for efficient and flexibility.

With advancement in AI, machine learning, and sensor technology, these robots are starting to handle more complex tasks. They could take over repetitive work, support operators or precision task, and even adapt to changes in real time.

I'm particularly interested in how cobots might reshape the workforce. Will they complement humans skills, or will industries need to rethink training and job roles entirely? Safety is another exciting area, modern cobots come with advanced sensors that can detect humans instantly, which could refine what "safe automation" looks like.

It feels like we're at the beginning if a shift where humane and robots collaborate more naturally. I'd love to hear from others: how do you see cobots impacting manufacturing in the next 5 - 10 years? Are there specific applications where you think they'll make the biggest difference.

Leave your idea...


r/IndustrialAutomation • • Feb 12 '26

OT backup question: why are these systems being missed?

Post image
2 Upvotes

we recently did some research with manufacturers across UK, Canada, US about backup and recovery. One of the things that came out from it was that 46% said they’re not backing up OT / ICS / SCADA systems. I just wondered for those working in the industry, with the growing pressure around downtime etc, why is this the case? What's the main blocker or reasoning?

- thanks, brooke


r/IndustrialAutomation • • Aug 27 '25

Bringing legacy PLCs into modern IoT environments - how do you do it?

2 Upvotes

Hi all,

A lot of facilities still run legacy PLC that don't "speak" modern protocols easily. I've seen Intergrations either:

  • Add protocol converters

  • Use middleware like Kepware or Ignition

  • Deploy IoT/edge controllers as gateway

With the push toward OPC UA over TSN, secure MQTT brokers (HiveMQ, Azure IoT, AWS IoT Core), and REST API's the gap feels wider than ever.

Has anyone here tried mixing PLCs with edge controllers that natively support MQTT/Modbus? REST? Something like NORVI's industrial controllers could sit between legacy PLCs and the cloud - handling both data translation and cybersecurity (tunneling, authentication, zero-trust)

What's your take in 2025? Better to retrofit, replace or extend?


r/IndustrialAutomation • • Oct 08 '26

I made an Android app for Electric panel designing, Feedback and reviews appreciated

0 Upvotes

I’ve been working on an Android app for electrical panel designing and it has reached around 10k users, but I haven’t received as much feedback as I expected.

I’d like to hear from people who actually work with electrical panels and see how useful they find it in practice. If you’ve used it, I’d really appreciate hearing what you think and, if you find it useful, leaving a good review on the Play Store as well.

If you find this app useful for yourself and need more features included of your choice, I would really appreciate if you reach out with those requests to me.

Any suggestions for making it more useful are welcome.

app link: Electrical Panel Layout & CAD


r/IndustrialAutomation • • Oct 11 '25

Jobs in pharmaceutical industry on Automation and control system

0 Upvotes

What are the jobs are there on Automation and control systems engineering in pharmaceutical industries like Aurobindo, hetoro and Mylan such companies hire for field/on site job.


r/IndustrialAutomation • • Jun 03 '26

How big an issue is local network access for provisioning?

0 Upvotes

This is a market research question.

My understanding from several people in the OT/ICS world is that there is a lot of equipment that requires a layer 2 network connection during initial provisioning and potentially reprovisioning or replacement. Said requirement often means that an engineer has to travel to a facility they might not work at normally, and it is tedious to gain access to the subnet regardless, especially as more segmentation occurs to improve overall security.

What I'd like to know is how much equipment really falls into this category? How big of a pain point is it? Are there good remote solutions available, and if so, from who?


r/IndustrialAutomation • • Aug 14 '24

Winch Load Pin

0 Upvotes

Need you guys advice for load pin .

I intend to purchase and install a load pin for my winch , but no idea where shall I place it. Can I ask for some advices from you guys.

Thanks in advance


r/IndustrialAutomation • • Nov 09 '24

Hi guys. I wonder if we have yet any AI models to convert FDS into PLC code?

0 Upvotes

r/IndustrialAutomation • • Feb 16 '26

[Prototype] I created a Non-Invasive "Analog-to-MQTT" Gateway for Legacy Machines Meters using Python & OpenCV

Post image
0 Upvotes

Here is how the workflow works (as seen in the video):

1. The Calibration Phase (The UI)

  • You freeze the video frame.

  • Input: Min, Max angles and correct Center of the dial.

  • Input the real-world values (e.g., 0 to 120 °C).

  • The system calculates the geometry and saves the config.

2. The Runtime Phase The script runs in a loop (lightweight enough for a Raspberry Pi). It isolates the needle using color/contrast masking and calculates the angle vector relative to the calibrated scale.

3. The Output (Integration) Instead of just displaying the value on a screen, it acts as an IoT Gateway. It generates a JSON payload containing the timestamp, sensor ID, and value. In this demo, I’m sending the data via MQTT directly to Home Assistant, but it can easily be piped into Node-RED, InfluxDB, or a SCADA system that supports MQTT/Rest API.


r/IndustrialAutomation • • Apr 12 '25

How'd I do?

Thumbnail
gallery
3 Upvotes

Second bit a kit I've done. Please feel free to roast me.


r/IndustrialAutomation • • Apr 06 '25

Any full remote work or higher paying jobs in industrial automation?

2 Upvotes

I have a brother who works as a contract programmer in Europe and does the digital nomad lifestyle, so he doesn't pay taxes. 50k gross salary? That goes straight into his pocket. On the other hand, I got a job offer for a higher gross, but net it ended up being 35k, in addition to the higher COL etc etc.

I just get frustrated by this situation. If I want to earn 50k gross, I have to ask for 80k, and that usually means a hell of a lot of responsibility and longer hours. I've been looking for remote opportunities, but can't seem to find any. Contracting seems to be like the only way out in our field, IF the opportunity presents itself and IF it doesn't fall through.

Is this really it? Did I get the short end of the stick here or what am I missing? Like are there any sweet sweet gigs in our field that would enable us to make more money in less time? Because all I've seen so far are long hours and a lot of responsibility for a bit higher pay than other professionals.


r/IndustrialAutomation • • Aug 21 '26

How to Become a PLC Programmer with No PLC Experience?

2 Upvotes

I would appreciate your opinion on how to transition into a PLC Programmer role, with the long-term goal of becoming an Automation Engineer. I have recently completed a Master's degree in Faculty of Energy Technology, but I currently have little to no practical experience with PLC programming, electrical schematics, etc.

What would you recommend as the best first step?


r/IndustrialAutomation • • 5d ago

Do we still need low-code/no-code tools if we can just vibe code our own production dashboards?

0 Upvotes

I attended a talk at FABTECH in Las Vegas a few weeks ago about vibe coding, and I've been thinking about it ever since.

We have several Siemens machines in our production and run 3 shifts. I'd like to build a dashboard that shows machine status, production numbers, downtime, and maybe some OEE metrics.

With all the AI coding tools available today, I'm wondering why I would still need a low-code or no-code platform for that?

Building the dashboard itself seems pretty easy. But what about connecting it to our Siemens PLCs? Can AI actually handle the connectivity, data collection, and everything behind it?

We also run production 24/7, so the dashboard would need to work reliably across all three shifts, track historical data, and handle connection issues.

Has anyone here actually vibe coded a production dashboard and connected it to Siemens machines?

Is this realistic without much programming experience, or would you still go with an established low-code/no-code solution?


r/IndustrialAutomation • • Feb 05 '25

suggest some raspberry pi projects that use control system

3 Upvotes

So i am an Electronics and telecommunication engineering student and i have to make a good project using Raspberry pi. I am bored with Arduino and esp suggest some great projects that i can make and it should include some concepts of control systems


r/IndustrialAutomation • • May 19 '25

Question about integrating with multiple PLC brands

1 Upvotes

Hi everyone — I’m working on a project that needs to interface with different PLCs across a facility (Siemens, Rockwell, Mitsubishi, etc.), and I’m trying to wrap my head around how integration typically works in these mixed environments.

Some questions I’m wondering about:

  • Are there industry standards (like OPC UA or MQTT) that most systems rely on?

  • Do most integrators build custom drivers or connectors per brand?

  • How do you manage data mapping, tag naming differences, or timing issues between systems?

Would love to hear how others have handled this — tools you use, lessons learned, or best practices.

Thanks in advance! 🙏


r/IndustrialAutomation • • Oct 29 '25

How Do Industry Professionals Handle Project Development Workflow?

Thumbnail reddit.com
1 Upvotes

r/IndustrialAutomation • • May 23 '26

Can someone from Proposal Engineering transition into Industrial IoT?Anyone switched from Core Engineering to Industrial IoT? Need guidance

0 Upvotes

Hi everyone,

I’m from a Chemical Engineering background and currently working in Proposal Engineering. My work gives me exposure to process-related projects, technical documentation, and industrial systems.

Recently I’ve been exploring a transition into Industrial IoT / Industry 4.0 because I noticed people from process engineering, manufacturing, reliability, and industrial operations moving into digitalization and industrial analytics roles.

I wanted to ask people already working in this field:

  1. Is Industrial IoT a good transition from Proposal Engineering + Chemical Engineering?

  2. What entry roles should I target first? (Industrial Data Analyst, Digitalization Engineer, Process Analyst, Industrial IoT Engineer, etc.)

  3. Which skills should I prioritize first? (SQL, Power BI, Python, PLC/SCADA, AVEVA PI?)

  4. How difficult is the switch for someone without a software background?

  5. Are there fresher/junior opportunities or internships in this space?

  6. Would you recommend service companies or product companies for entering this field?

My long-term goal is to work in industrial digitalization / smart manufacturing rather than becoming a pure software developer.

Would really appreciate hearing from people who made a similar transition or currently work in Industrial IoT.

Thanks!


r/IndustrialAutomation • • Jul 26 '24

Automated motor speed controller question

1 Upvotes

I have a large ducted vent fan with a 120V single phase 60hz AC motor serving two bathrooms. Motorized dampers open and close the ducts in each bathroom depending on which switch is on. I would like the fan to run at half speed when either one of the switches is on and at full speed when both switches are on. Can anyone think of a control strategy that would accomplish this goal?


r/IndustrialAutomation • • Oct 14 '24

Reverse direction detect on an encoder

1 Upvotes

It seems like I maybe need to implement logic to achieve what I am trying to do, but I figured I run it by this sub and get some other opinions.

I am using a Model 716 Accu-Coder and I just want to check for reverse motion, I dont care about speed. I know I could monitor the A B A' B' pulse patterns with logic and determine this, but is it possible without logic? System does not have a plc, and if I dont have to add one it would be easiest. If I do, I'll probably just throw something cheap (arduino) at it as this is a redundant safety anyways.