r/HomeNetworking • • 3h ago

Idiot needs help with failover

2 Upvotes

Hi everyone,

To put this upfront, I’m an idiot in home networking and know next to nothing. That being said, I’m savvy enough to get most things pretty quick.

With that being said, I’m getting an additional ISP here in the next couple weeks. My first one is a 1gig spectrum (coaxial) line. The second line is going to be a 5gig T-Mobile fiber line (was supposed to be a 2gig line but they added the 5g option last week). I had bought an OMADA ER707-M2 to set up both lines to do a failover, but I see the er707 only has 2.5g ports.

What’s a good option to go with that’ll be able to utilize the speed fully? And do I have this order right?

The two modems will plug into the ER707 (or the 5g-10g router alternative) and then I can plug an eero pro 7 mesh router into that and have both ISP lines through the eero?

I would go with an access point setup, but I’m not currently looking at hardwiring my entire house with cables.

Any help is appreciated!


r/HomeNetworking • • 6h ago

Unsolved Best way to handle connecting to home VPN when using same subnet

1 Upvotes

Had a situation this weekend where I thought I could not access certain devices on my home network after connecting on my VPN. My wake on LAN was being unresponsive and I could not access endpoints that are usually online.

I ended up realizing it was the first time I connected VPN while on a WiFi at a friend's house, who also used a 192.168.x.x subnet range.

I am almost positive this was the cause of the inability to access endpoints, as dropping from their WiFi and reconnecting over VPN, I could hit the endpoints immediately. So, I was wondering what the best way to handle this is? I'd say I could simply change to another private network space, but eventually I'll be on another network and perhaps experience it there as well.

Or I could be completely wrong as to why the endpoints were not responding.

Just looking for some advice, thanks!


r/HomeNetworking • • 6h ago

Should I get two Omada AP and use Deco as router?

Thumbnail reddit.com
1 Upvotes

r/HomeNetworking • • 6h ago

Unsolved Possessed Internet Connection?

Post image
0 Upvotes

My connection to the internet seems to get actively pushed down, its the weirdest thing Ive also never seen it do that before ever in my life. What could possibly be occurring here?

It starts off high and it looks like it actively gets pushed down to 1 megabit a second.

Thank you for your time


r/HomeNetworking • • 6h ago

Advice Time to retire Linksys mesh setup, had the orbi before. 1gig fiber is poorly located at far end of house. Any advice on new system to cover two floors <3k sq ft. Nothing normally last more than two years, is that common?

1 Upvotes

Router advice please.


r/HomeNetworking • • 6h ago

Unsolved qBittorrent hit ~266 Mbps on a 100/30 plan, but Speedtest right after showed 100/30. How?

0 Upvotes

My ISP plan is 100 Mbps down / 30 Mbps up. Today I downloaded a 7.94 GB torrent in qBittorrent at around 5 in the morning, and something strange happened:

  • qBittorrent showed roughly 25-33 MB/s (200-266 Mbps) for the whole download, not just a short spike.

  • My system monitor showed the same ~200-266 Mbps.

  • The download finished in about 4-5 minutes. At 100 Mbps it should have taken 10-11 minutes, so the timing matches the higher speed.

  • I ran Speedtest immediately after it finished and got 100 down / 30 up, exactly my plan.

What could it be?

Setup:

  • ISP: Videotron (Canada)

  • Connected via: Wi-Fi

  • OS: Linux

  • VPN: No (100% sure)

  • Proxy: No (100% sure)


r/HomeNetworking • • 6h ago

Advice What do you use to see everything that’s connected to your home network?

1 Upvotes

Hi all,

I work in IT, and I still find it hard to get a clear picture of what’s on my own home network. Between phones, TVs, smart bulbs, cameras and guests’ devices, the list keeps growing.

I’ve tried a few scanners and my router’s device list, but none of them do everything I want. Ideally I’d like to:

  • See each device with a proper name

  • Know when something new joins or drops off

  • See which ports and services are open

  • Keep a history of my speed tests

What do you use, and what’s missing from it?


r/HomeNetworking • • 7h ago

Advice Router upgrade suggestions

0 Upvotes

Hi everyone,

I know there have already been a few posts from people asking for help with this, but now I'm looking for some advice as well.

Right now I am using a single Xiaomi Mesh System AX3000 (the old model, not the NE version), and I'm thinking about upgrading. It is no longer supported by the manufacturer, and I've been experiencing constant network speed issues on both the 2.4 GHz and 5 GHz bands. I have a 1 Gbps internet connection, but on the ground floor, I can't get more than 200 Mbps over 5 GHz Wi-Fi (even less on 2.4 GHz).

I live in a small, two-floor house (60 m2 in total). I have a wired connection on the upper floor, but no Ethernet connection on the ground floor. I cannot run any cables to the ground floor because I do not own the house (rented). The floors are made of concrete and I believe having a mesh system is overkill for a house of this size. Only have my PC is connected via Ethernet, everything else uses Wi-Fi. I'm looking to upgrade to something reliable, secure, and future-proof, so that I can make the most of it when I move to another place or upgrade my internet connection in the future.

I've been reading other posts here and looking at online recommendations, and I've narrowed down my options to the following: ASUS RT-BE92U, ASUS RT-BE88U, UniFi Express 7, UniFi Dream Router 7. Would you recommend any of these? Or is there another option you think would be a better fit?

Thanks in advance for your help!


r/HomeNetworking • • 7h ago

Help picking a switch for a Ubiquiti U7 Express 2-pack - Pro Max 16 PoE vs Omada 16-port 2.5G vs Flex 2.5G + PoE combo?

Thumbnail reddit.com
0 Upvotes

r/HomeNetworking • • 7h ago

I have zero WiFi or tech knowledge please help!

0 Upvotes

Hello! I’m living with a family friend for a while and the WiFi router is in her bedroom and doesn’t reach my bedroom at the other end of the house. It doesn’t even reach the hallway down my section of the house so there no WiFi in the library or bathroom either. I got a little WPS WiFi extender off Amazon but in order for it to work it has to be close enough to WiFi router to get signal. This means it’s all the way down at the end of the hallways so the signal barely reaches my room! What do I do I’m running out of data


r/HomeNetworking • • 8h ago

Advice Using UniFi hardware for my set up. This is my shopping cart. Is there a better place to purchase from to save a bit of money?

Post image
52 Upvotes

Is now a bad time to buy? Does UI usually offer black friday deals?

Or do you guys usually purchase hardware through a middle man or something for the best deals? I have a Microcenter near me but i've never seen UI hardware discounted before but I dunno! Any help would be nice please. Thanks


r/HomeNetworking • • 8h ago

Network Closet Patch Panel

Thumbnail
gallery
36 Upvotes

Hi friends, we moved into this house a bit over a year ago and the only networking done was some grossly ran patch cables to each room up through the baseboard, with a switch near the exterior wall in the kitchen. I’ve since run proper cables to wall mounted keystones in various rooms, and centralized everything in the under stair closet in the middle of the house, along with where the water heater is. I’m happy enough with the patch panel, but I’d love to make it a bit more robust, especially given how low it’s mounted and how vulnerable it is to snagging cables. Any ideas? It’s possible an in wall solution would work, since it’s a 2x4 cavity. Currently all cables in the wall to down into the crawlspace. The bays where the plywood is mounted is because the fridge is pushed literally all the way up to the backside of the drywall. Don’t ask. 😐


r/HomeNetworking • • 8h ago

How do you pick a DOCSIS 3.1 modem?

1 Upvotes

My modem is EOL and DOCSIS 3.0 anyway ~500 mbps plan. Looking to update and future proof. Got choices down to Arris S34, Hitron CODA56, Netgear CM3000. I understand these are high-split and that Unifi's modem may not be as great.

I'm seeing a range of prices on these. Are there advantages in reliability, long-term support or otherwise that I justify the extra cost?

CODA56: $180

Arris S34: $250

CM3000: $300

EDIT: Sorry for not clarifying. My ISP is Xfinity. All of these are on the recommended list


r/HomeNetworking • • 8h ago

Orange vs gold se

Thumbnail reddit.com
1 Upvotes

r/HomeNetworking • • 8h ago

Advice Network Cabinet outside?

Thumbnail reddit.com
1 Upvotes

r/HomeNetworking • • 8h ago

MoCA noob , please critique my plan

Post image
3 Upvotes

Working on a MoCA connection from the Xfinity router to my basement two floors down. Please critique this sketch, suggestions are welcome!


r/HomeNetworking • • 9h ago

UDR7 or GL.iNet GL-BE6500 Flint 3e

1 Upvotes

Hey,

I'm looking into getting a new replacement for my ISP's router. From what I searched around these two seem like a good option for what they offer and they're value (UDR7 ~300 euros, Flint ~188 euros).

The differences that jump out at me are the 10 gig port on UDR7 and the fact that the Flint is based on OpenWRT.

Regarding UDR7's 10 gig port, my upstream connection with the ISP is only 1 GB/s at the moment, so that's not a big plus (even if I upgraded). I don't have a major use for 10 gig on LAN as well, since I'd need to get a switch for it.

I value owning what we buy, and know that Flint one is based on a fork of OpenWRT (but I don't know if that means that I could flash the vanilla OpenWRT as well), but I also don't feel like tinkering all the time with the router and want something that's well supported in the coming years.

So, is it worth the extra money and go with UDR7, even if it's more closed, but might be a more refined experience, or is Flint's OpenWRT fork reliable and robust, allowing me to flash it with vanilla in case support stops from GL.iNet?

Thanks!


r/HomeNetworking • • 9h ago

Moca adapters and Ethernet and me

0 Upvotes

Hey y’all. I have a coaxial cable in my room that I want to turn into an Ethernet cable and saw that I could do that via a moca adapter. I don’t know even the first thing about networking unfortunately so I don’t really know what I need to do for it. We got internet in the house but no real way for me to get access to it from my room it’s too far. Is it as easy as getting a moca adapter and that’s it?


r/HomeNetworking • • 10h ago

Severe bufferbloat spikes while gaming (EA FC 27) on a US condo - looking for advice

0 Upvotes

Hey everyone,

I’m living in a condo in the US where Spectrum is the only available internet option (the plan provides around 600 Mbps download and 22.5 Mbps upload). My PS5 is connected directly via Ethernet cable, but while I'm in a match playing EA FC 27, my ping constantly spikes from a stable ~33 ms up to 250–300 ms, making the game completely unplayable.

I ran the Waveform Bufferbloat test and got a Grade C. Here are the exact numbers from the test:

  • Download: 560 Mbps (Download Active latency was only +14 ms)

  • Upload: 23.2 Mbps (Upload Active latency spiked to +96 ms)

It's pretty clear my upload channel is choking and causing massive bufferbloat. I have my own physical modem and router setup in my apartment, but the router provided by spectrum locks down advanced settings, so I can't enable QoS or limit my upload bandwidth.

Since Spectrum is my only provider choice here, I wanted to ask the community:

  1. If I buy a neutral third-party router with SQM (like a GL.iNet Flint 2 or an ASUS with QoS) to replace the current router behind my modem, will that completely fix this upload bufferbloat issue?

  2. Are there any caveats with using a personal router on a condo-bundled internet plan when Spectrum is the only internet provider available?

Any advice or confirmation before I drop money on a new router would be hugely appreciated!


r/HomeNetworking • • 10h ago

Mesh or Access points

Post image
3 Upvotes

Good afternoon! I need some advise. I recently purchased some deco 7 units from Costco. We are still having issues where a deco will turn red (no WiFi) and then within a few minutes come back online.

After reading reviews looks like you can get a good nine or junk one….. so it can easily go back.

Here is the question: 4 module ubiquity mess. Or. WiFi access points across the house with mainly cat 5.

Thanks!!!!


r/HomeNetworking • • 10h ago

Unsolved I can access a website through its domain name but not its IP. Why?

0 Upvotes

This all started when I was trying to use GET on a sourceforge file to install ApacheGUI for an Apache Web Server I'm setting up. I noticed that the GET command was getting stuck on "Connecting to..." with an ipv6 address.

On my host machine, I manually typed in the ipv6 address it was using into a webbrowser, and lo and behold it failed, with the error SSL_ERROR_NO_CYPHER_OVERLAP. Figuring it must've just been a bad DNS record, I ran nslookup for sourceforge, and tried swapping the domainname in the GET command with the ipv4 addresses. Both failed.

Puzzled, I visited sourceforge.net in my browser, opened up inspect element, and found the address it was using...

and then connected to that IP address directly...

And it failed again. But how is this possible? How can I access this website through its domain name but not its IP address that said domain name resolves to? Is there any way to use a GET command on a website like this, or am I SoL?


r/HomeNetworking • • 11h ago

Omada Multi-WAN Wired VPN Router ER605 - Will this do everything I want?

1 Upvotes

I am looking to replace my router that is nestled between my modem and my unmanaged switched. I have ALOT of home assistant wifi devices in my house that all talk to my mesh network ( Deco ). I am aware that the ER605 is a wired unit and offers no WIFI.

I want to block all of my random home assistant devices from going on the internet or calling home. With that said, my current router ( archer A6 ) does not offer that ability.

I would like to confirm that a ER605 can give me the ability to specifically block individual IPs/MACs from going on the internet but still allow local usage/traffic in my home. Can anyone confirm this? Copilot has suggested it to me, I like the price, i just want to confirm the usage.

Thanks


r/HomeNetworking • • 11h ago

What's your favourite OpenWRT router? Which would you love to buy today?

Thumbnail reddit.com
0 Upvotes