r/Handloads • • Nov 11 '19

Let's see that data. We are back!

11 Upvotes

We have re-launched the sub. Posts will be load data only. All other reloading related posts should go to /r/reloading or another related subreddit. There is user flair for your selected brand; let us know if you want us to add others.

We will be developing the sub as time goes on, possibly adding a wiki if needed. Please read the rules, all two of them at this point.

The sub is Restricted right now, so you must be approved to post. We may lift that requirement depending on interest and mod load.


r/Handloads • • Jan 08 '17

.458 Socom 458 SOCOM, Hornady FTX, Hodgdon Lil' Gun

9 Upvotes

This shot sub MOA out of my Radical Firearms upper.

Case Length: 1.560"

Primer: CCI No. 350

Powder: Hodgdon Lil' Gun 29.5 gr

Projectile: Hornady FTX 325 gr

C.O.A.L.: 2.148"

Avg Velocity: 1,795 fps


r/Handloads • • Nov 21 '17

.458 Socom .458 Socom, X-Treme plated 300 gr RNFP, 36.0 gr W296, 2.005 OAL

8 Upvotes

This is a new "cheap load" for me. $0.36/each not counting brass.

I just wish X-Treme would actually get the 1000 quantity of the bullets in stock. The would drop the cost 5-6 cents per round.


r/Handloads • • Nov 24 '15

.45 ACP .45acp TITEGROUP Berry's 230gr plated RN

8 Upvotes

Winchester Large Pistol Primer

Assorted brass

4.4gr TITEGROUP

Case flared to .478 (OD)

.452 Berry's 230gr plated RN

OAL 1.262

Loaded on a Hornady LNL AP using PTX and bullet feeder. Taking it easy and paying attention I average around 400 rounds an hour.


r/Handloads • • Jun 25 '20

.458 Socom .458 Socom, Hornady 4500 300 gr JHP, 30.2 gr W296, 2.035" OAL

6 Upvotes

Another good all around load.


r/Handloads • • Feb 14 '20

300 HAM'R load data

6 Upvotes

I'm currently developing a load for an Ar15 chambered in 300 ham'r with 8" barrel 11.25 twist

First ladder test is 150gn hornady sst with Hodgdon H4198 In Wilson brass and cci primers. Powder charge ranges from 21.5gr to 24.5gr in .5 increments. Range data to follow on Saturday when we get some decent weather here in kansas.


r/Handloads • • Mar 17 '15

.300 Blk 300 Blk; Unique; Lee 230gr 5r (Subsonic)

6 Upvotes
  • Seating Depth: to crimp groove

  • Primer: CCI#400 (Small Rifle)

  • Powder Charge: 5.4gr (Min unknown, Max unknown)

  • Velocity: 994fps (3-shot average)

  • Platform: AAC Handi-Rifle (16.1" bbl, 1:7 twist, unsuppressed)

  • Brass: converted .223

I'm working this up as my go-to economy subsonic round once I have a suppressor. Bullets are cast from Lee commercial (6-cavity) molds, then powder coated with Harbor Freight red. I've not done accuracy testing with this load yet - I've been simply working up a functional load. Because there is no published data on this, it's the one load I've set up based on info from "some guy on the internet" who was using 5.8gr. I'm told it will not cycle the action on an AR. My cost breakdown is 7.2¢ for lead, 3.5¢ for the primer, and 1.2¢ in powder. About 12¢ per round in consumables. I'll be updating this entry, as I plan to shoot a lot of these. Although I've not yet done accuracy testing, I've not had any trouble with keyholes (1:7 twist).


r/Handloads • • Apr 06 '23

.357 Sig Are there any .44 magnum revolvers pressure rated as high as the Ruger Super Blackhawk?

5 Upvotes

A friend of mine is an enthusiastic handloader (the by the book kind not the liability kind) and with his Super Blackhawk he can cook up some idiotically hot cartridges. It got me wondering, are any .44 revolvers pressure rated to the same degree as the RSB?


r/Handloads • • Nov 27 '22

.300 Win Mag Fine tuning my handload?? NSFW

5 Upvotes

I’ve been working on a handload for my 300WM and the grouping is great at 100yrd but my SD is 16. This is a hunting round and my normal shot is 400-500yrd. I want to get my ES and SD down to a good reliable load. Here is the load I’m working with currently.

Powder 69.5 RL-19 Brass Norma Primer 215gm Projectile Barnes 175gr lrx

Average speed is 3024 fps


r/Handloads • • Jul 09 '22

set your own .280 AI for elk

5 Upvotes

Novice hand loader with brand new rifle. I’m about to go to the range tomorrow and dial in a new rifle and scope pushing out 145gr Barnes LRX with 49.5 gr of IMR 4350. I’ll play with heavier loads incrementally another day but I wanted to see if anyone here is going for deer or elk with .280 AI and wanted to hear your opinions, 145 gr LRX and 150 gr TTSX is all I have/can find right now.


r/Handloads • • Nov 04 '21

.38 Spcl 38spl 148gr Cast Wadcutters

5 Upvotes

I used 3.2-3.3gr Bullseye with Lee Tumble Lube bullets that I powder coated.

Shot out of a 5” barrel S&W 10-7/5

Seated flush with a light crimp using CCI pistol primers and Starline brass.


r/Handloads • • Jun 25 '20

.458 Socom .458 Socom, Hornady 45015 325 gr FTX, 29.5 gr W296, 2.140" OAL

5 Upvotes

Another plinking load that is effective for hunting as well. Functions just fine in GI and unmodified PMags.


r/Handloads • • Dec 24 '15

.458 Socom .458 Socom, Rainier plated 350 gr FP, 35.0 gr IMR4198, 2.015 OAL

5 Upvotes

This is my new cheap load. These projectiles are only $0.18/each as opposed to $0.30-1.00 for other .458 projectiles.

With a corrected bullet length of 0.865" and a case length of 1.575", QuickLoad gives 27011 psi and 1494 fps with 83.43% powder burn in my 12" barrel. Hopefully they shoot well enough to be my plinking load.


r/Handloads • • Apr 06 '15

7.62 Nagant 7.62 Nagant, W231, 100gr FPRN .313 (32 cal)

5 Upvotes

Made using hand-tooled cartridges formed from .223/5.56 brass. 32cal .313 cast bullets with a HiTek coating. Five test rounds from 2.7gr to 3.2gr, with a set of mil. surp. for comparison. (A more detailed write-up on my reloading process is available on /r/reloading.)

No cracks, brass falls from the cylinder freely or with just a little tap, gas seal is fully functional. Bullets keyhole pretty badly, except for the ones I loaded with the round end facing in as ersatz wadcutters. Those flew perfectly. Even with the keyholing, Point of Aim = Point of Impact.

Next time, I'll try some .30 carbine bullets in them and update on how they fly.

COAL: 1.500"

Bullet inset: .080"

Primers: CCI #400 (Small Rifle)


Chony results:

Mil. Surp (13 rounds): Hi: 824 Lo: 758 Av: 784 Sd: 23

2.7gr (5 rounds): Hi: 689 Lo: 470 Av: 620 Sd: 101

2.8gr (5 rounds): Hi:701 Lo: 554 Av: 651 Sd: 66

2.9gr (5 rounds): Hi: 711 Lo: 554 av: 637 Sd: 81

3.0gr (5 rounds): Hi: 696 Lo: 545 Av: 645 Sd: 68

3.1gr (5 rounds) Hi: 764 Lo: 656 Av: 730 Sd: 50

3.2gr (5 rounds): Hi: 763 Lo: 658 Av: 717 Sd: 43


r/Handloads • • Mar 19 '15

.300 Blk 300 Blk; IMR4227; 125gr SMK

5 Upvotes
  • Primer: CCI #400

  • COL: 2.210"

  • Powder Charge: 16.5gr

  • Velocity: 1852fps

  • Platform: AAC Handi-Rifle 16" 1:7 twist

I based on Sierra load data for H4227, with the assumption that H4227 = IMR4227 which I've heard is the case. Exceptionally clean powder burn, good accuracy. However, even though this is near the bottom end of the charge range, my primers came out pretty flat, and the velocity was about 100 fps lower than expected. I likely won't be pursuing this load further.


r/Handloads • • Mar 18 '15

.300 Blk 300 Blackout; IMR 4227; 150gr Hornady SST

5 Upvotes

14.5gr with COAL at 2.220. Cannelure is not at case mouth.

Avg Velocity - 1500fps

This load was best in the ladder test on 10.5" barrel pistol gas system. Cycled well and held bolt back on empty


r/Handloads • • Mar 17 '15

12 Gauge 12 Gauge; Blue Dot; Lyman 525gr Sabot Slug

5 Upvotes
  • Hull: Remington STS

  • Primer: Win 209

  • Powder Charge: 43gr

  • Wad: 12F114

  • Projectile: Lyman 525gr lead cast sabot slug

  • Velocity: 1500fps

Yes kids, 525gr at 1500fps. That's edging into .30-06 territory as far as kinetic energy. This round seated and crimped nicely. They shot well, but frankly I don't load many of them because the recoil is brutal. As with every other load I've tried for this slug, the wads get mangled.


r/Handloads • • Mar 13 '15

10mm Auto 10mm Auto. Alliant power pistol. 180gr Rainier JHP.

5 Upvotes

8.0 gr with CCI 300 primers in a Glock 20SF with a lone wolf 6" aftermarket barrel and slide. Fair recoil impulse and muzzle flash in low light conditions. Hornady 9th edition lists 8.4gr as max load, so this is close but should be safe.

No idea on velocities as I don't have a chrony, but I have a feeling these rounds are cooking right along at 1200 fps or so.


r/Handloads • • Jul 09 '23

.308 Win Hand loading

4 Upvotes

Looking to start reloading my own ammo. .308 specifically. 1. Do yall think it's worth it? 2. Any recommendations on buying a full kit or just buying every reloading piece separately?


r/Handloads • • Jun 27 '23

.300 Blk Canebreak 5" all fouled up with H110?

4 Upvotes

I've got the 5" barrel and she's all fouled up and doesn't work. It seems like it might need to be replaced said a tech from Sig (I live near them).

I use fiocchi small rifle mag primers and H110 with Missouri Bullet company 250gn (18brn lead with baked hi-tek baked on coating).

I don't know that I've even put more than 500 rounds through this thing since I got it and they're telling me the gas block is super fouled.

Is it possible that the coating or powder is causing fouling in the gas block? If not, what else?


r/Handloads • • Jun 14 '23

set your own Copper Plated Hand Cast Bullets

4 Upvotes

I think we Cracked The Code on making many Copper Plating Hand Cast Boolits. ] at one time. (https://youtu.be/pcjSMarI8sg)


r/Handloads • • Jun 07 '21

.300 Blk 245Gr missouri bullet 300 BO?

4 Upvotes

I have a box of these torpedos, but I can't find any discussions on a decent (subsonic) load for them.

Any help, friends?


r/Handloads • • May 29 '21

.300 Win Mag Load development ladder @ 400 yds?

4 Upvotes

I'm going to the range to shoot 10 different powder loads. I have 24" square white cardboard aiming points to print the ladders/impacts on a 400 yard range.

These are .300 Win Mag, of 65-72 grains, each load is .7 grain larger. How much will the rounds climb? Will about 24" be enough space to capture the various trajectories?

There is a 100 yard and 400 yard range, I'm planning on using the 400 yard range.

Thanks in advance.


r/Handloads • • Dec 02 '20

.45 ACP I need to pick 1 powder for both .45acp & 9mm. What do you recommend?

4 Upvotes

Says it all. New to this would rather learn with one powder 1st.


r/Handloads • • Mar 25 '20

.45 Colt Using wax+shot on a 30-30 shell?

4 Upvotes

Hi! I inherited an old beat-up 30-30 and it runs Ok... but I have a question. I have seen lots of shotgun shell wax slug videos and they look impressive. So, what would happen if you pulled the lead bullet out of a 30-30 shell, left the powder the same, and added wax+bird shot to the shell? Would the resulting shell fire Ok, or would it destroy the rifle? ( Yeah, I know the flair says .45; there isn't one for 30-30)