r/HomeNetworking • u/throwRA_4879593 • 11h ago
r/HomeNetworking • u/tellmewhy12 • 8h ago
Advice Using UniFi hardware for my set up. This is my shopping cart. Is there a better place to purchase from to save a bit of money?
Is now a bad time to buy? Does UI usually offer black friday deals?
Or do you guys usually purchase hardware through a middle man or something for the best deals? I have a Microcenter near me but i've never seen UI hardware discounted before but I dunno! Any help would be nice please. Thanks
r/HomeNetworking • u/jamgood96 • 8h ago
Network Closet Patch Panel
Hi friends, we moved into this house a bit over a year ago and the only networking done was some grossly ran patch cables to each room up through the baseboard, with a switch near the exterior wall in the kitchen. I’ve since run proper cables to wall mounted keystones in various rooms, and centralized everything in the under stair closet in the middle of the house, along with where the water heater is. I’m happy enough with the patch panel, but I’d love to make it a bit more robust, especially given how low it’s mounted and how vulnerable it is to snagging cables. Any ideas? It’s possible an in wall solution would work, since it’s a 2x4 cavity. Currently all cables in the wall to down into the crawlspace. The bays where the plywood is mounted is because the fridge is pushed literally all the way up to the backside of the drywall. Don’t ask. 😐
r/HomeNetworking • u/No-Charge706 • 3h ago
Idiot needs help with failover
Hi everyone,
To put this upfront, I’m an idiot in home networking and know next to nothing. That being said, I’m savvy enough to get most things pretty quick.
With that being said, I’m getting an additional ISP here in the next couple weeks. My first one is a 1gig spectrum (coaxial) line. The second line is going to be a 5gig T-Mobile fiber line (was supposed to be a 2gig line but they added the 5g option last week). I had bought an OMADA ER707-M2 to set up both lines to do a failover, but I see the er707 only has 2.5g ports.
What’s a good option to go with that’ll be able to utilize the speed fully? And do I have this order right?
The two modems will plug into the ER707 (or the 5g-10g router alternative) and then I can plug an eero pro 7 mesh router into that and have both ISP lines through the eero?
I would go with an access point setup, but I’m not currently looking at hardwiring my entire house with cables.
Any help is appreciated!
r/HomeNetworking • u/I_am_chicken • 13h ago
Advice Some questions about ethernet cables in regards to setting up a KVM extender.
So I'm trying to get my basement PC connected to my living room TV. There already exists an Ethernet access port that can run an Ethernet connection from our router upstairs to downstairs. (First image is the upstairs connection and the second image is that connection running into my basement I know its janky previous home owner did it) Currently, that is plugged into my PC for the internet. I'm now needing an additional connection in order to link the transmitter and receiver of this KVM set.
Could I theoretically use 2 Ethernet splitters to avoid having to buy and run a new Ethernet cable to connect the KVM set? I would plan to have a splitter upstairs, using the existing upstairs cable that is currently plugged into my modem, I'd unplug that from the modem, put it in a splitter which would then run from Modem to KVM receiver.
Then downstairs I'd unplug from my computer, plug that into a splitter which would then connect to the transmitter and computer.
First time trying to DIY something like this so please let me know if this would be feasible, and if not i guess I'm gonna learn how to fit another cable connection through that upstairs port in my wall lol.
r/HomeNetworking • u/dmontg • 8h ago
MoCA noob , please critique my plan
Working on a MoCA connection from the Xfinity router to my basement two floors down. Please critique this sketch, suggestions are welcome!
r/HomeNetworking • u/AggressiveAd8611 • 10h ago
Mesh or Access points
Good afternoon! I need some advise. I recently purchased some deco 7 units from Costco. We are still having issues where a deco will turn red (no WiFi) and then within a few minutes come back online.
After reading reviews looks like you can get a good nine or junk one….. so it can easily go back.
Here is the question: 4 module ubiquity mess. Or. WiFi access points across the house with mainly cat 5.
Thanks!!!!
r/HomeNetworking • u/Ardbert_The_Fallen • 6h ago
Unsolved Best way to handle connecting to home VPN when using same subnet
Had a situation this weekend where I thought I could not access certain devices on my home network after connecting on my VPN. My wake on LAN was being unresponsive and I could not access endpoints that are usually online.
I ended up realizing it was the first time I connected VPN while on a WiFi at a friend's house, who also used a 192.168.x.x subnet range.
I am almost positive this was the cause of the inability to access endpoints, as dropping from their WiFi and reconnecting over VPN, I could hit the endpoints immediately. So, I was wondering what the best way to handle this is? I'd say I could simply change to another private network space, but eventually I'll be on another network and perhaps experience it there as well.
Or I could be completely wrong as to why the endpoints were not responding.
Just looking for some advice, thanks!
r/HomeNetworking • u/jxsilicon9 • 6h ago
Should I get two Omada AP and use Deco as router?
reddit.comr/HomeNetworking • u/tittytwister1 • 6h ago
Unsolved Possessed Internet Connection?
My connection to the internet seems to get actively pushed down, its the weirdest thing Ive also never seen it do that before ever in my life. What could possibly be occurring here?
It starts off high and it looks like it actively gets pushed down to 1 megabit a second.
Thank you for your time
r/HomeNetworking • u/Harrison88 • 19h ago
Advice 6 GHz worth it?
Having WiFi range issues with my current TP Link AX55 not reaching the master bedroom. In true form, instead of just buying a TP Link extender I’ve decided to look at a UniFi WiFi 7 setup.
I’m stuck between 2x U7 Lites or spending almost double for a UniFi AP with 6GHz functionality.
There does seem to be a fair bit of congestion locally (semi detached house with neighbours very close by), but hoping the two AP will overcome that. Can provide a channel report if that helps.
Side note: Cloud Gateway Ultra + AP or Express 7? 👀
r/HomeNetworking • u/Odd-Appointment9762 • 6h ago
Advice Time to retire Linksys mesh setup, had the orbi before. 1gig fiber is poorly located at far end of house. Any advice on new system to cover two floors <3k sq ft. Nothing normally last more than two years, is that common?
Router advice please.
r/HomeNetworking • u/WirevoPro • 6h ago
Advice What do you use to see everything that’s connected to your home network?
Hi all,
I work in IT, and I still find it hard to get a clear picture of what’s on my own home network. Between phones, TVs, smart bulbs, cameras and guests’ devices, the list keeps growing.
I’ve tried a few scanners and my router’s device list, but none of them do everything I want. Ideally I’d like to:
See each device with a proper name
Know when something new joins or drops off
See which ports and services are open
Keep a history of my speed tests
What do you use, and what’s missing from it?
r/HomeNetworking • u/Some_Random_Nick_173 • 7h ago
Advice Router upgrade suggestions
Hi everyone,
I know there have already been a few posts from people asking for help with this, but now I'm looking for some advice as well.
Right now I am using a single Xiaomi Mesh System AX3000 (the old model, not the NE version), and I'm thinking about upgrading. It is no longer supported by the manufacturer, and I've been experiencing constant network speed issues on both the 2.4 GHz and 5 GHz bands. I have a 1 Gbps internet connection, but on the ground floor, I can't get more than 200 Mbps over 5 GHz Wi-Fi (even less on 2.4 GHz).
I live in a small, two-floor house (60 m2 in total). I have a wired connection on the upper floor, but no Ethernet connection on the ground floor. I cannot run any cables to the ground floor because I do not own the house (rented). The floors are made of concrete and I believe having a mesh system is overkill for a house of this size. Only have my PC is connected via Ethernet, everything else uses Wi-Fi. I'm looking to upgrade to something reliable, secure, and future-proof, so that I can make the most of it when I move to another place or upgrade my internet connection in the future.
I've been reading other posts here and looking at online recommendations, and I've narrowed down my options to the following: ASUS RT-BE92U, ASUS RT-BE88U, UniFi Express 7, UniFi Dream Router 7. Would you recommend any of these? Or is there another option you think would be a better fit?
Thanks in advance for your help!
r/HomeNetworking • u/Character_Artist7192 • 7h ago
Help picking a switch for a Ubiquiti U7 Express 2-pack - Pro Max 16 PoE vs Omada 16-port 2.5G vs Flex 2.5G + PoE combo?
reddit.comr/HomeNetworking • u/JeffKnapman • 1d ago
Help with Ethernet port activation
Hello, just wondering if anyone can help out an inexperienced individual with activating an ethernet wall port. Doing a little research online but would prefer some guidance with the photo provided
r/HomeNetworking • u/Synrox • 11h ago
Advice Home network upgrade for parents
Hey everyone,
I’m looking to expand and clean up my parents current home network, and I’d like to get your opinions and recommendations before pulling the trigger on new gear.
Current Setup:
Right now, its Frankensteined together with random Wi-Fi routers, unmanaged switches, and a Reolink NVR with a few cameras. Everything works, mostly, but the Wi-Fi has dead zones.
The house is old, brick, and has 3 floors. 1Gbit speeds.
My first thought was to just buy a mesh set and call it a day, however if I do this then I'll be on the hook for ALL the tech support. If I'm going to be the support, I guess I need to think more long term.
My home setup is Ubiquity based, however budget is... constrained.
My question is, how to upgrade the network and add at least 3 APs and have it be on a controller of somekind, for a "reasonable" price?
r/HomeNetworking • u/Dangerous-Guava2232 • 12h ago
Unsolved Powerline adapter help
So I have a PC on the bottom floor in my house and the router is on the top floor, I also cant Drill a hole/ have a long ethernet cable because the stairs to the top floor are outside. The House runs on the same electrical system and everything is connected so i guess the powerline adapters will work. I just need like 100Mbps and thats about it. Will the powerline adapters be a Good choice or do i have some other one?
r/HomeNetworking • u/F0rkAroundFindOut • 8h ago
How do you pick a DOCSIS 3.1 modem?
My modem is EOL and DOCSIS 3.0 anyway ~500 mbps plan. Looking to update and future proof. Got choices down to Arris S34, Hitron CODA56, Netgear CM3000. I understand these are high-split and that Unifi's modem may not be as great.
I'm seeing a range of prices on these. Are there advantages in reliability, long-term support or otherwise that I justify the extra cost?
CODA56: $180
Arris S34: $250
CM3000: $300
EDIT: Sorry for not clarifying. My ISP is Xfinity. All of these are on the recommended list
r/HomeNetworking • u/Ecstatic_Hovercraft1 • 8h ago
Advice Network Cabinet outside?
reddit.comr/HomeNetworking • u/Lerimin • 12h ago
Advice MoCa 2.5 help Request
Hello! Feeling like an absolute noob here. I promise I did go through the FAQ regarding MoCa, I may just be challenged. I'm seemingly unable to successfully figure out this MoCa 2.5 setup. I have 2 converters and 2 splitters. I made a mock-up of my situation, which mirrors my technical ability clearly. Clearly I am not putting the MoCa adapters in the right place in my new home, and would appreciate some guidance from you all. Xfinity came out for my inability to figure this out, but on site told me they didn't know what MoCa was. The goal here is to get ethernet in the second floor office. Thank you all, excited to learn more!
Additional info: my modem/router is a Netgear AC1900 WiFi Cable Modem Router Model C7000v2 and the internet is not fiber.
r/HomeNetworking • u/Emotional_Total_1242 • 9h ago
UDR7 or GL.iNet GL-BE6500 Flint 3e
Hey,
I'm looking into getting a new replacement for my ISP's router. From what I searched around these two seem like a good option for what they offer and they're value (UDR7 ~300 euros, Flint ~188 euros).
The differences that jump out at me are the 10 gig port on UDR7 and the fact that the Flint is based on OpenWRT.
Regarding UDR7's 10 gig port, my upstream connection with the ISP is only 1 GB/s at the moment, so that's not a big plus (even if I upgraded). I don't have a major use for 10 gig on LAN as well, since I'd need to get a switch for it.
I value owning what we buy, and know that Flint one is based on a fork of OpenWRT (but I don't know if that means that I could flash the vanilla OpenWRT as well), but I also don't feel like tinkering all the time with the router and want something that's well supported in the coming years.
So, is it worth the extra money and go with UDR7, even if it's more closed, but might be a more refined experience, or is Flint's OpenWRT fork reliable and robust, allowing me to flash it with vanilla in case support stops from GL.iNet?
Thanks!