r/Handloads • u/KCnSB • Jun 10 '26
.357 Mag reload
How are you keeping track of your reload info?
r/Handloads • u/KCnSB • Jun 10 '26
How are you keeping track of your reload info?
r/Handloads • u/SuspiciousBear3069 • Dec 24 '25
r/Handloads • u/jimmycargo • Dec 25 '23
I ordered once fired .308 NATO brass to handload. This is the first time I've ordered used brass.
Most of it looks like Lake City ex-military brass. None of the brass will fit easily in the chamber. If it does fit in, it only ejects with great difficulty.
The throat, shoulder and base dimensions are within specs, so the body diameter must be swollen and out of specs.
How do I reform the casings or did I buy a bunch of useless brass? It looks like the manpower to remediate this is not worth it.
Thanks in advance.
Cargo
r/Handloads • u/Shey-99 • May 18 '25
Can a flat or round nose 45 have a pair of crossed grooves filed into it to cause it to produce a different wound channel? Ive considered also using a knife to cut an X in the front, not sure if it would do anything but experimental is the fun of it all.
r/Handloads • u/aphocks • Dec 29 '24
I am interested In a rifle build for survival type hunting fantasies, and I am not a reloading expert. So I wanted to come here and ask people who actually knew what they were talking about. I don't think the usual multicaliber systems like barrel swaps and 12 gauge insert guns make the most sense because of rezeroing issues, weight, and practicality. These solutions are often in survival discussion topics for the advantage of not needed multiple guns for different uses, or so that scavanged ammo is more likely to be useful.
This lead me to wonder about a single cartridge that could just barely bridge the large gap between class 1 and class 3 game when loaded in two different "flavors".
I am guessing it would need to be in the 6-7mm range caliber. Small enough to not be too devastating to rabbits, but large enough for deer/elk.
The first thing that came to my mind was something like a 25-06. I am imagining a full power (or even +p) 120 gr loading for larger deer-like game. Then a down-loaded 90 gr bullet for varmint.
Another concept I know nothing about is sabot rounds or rat shot. Is it possible that maybe something like a 30-30 loaded normally for deer, and then one lighter loading with a sub-caliber sabot round, or maybe shot round exists for varmint?
The goal being practically taking small game without vaporizing them, while also effectively killing 300 lbs animals, simply by swapping between the two cartridges in the same barrel and chambering. All this without needing as much rezeroing or having to inventory multiple cartridges and barrels in your survival kit.
I'm not sure if this concept is realistic or possible but I would love to hear suggestions for a cartridge, and loading options.
r/Handloads • u/insaneinsanity • Feb 20 '16
Plated CamPro HBWCs. 2.7gr Titegroup. OAL: 1.165 (nearly flush)
r/Handloads • u/Love-Knuckle-777 • Apr 01 '25
As this site does not allow posts this is our newest copper plating machine for all manner of boolits. must visit our home page for details
r/Handloads • u/[deleted] • Apr 09 '21
Bullet is X-Treme 165gr rn seated to 1.150” 3.2gr Unique using a standard spp
r/Handloads • u/XSlevinn • May 31 '17
Posting this since I have been struggling to find decent load data for Eggleston Munitions 200gr Polycoated .308 (but actually .309 dia) bullets for SBRs. 8" barrel, 1:7 twist, pistol length gas, suppressed.
I started at 10gr of Winchester 296 (H110 is the same) and worked my way down in .5gr decrements. All were 100% reliable except the 8gr load which fed reliably but did not hold bolt open on last round. I ran them through my chronograph and got the following data:
Sorry for formatting of FPS below. Reddit formatting didn't want to play nice with my Chronograph output. I cleaned it up best I could.
Created: 05-29-2017 11:31:35
Description: 10gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
6 1197
5 1241
4 1226
3 1219
2 1175
1 1241
Average: 1216.50
StdDev: 26.07
Min: 1175
Max: 1241
Spread: 66
True MV: 1216.50
Created: 05-29-2017 11:34:41
Description: 9.5gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
5 1135
4 1136
3 1122
2 1110
1 1204
Average: 1141.40
StdDev: 36.58
Min: 1110
Max: 1204
Spread: 94
True MV: 1141.40
Created: 05-29-2017 11:35:24
Description: 9.0gr W296 Green eggleston 200gr
Temp: 76 °F
BP: 30.06 inHG
Shots FPS
5 1071
4 1021
3 1051
2 1041
1 1141
Average: 1065.00
StdDev: 46.15
Min: 1021
Max: 1141
Spread: 120
True MV: 1065.00
Created: 05-29-2017 11:37:12
Description: 8.5gr W296 Green eggleston 200gr
Temp: 77 °F
BP: 30.06 inHG
Shots FPS
5 983
4 1029
3 974
2 1014
1 1094
Average: 1018.80
StdDev: 47.62
Min: 974
Max: 1094
Spread: 120
True MV: 1018.80
Created: 05-29-2017 11:39:49
Description: 8.0gr W296 Green eggleston 200gr NO LAST ROUND BOLT HOLD
Temp: 77 °F
BP: 30.06 inHG
Shots FPS
5 911
4 958
3 858
2 982
1 1056
Average: 953.00
StdDev: 74.61
Min: 858
Max: 1056
Spread: 198
True MV: 953.00
r/Handloads • u/cawpin • Nov 11 '19
We have re-launched the sub. Posts will be load data only. All other reloading related posts should go to /r/reloading or another related subreddit. There is user flair for your selected brand; let us know if you want us to add others.
We will be developing the sub as time goes on, possibly adding a wiki if needed. Please read the rules, all two of them at this point.
The sub is Restricted right now, so you must be approved to post. We may lift that requirement depending on interest and mod load.
r/Handloads • u/cawpin • Jun 25 '20
Another plinking load that is effective for hunting as well. Functions just fine in GI and unmodified PMags.
r/Handloads • u/SophisticatedHick • Mar 13 '15
8.0 gr with CCI 300 primers in a Glock 20SF with a lone wolf 6" aftermarket barrel and slide. Fair recoil impulse and muzzle flash in low light conditions. Hornady 9th edition lists 8.4gr as max load, so this is close but should be safe.
No idea on velocities as I don't have a chrony, but I have a feeling these rounds are cooking right along at 1200 fps or so.
r/Handloads • u/cawpin • Nov 21 '17
This is a new "cheap load" for me. $0.36/each not counting brass.
I just wish X-Treme would actually get the 1000 quantity of the bullets in stock. The would drop the cost 5-6 cents per round.
r/Handloads • u/a594109 • Jan 08 '17
This shot sub MOA out of my Radical Firearms upper.
Case Length: 1.560"
Primer: CCI No. 350
Powder: Hodgdon Lil' Gun 29.5 gr
Projectile: Hornady FTX 325 gr
C.O.A.L.: 2.148"
Avg Velocity: 1,795 fps
r/Handloads • u/cawpin • Dec 24 '15
This is my new cheap load. These projectiles are only $0.18/each as opposed to $0.30-1.00 for other .458 projectiles.
With a corrected bullet length of 0.865" and a case length of 1.575", QuickLoad gives 27011 psi and 1494 fps with 83.43% powder burn in my 12" barrel. Hopefully they shoot well enough to be my plinking load.
r/Handloads • u/cawpin • Dec 26 '15
This is my first attempt at the heavy subsonic stuff. This OAL is the longest that will fit in a PMag due to the rib.
QuickLoad
1.575" case length
25526 psi
1036 fps
96.2% case fill
81.78% burn in 12" barrel
r/Handloads • u/MunkiRench • Apr 23 '15
For the 6mm FAT RAT, Varmint variant
RE-15 29.1 - 29.4gr; node in this range
107gr SMK
COAL 2.245
Lapua brass, already fireformed
getting 2770-2810fps with 24" barrel
Max safe tested load 29.7gr RE-15. Quickload calculates max pressure at 62826psi at 2838. Primers crater but do not flatten. Note that ALL tested rounds, including minimum of 28.2gr, had cratered primers despite being well below max (30.0) given by creator of the cartridge.
Fireforming: manufacturer/creator of this wildcat (Lee Wells) publishes fireform load at 30.0gr. I fire-formed at 29.5, had flattened primers. Note that fireform loads have significantly less capacity, shoulder is blown forward 0.075 inches during fire-forming.
r/Handloads • u/[deleted] • Nov 24 '15
Winchester Large Pistol Primer
Assorted brass
4.4gr TITEGROUP
Case flared to .478 (OD)
.452 Berry's 230gr plated RN
OAL 1.262
Loaded on a Hornady LNL AP using PTX and bullet feeder. Taking it easy and paying attention I average around 400 rounds an hour.
r/Handloads • u/Bearfawker • Mar 13 '15
124 gr plated RN from RMR (which I'm told by internets is same as xtremebullets now) cci #500 5.0 gr CFE pistol 1.150 OAL
r/Handloads • u/adger • Mar 17 '15
Seating Depth: to crimp groove
Primer: CCI#550 (Small Pistol Magnum)
Powder Charge: 9.5gr (Min 9.3, Max 10.3)
Velocity: 1100fps (5-shot average)
Platform: Ruger GP100 MC (4" bbl)
The bullet is a 158gr Lee LSWC - cast using a commercial (6-cavity) mold from Magnum Shot lead. BHN is around 18 as I recall, will update when I measure. Bullets are powder-coated with Harbor Freight red. There was some unburned powder left over, but only a few flakes here or there. I'll be upping the charge to see if it likes the increased pressure, as I've heard Blue Dot does best on the high end. Primers are already a bit flat, so I don't think I'll be going above 9.8. Accuracy is undetermined as yet - I'll update in the future.
r/Handloads • u/[deleted] • Mar 13 '15
Winchester Large Pistol Primers
5.4-5.5 IMR PB Powder
Berry's 230gr plated round nose bullets
1.24 COAL
Cycles perfect in an XDS 3.3" and 4.25" and 5" 1911's. Recoil is medium.
r/Handloads • u/adger • Mar 17 '15
Hull: Winchester AA
Primer: Win 209
Powder Charge: 22gr
Wad: Federal 12S3
Projectile: Lyman 525gr lead cast sabot slug
Velocity: 1124fps
I've found that this load results in a slightly "long" load, meaning the crimp doesn't want to stay closed. I may try bumping this load down to 20gr - I haven't done a lot of research as far as reducing shotgun loads. My current understanding is that you don't mess with them for the most part. Recoil was more manageable with this load than some others I've tried, and accuracy was decent.
Edit: Forgot to mention, as with every other load I've found for this slug so far, the wads get completely obliterated. Petals rarely remain attached, and the base is severely deformed by crush damage, with evidence of gas blow-by.
ALTERNATE LOAD:
Hull: Remington STS
Primer: Win 209
Powder Charge: 22.5gr
Wad: 12F114
Projectile: Lyman 525gr lead cast sabot slug
Velocity: 1195fps
r/Handloads • u/shortbusinc82 • Mar 17 '15
9mm 124gr rn cast(tire weights) on top of 3.7gr of HP-38 set to an oal of 1.150
r/Handloads • u/jht05016 • Mar 17 '15
Runs great and is very accurate in my open steel gun as well as my glock and sr9. Moly bullet used is from blue bullets. Just make sure not to crimp moly too tightly or it will lead the barrel.