r/Fixxit • • May 20 '25

Yamaha virago xv250 2002, does my front tyre need to be changed due to those cracks or is it ok?

Thumbnail
gallery
2 Upvotes

r/Fixxit • • Aug 07 '24

WHY WONT MY SCOOTER START!?!?

0 Upvotes

2014 Keeway Zahara 125cc

Hey guys I just don‘t understand what could be wrong with my scooter. I‘ve replaced the battery, and spark plug and I took the carburetor out and cleaned the jets and everything and it still won‘t start. It won‘t kickstart or start holding the throttle. I bought it from a guy who said it sat for 2 years then he was using it recently. At his house It worked and I test drove it. Got home and I‘ve had this issue since. It turns over, has gas, hows power. What else could it be!?!?? Please help!


r/Fixxit • • May 10 '23

Should I drill holes into my exhaust?

Post image
0 Upvotes

My Suzuki Intruder sounds good but it's quiet. I'd like to have more presence on the road for safety. I like the aesthetic of my exhaust. Should I drill holes in it? I don't want it to sound like sh*t.


r/Fixxit • • Mar 17 '22

Unsolved Motorcycle is dripping fuel. Can I ride it to nearest shop (2kms) - Bajaj NS 160 2017

1 Upvotes

r/Fixxit • • Feb 04 '20

PSA: Testing your battery with a voltmeter does not give an accurate reading of its life!

3 Upvotes

I'm frustrated because this is a very basic concept in comparison to the overall mechanics of a vehicle, but there is a huge misconception about it.

Yes, your battery should read a little over 12v; if the vehicle is running, it should read over 13v or 14v. If you get these readings, it does not mean that your battery is good. It just means that it's a normal 12v battery. A 12v battery will always put out 12 volts, even when it is dead or dying!

An exception to this is if the battery has one or more dead cells, then it will read less than 12 volts. However, this is not really a common issue.

Some multimeters will have a battery test function for AA or 9v batteries, but I don't believe there are any that will test a vehicle battery.

In order to test a battery, you need a load (an electrical accessory) with a known Ohm value in order to measure the amperage put out to the accessory. The voltage is a constant value in this calculation, and has nothing to do with your battery health.

You can take your battery in to an automotive store or buy a tool designed to test 12v batteries, but a digital multimeter is not that tool. Please stop spreading this misconception.


r/Fixxit • • Mar 03 '18

Cobbled.

Post image
4 Upvotes

r/Fixxit • • Apr 25 '22

Some of my wheel balancers fell. Is it OK to ride for a few days?

Post image
1 Upvotes

r/Fixxit • • Jul 06 '24

2006 ZX10R won't shift

0 Upvotes

Clutch in, only makes a clicking noise when trying to shift down or up


r/Fixxit • • Jul 09 '17

Left Crank Arm Fell off can it be saved?? (Bike: Next DS 24 Tiara)

Post image
0 Upvotes

r/Fixxit • • Jan 19 '17

Can someone please help me identify this screw?

Thumbnail
i.reddituploads.com
0 Upvotes

r/Fixxit • • Oct 27 '21

Do I need to fill the battery with the liquid?

1 Upvotes

My scooter battery got stolen, so I purchased one but I'm not sure if I need to fill it with the liquid that came with the battery or not. Can any1 give me their thoughts. Thanks


r/Fixxit • • Aug 09 '25

2005 Kawasaki Z750S - Foam inside coolant when blipping throttle

4 Upvotes

Recently I changed the coolant of my motorcycle and for some reason, I think it's running hotter. Unfortunately my bike does not have a thermometer to check the temperature.

I drained the system, flushed it clear, ran it with distilled water and then filled it up with new coolant.

I tried burping the system a more few times. I noticed a few bigger bubbles in the beginning and some kind of foam when giving throttle. Does coolant normally run clear? The bubbles do disappear when I'm not on the throttle.

I read foam could indicate a blown head gasket...


r/Fixxit • • Oct 26 '24

Unsolved Trying to compile a competent but very light toolset to keep on rides for a metric bike. This is what I have so far. Any suggestions?

Post image
3 Upvotes

r/Fixxit • • Feb 10 '21

Locked thread due to people sayings plugs are ok. Plugs are not safe. A plug patch is safe. Links provided for clarification.

10 Upvotes

-this is an acceptable repair plug patch.

-This is an unsafe bullshit repair.

-Link to BMW product reinforcing the idea that these things are not a safe permanent repair.

Please don't recommend cheap-o tire plugs to inexperienced do it yourself techs in this sub. I don't care who disagrees with me. There is nothing to gain by telling people you don't know on the internet to do something that is even 1% unsafe. Lets give the best information we possibly can.

You can look at the pictures and tell one option is better than the other option. If the owner is too fucking lazy or cheap to remove the tire to affect a safe repair, that's on them. Let's not pretend that jamming a gummy worm in the tread is acceptable just because it's easier.


r/Fixxit • • May 31 '25

Acceleration wobble

0 Upvotes

When I accelerate the steering start to wobble. The tire pressure is set to 34psi front 36psi rear.

R1 from 06, mileage is almost 25k km or 15-16k miles.


r/Fixxit • • Oct 24 '17

Motorcycle Jetting Explained and helpful visual graphics

Thumbnail
youtube.com
0 Upvotes

r/Fixxit • • Dec 14 '15

600cc Honda cbr 1999 I belive

0 Upvotes

I need help on fixing a Honda cbr that I got from a friend recently. I know nothing about it and have no idea where to start. Thanks guys. Ill post pictures if anyone wants. So! I know I didn't post any information last night, I'm here to fix that now that I have time. So its a 99' cbr that my friend had in his garage the last 5 or so years. It has a lot of missing parts and I don't have any knowledge about bikes. Ill post an album of the bike in the bike shortly. http://imgur.com/gallery/T13z2


r/Fixxit • • Sep 14 '25

RevZilla sent my cam chain in a soft envelope no padding, risk it?

Post image
0 Upvotes

I'm wondering if I should wait 7 days for another one, or just run this if there's no binding or kinks. The plastic doesn't look like it had any impacts, like it tore through.

Think I'm just salty so wanted opinions


r/Fixxit • • Mar 18 '22

I have a 2021 CBR300R and it won’t start. I made sure the bike is in neutral and it has a full tank of gas.

Post image
5 Upvotes

r/Fixxit • • May 24 '17

Mountain bike brakes [vbrakes] rubbing on BOTH sides of rim, Help!

Post image
0 Upvotes

r/Fixxit • • Feb 07 '22

Chain is brand new, does this sag seem okay to you? I'm having trouble measuring it properly.

0 Upvotes

r/Fixxit • • May 07 '22

Solved I fixed it: My new front tire was very close to rubbing after swapping out my old tires. I notched my front fender to raise it =)

0 Upvotes

r/Fixxit • • Jan 06 '23

honda super dream 2000 ,the left in using,the right used make smell in burn,what the oil engine is good,the old oil engine in 2 week in good?

Thumbnail
gallery
3 Upvotes

r/Fixxit • • Nov 15 '25

Thinking to install rider backrest on my Honda Shine 150 – need suggestions!

Post image
0 Upvotes

Hey everyone! I’m super excited about this one and wanted to get some real-world feedback before I go ahead. 😄 I’m planning to install a rider backrest on my Honda Shine 150, mainly for long-ride comfort and better lower-back support. I found a design like the one in the picture – simple, upright, and padded. Here’s my big question to fellow Shine owners and riders: Is it practical for daily use? Will it affect the riding posture or handling? Any issues with seat balance, braking, or comfort? Has anyone installed something similar on a commuter bike.

I love the idea of extra lumbar support, especially for city rural high way mix commuting, but I don’t want it to mess with safety or bike balance.

Would love to hear your experiences, warnings, hacks, or even photos if you’ve done it!