r/FixMyPrint • • Dec 31 '21

Helpful Advice Diagnosing First Layer Problems

Post image
2.8k Upvotes

r/FixMyPrint • • Jan 14 '21

“No, no, the blue wire...”

2.6k Upvotes

r/FixMyPrint • • 25d ago Bravo

Fix My Print Print came out Curved (P1S)

Thumbnail
gallery
1.6k Upvotes

So I'm printing a new handguard for my airsoft replica and the model was completely straight (you can see next to my first print of it) but this one came out curved. I did have to modify the stl in Fusion but the preview in fusion and bambu studio showed it as straight.

This was printed on a Bambu Labs P1S using Bambu studio, Bambu Labs PLA Basic in Black, 55° cryogrip glacier bed, and normal print speed and retraction settings for .16 high quality

Thank you!


r/FixMyPrint • • Jan 04 '25

Troubleshooting I’m really struggling.

1.6k Upvotes

Brand new p1s and ams took advantage of the Black Friday sale and came in 2 weeks ago was printing perfectly with no tweaks but all of the sudden it’s knocking my prints off the build plate and random filament is falling out of the nozzle? This started happening around the time I changed out the nozzle and extruder gears to hardened ones I watched countless videos before I even thought about changing them is it possible I wasn’t thorough enough? Or that the parts are faulty? Any and all information is appreciated greatly.


r/FixMyPrint • • Jul 01 '20

I'm thinking it's just one of my belts are loose causing the layer shift, but I'm wonder if it's over extrusion causing additional oozing. Decent overhang though.

Post image
1.6k Upvotes

r/FixMyPrint • • Oct 22 '25

Fix My Print Why is everything printing so much smaller

Post image
1.5k Upvotes

What's happening. I have tried updating and restarting. Nothing works first time after hundreds of prints


r/FixMyPrint • • Aug 20 '26

Troubleshooting My poor benchy

Thumbnail
gallery
1.5k Upvotes

Im struggling to get my ADIMLab Gantry-s dialed in. This is my best benchy so far. Unsure to why the print is shifting. Lines are wobbly and overall the print is not very uh good. any help would be greatly appreciated.

Using PLA rated for 210 my extruder is at 205 bed is at 55. Slicing using Prusa.

Thank you!


r/FixMyPrint • • Mar 04 '25

Fix My Print What’s this single line on my model? Printed twice and line came out same on both…

Thumbnail
gallery
1.3k Upvotes

r/FixMyPrint • • Nov 06 '25

Fix My Print Why my filament is bleeding??

Thumbnail
gallery
1.3k Upvotes

Ender3 pro eSun milk white PLA+ 215c/60c I printed the red part earlier, after that I printed the grey (esun pla+), which was fine and clean. But the white pla bleeds some resin like stuff.

What can that be?


r/FixMyPrint • • Mar 16 '21

Helpful Advice The one trick doctors don't want you to know about stopping stringing

Post image
1.1k Upvotes

r/FixMyPrint • • Aug 24 '25

Helpful Advice Meme: the solution for most misprints

Post image
1.1k Upvotes

r/FixMyPrint • • Sep 14 '21

Fix My Print calibration cube came out weird, any advice?

Post image
1.1k Upvotes

r/FixMyPrint • • Oct 20 '20

Sometimes it isn't the solution.

Post image
1.1k Upvotes

r/FixMyPrint • • May 17 '21

Print Fixed Thanks for all the advices and help, I reach the sweetness of 1st layer heaven

Post image
1.0k Upvotes

r/FixMyPrint • • Dec 16 '24 Polished Silver Turd

Fix My Print Please help

908 Upvotes

r/FixMyPrint • • Mar 28 '21

Print Fixed Big difference after getting some advice on this sub. Slowing down to half speed made a big diference. Thank you.

Post image
887 Upvotes

r/FixMyPrint • • May 26 '21

Helpful Advice Tip: turn "fill gaps between walls" to Nowhere when using Cura. Made all the difference in my benchy.

Post image
859 Upvotes

r/FixMyPrint • • Jan 31 '26

Fix My Print 30 hour print failed at the end…

Thumbnail
gallery
857 Upvotes

Anyone know why this happened? I have a Bambu A1. First 28 hours were great and then after leaving it to finish for a bit, I came back to it saying it was completed and being in this state. Appears it just grinded the last few layers for whatever reason. It also made the supports towards the end really terribly and uneven. The printer was calibrated directly before this and the filament is dry. Anyone have any tips? Please don’t flame me lol


r/FixMyPrint • • May 30 '21

Discussion My wife just asked me if my printer could print anything but tiny tugboats. Almost got my settings dialed in.

Post image
850 Upvotes

r/FixMyPrint • • Dec 01 '20

Z-layer mechanical Issue observations

Post image
841 Upvotes

r/FixMyPrint • • Sep 08 '20

Hello guys help this little guy. He is over extruding and have little bit of stringing.

Thumbnail
gfycat.com
824 Upvotes

r/FixMyPrint • • Oct 29 '25

Fix My Print Can i strengthen my holes?

823 Upvotes

I can’t find the settings to make my holes have more walls in part of the print. Is it possible?

Look at the video and you might understand better. I want the wall thickness in the bottom of the holes to be equal to the top holes.

I know I can change the total amount of walls but that’s not a good fix.

Can you help me?


r/FixMyPrint • • Nov 22 '21

Helpful Advice I made this image explaining to a friend how layer heights affect overhang capabilities.

Post image
822 Upvotes

r/FixMyPrint • • Mar 29 '20

Asking for help... and how to actually get it

Post image
774 Upvotes