r/FixMyPrint • • Mar 29 '20

Asking for help... and how to actually get it

Post image
774 Upvotes

r/FixMyPrint • • Nov 05 '24

Helpful Advice Here’s your daily reminder to dry your filament

Post image
292 Upvotes

Thought it was stored dry so I’d try printing without drying first as it wasn’t going to use much filament anyway, didn’t get away with it this time but after 6 hours of drying it printed perfectly 👌 Sunlu dryer at temp setting 2 for Matte PLA with a load of colour changing silica gel in the middle of the role rather than in the compartment at the back of the dryer


r/FixMyPrint • • 3h ago

Fix My Print X2D AMS Enterprise

Thumbnail
gallery
2 Upvotes

Hi all,

I am a 3d printing newbie-ish. I have an X2D and its worked brilliantly for the last 6 months.

I'm trying to print this model: https://makerworld.com/en/models/95478-enterprise-d-galaxy-class?from=search#profileId-158613

But in the options there's one using a 0.2mm nozzle and it'll integrate colours from AMS.
I perhaps foolishly chose to use this setup.

I have a new 0.2mm nozzle which have printed the saucer sections fine, no spagetti, and a decent quality print.

But I'm trying now to print the body of the enterprise (its in two halves with supports for the sides) and running into problems. I attach some photos. Main issues seem to be huge purge volumes, lots of stringing and then I've had to go out and clear poop from the chute multiple times. Like when I've watched it, its purged for atleast 20 seconds, had a great blob of PLA and then done a purge again.
Its cooler here and the fans are running so I'm trying to work out if this is a model problem, or my use of default settings.

I'm using PLA thats dry and kept in the AMS with desiccant bags in the base. Only thing I can think of is the temperature has dropped (the printer is in an outbuilding) so perhaps things aren't melting enough, or are cooling too quickly? Or the fan is blowing 100% and making strings blow in places they shouldn't?

I've kept the print going but I'm pretty sure its going to fail ultimately because the printer has just given up on supports for one of the halves.

Would posting a timelapse if I can extract it be helpful?

Any thoughts or more info I can supply would be appreciated.


r/FixMyPrint • • 3h ago

Fix My Print .4 vs .6 Unicorn Nozzle First And Last Layers

Thumbnail
gallery
2 Upvotes

Hello!

I recently upgraded my Creality Ender 3 V3 KE with a Ceramic Unicorn Hotend

Today I wanted to try a larger nozzle so I swapped in the 0.6mm, set Orca Slicer to use the printer preset and my existing filament settings. I set both first and layer heights to be 0.3mm and kept the existing percentages for layer widths.

The top - 0.4mm Nozzle

The bottom - 0.6mm Nozzle

As you can see the top and bottom layer quality is worse, is this just the cost of using a larger nozzle or does my settings need to be dialed in further?

Just to clarify, there seems to be small gaps between the flat layers


r/FixMyPrint • • 52m ago

Fix My Print Brittle first layer

1 Upvotes

Hi !

I recently started printing with PLA (no problems with PETG, PA, PC...) again and I'm noticing that around ~13% of my test prints get very brittle first layers. The lines easily break and do not look like they are well fused together. I printed this : https://makerworld.com/fr/models/1836751-ams-purge-calibration-swatches?from=search#profileId-1961891

My settings :

BBL P2S + AMS 2 Pro

0,4 mm nozzle

Textured PEI plate

Bed at 60 degrees and nozzle at 220 degrees

I used BBL studio with 0,2mm standard preset.

I used default retraction settings.

I tried lowering the z offset by 0,02mm for textured PEI only but I feel like this is only a band-aid fix.

Can anyone help me with this problem ?

Thanks to anyone who answers !


r/FixMyPrint • • 56m ago

Fix My Print Terrible surface quality when printing multiple objects at once - Bambulab A2L

Thumbnail gallery
1 Upvotes

r/FixMyPrint • • 10h ago

Troubleshooting Elegoo Neptune 3 pro print issue.

5 Upvotes

I'm trying to pein5 a long print however the first layer doesn't stick. Leveled the bed 2x. Cleaned the plate with bishop and a quick wipe with rubbing alcohol. Printing at 220. And 65. PLA filament. Any help would be appreciated I'm still learning this art


r/FixMyPrint • • 2h ago

Fix My Print Gaps between hexagons in Honeycomb storage wall HSW

1 Upvotes

I am getting gaps between honeycomb cells in HSW on a recently assembled Voron 2.4, Orcaslicer. Picture taken from the end of layer 2. It is more evident in layer 1. A finished print shows gaps in the top layer. The gaps are located throughout the bed. Not every cell has the gaps. Not every side has gaps. The honeycomb are orientated such that there is a side purely in the y axis. Both this purely y axis line and diagonal lines are exhibiting this behaviour. The gap is always directly in the middle. I've tried 15% infill, 40% infill, full 100% perimeters.

Elegoo Rapid PETG with Orcaslicers in built profile. Dry but blasted 7 hours just to be sure.
0.4mm nozzle, stealthburner, v6 nozzle. Running TAP. Plenty of adhesive.
Bed temp 70c
Max volumetric speed 18mm^3/s. Tried lowering it to 80% machine side.
Flow Ratio 0.99 [default]. Tried 1.0. Tried bumping it up further by 1 and then 2% machine side.
Nozzle Retraction Settings default from the Voron 2.4 350mm orcaslicer profile.
Verified that the orcaslicers profile settings are correct by running through the calibrations.

Help would be greatly appreciated.


r/FixMyPrint • • 2h ago

Fix My Print Bambu Lab P2S – PETG building up on nozzle and causing blobs on first layer. Need some help!

Post image
1 Upvotes

Hi everyone!
I got my Bambu Lab P2S about a week ago, and I’m completely new to 3D printing.
So far, I’ve been printing with PLA without any problems. The prints come out perfectly, but I’m having some trouble with PETG.
I already tried printing something with PETG before, and although the print was relatively successful, I noticed that PETG was gradually building up on the nozzle throughout the print.
At the time, my solution was to pause and resume the print whenever I noticed the buildup, since this seemed to force a nozzle cleaning. However, I don’t think this is a proper solution, and I’d really like to understand what’s actually causing the problem.
Now I’m trying to print a larger object with a much bigger first layer, and the problem has become more noticeable. PETG starts accumulating on the nozzle, and I’m getting lots of blobs and imperfections on the first layer.
I’ve already tried a few things to rule out possible causes:
I’ve performed the temperature tower test.
I’ve completed the Flow Dynamics calibration.
The filament is completely dry.
My current printing temperatures are 240°C for the nozzle and 70°C for the bed.
Despite all this, I’m still experiencing the same problem.
Since I’m a complete beginner, I’m not sure where to go from here or what settings I should be looking at.


r/FixMyPrint • • 6h ago

Troubleshooting ABS tear like issue

Thumbnail
gallery
2 Upvotes

Hello, first time here as I can’t seem to figure this one out. I’m printing on a bambu h2s using Elegoo black ABS with the bambu 0.4 high flow nozzle. I’m using the standard 0.2mm h2s profile only changing the following.

Wall loops: 4
Sparse infill density: 8%
Sparse infill pattern: gyroid
Support: enabled
Support critical regions only: yes
Prime tower: disable

My filament settings have the default settings using the high flow direct drive for generic abs which prints at 60C chamber temp. 90C build plate. Nozzle initial layer at 260C and the rest at 270C
The max volumetric speed I changed to 25mm/s after doing a high flow nozzle test and that was on the more conservative side of the test, just a bit faster than the stock setting considering I have the high flow nozzle.

I did notice that the banding appears close to where the seam is. In the last picture you can see that the seam is along the same side where the major banding appears. Pictures 5 and 6 show the opposite side which doesn’t have as bad or visible of the banding but still somewhat. Appreciate any help ahead of time!


r/FixMyPrint • • 2h ago

Troubleshooting Print issues with K1C

Thumbnail gallery
1 Upvotes

r/FixMyPrint • • 4h ago

Fix My Print How can I fix this?

Post image
0 Upvotes

I am new to 3D printing and have been trying to fix this foe 2 days but to no avail.

As you can see the bottom of the curve is not printing correctly. I have changed all the settings that people normally suggested (ie lowering the nozzle temp, changing the speed for overhangs, changing the later height to 0.16, putting fan on 100%, adding mpre supports) but it didn't change anything. Please let me know how I can fix this?

I am using Creality CR M4 with 1.75mm PLA from BuildVolume @190°C nozzle temp, 60°C Bed Temp, sliced with Creality Print.

Printing with PETG made it better, but didn't solve the issue.


r/FixMyPrint • • 4h ago

Fix My Print ABS and ASA delamination

Post image
1 Upvotes

Gday guys, just struggling to print some ABS parts - unfortunately the geometry isn’t really negotiable, and of course the parts keep warping, pulling up from the bed, or delaminating. Any tips? Does GF help with this or would it reduce adhesion due to less SA? Happening with both ASA and ABS.
Printer is a stock P1S, the thing I’m printing is a heater so I will soon have a heated chamber but I don’t at the moment. Any tips?

Have tried all manner of temperatures, slowed it right down, preheated for literal hours, all different build plates (inc. no build plate, whoops)

Cheeeers


r/FixMyPrint • • 4h ago

Fix My Print Flashforge adventurer 3 raft sticking

1 Upvotes

Hi i am kind of new to 3d printing and I recently got a flashforge adventurer 3 lite as my first printer, for awhile the prints were very nice but recently without any change the raft has become annoying to pull of prints, It ends up either not fully coming off or if it does it has alot of stringy bits on the bottom of the print, does anyone know what to do or have a fix? Thanks


r/FixMyPrint • • 8h ago

Troubleshooting Problems with layer shifting/prints not connecting right

Thumbnail
gallery
2 Upvotes

Edit: I broke off the dovetail piece accidentally when futzing around with it earlier, it did indeed print, it was just weak. And we cut the benchy print halfway through intentionally.

hi guys! new-ish to the 3d printing world. I'm a vendor at anime/comic cons and in the past have paid people to 3d print things for me for my displays. i've done that by buying the file and just having them print them for me on their own printers. i've recently gotten my own printer (ender 3 original, and right now am using a Voxelab Aquila as well). I've been having issues with the prints just not...turning out right? like some things actually print correctly, and then on specific prints i've been having a lot of layer shifting issues.

I've tried:
- slowing down print speed
- tightening my belts
- different pla
- new nozzle
- cleaning the plate
- printing with the printer on different surfaces (i thought maybe the table was wobbling and i didnt notice?)
- changing infill
- changing temperature of nozzle and bed

nothing seems to be working. I was wondering if maybe it was my slicer/g-code? google/reddit gives me a million different answers. I've used prusaslicer for everything before and just downloaded ultimaker cura to give that a shot.

anyone got any advice/can anyone take a look at my g-codes to see if theres anything i should be doing? i can send over the actual 3d print files as well so you can see the originals too! thanks in advance :>

(and if i cant get this to work, does anyone offer extremely cheap and lowkey REALLY fast printing services? i have a con november 20-22nd in minneapolis and needed some display pieces. they dont have to be pretty/perfect, just functional)


r/FixMyPrint • • 5h ago

Fix My Print What would fix this?

Post image
1 Upvotes

r/FixMyPrint • • 11h ago

Fix My Print Random line halfway through print.

Post image
3 Upvotes

that line in the top half of the model showed up, definitely not on the file.

printing pla matte on a bambu p1s


r/FixMyPrint • • 5h ago

Troubleshooting Scratches/Etches on Bottom Layer w/ Carbon Fiber Plate?

Thumbnail
gallery
1 Upvotes

Hey!

New to 3D printing and using a Bambu A1 printer. I just bought a carbon fiber smooth plate from Amazon and started using it. I cleaned it well with water, dish soap, and a sponge 2x now but still having this issue where the bottom has white marks/scratches. I had the plate selected in Bambu before printing as well.

I was trying to print a moza wheel base dust cover but with the carbon fiber look on the bottom. I also was trying to print a shifter plate and had the same issue.

Each time I printed,, I waited until the plate reached around 25C (my room temp is 23C) and then bent the plate at the edges so the part would come free.

I read that running a flame over these areas would get rid of the mark but I didn't experience that.

Any idea what I could be doing wrong? Didn't have this issue with the normal textured plate. Is it a plate issue, nozzle issue, or something else?

Thanks!

Printer: Bambu A1

Print Speed: Standard

Filament: Bambu PLA Basic - Black

Hotbed Temp: 65C

Nozzle Size: 0.4mm


r/FixMyPrint • • 15h ago

Fix My Print Why does the concentric latter has blobs but for rectilinear one is fine?

Thumbnail gallery
4 Upvotes

r/FixMyPrint • • 16h ago

Fix My Print Persistent smeared/gouged corner on small flat prints — happens with and without ironing on P1S, X1C and H2D

Thumbnail gallery
4 Upvotes

Hi everyone, I’m trying to diagnose a persistent surface defect on small, flat, rounded-square parts. Any Idea what the problem is?

All settings and more information are on the original post


r/FixMyPrint • • 16h ago

Fix My Print How can i reduce or even eliminate the stringing here?

Post image
4 Upvotes

r/FixMyPrint • • 9h ago

Fix My Print Layers not smooth?

Thumbnail gallery
1 Upvotes

Bambu a1 - .02 nozzle - PLA multi color print

Help! Idk why my prints keep having rough patches.. I dried my filament and also slowed down my speed and acceleration. Settings in last photo... can someone help me figure out why its not printing smooth?


r/FixMyPrint • • 10h ago

Fix My Print Help on upper surfaces on large print

Thumbnail
gallery
1 Upvotes

Printing a rat skull mask. These aren't the top surface, but are upward-facing and they just bug me. Running Overture PETG at 230c, 0.24mm layer height, and 0.96 flow ratio. Have Z contouring active. Trying to decide if this is over or under extrusion? Or, just how life is at 0.24mm layers?


r/FixMyPrint • • 14h ago

Troubleshooting What do I even do? Can I fix this?

Thumbnail
gallery
2 Upvotes

SOVOL SV06 3D printer, Creality slicer
SOVOL PLA filament
Nozzle temp: 200° C
Bed temp: 60°C
Print speed: 40mm/s

I stayed with the printing in the beginning while it started printing a 5 hour print, after about 15 mins everything was good and I went to eat, came back after about 1.5 hours and everything was messed up, the nozzle is buried in this monstrosity and was dragging the print.

I’ve literally never had this problem and just printed yesterday, how does this even happen and why?

Is the entire thing trashed at this point, or can I remove this without damaging the wires and nozzle. It’s literally around all of it, I’m so upset honestly idk what to.