r/FRT_World • • 7h ago

Troubleshooting What am I doing wrong here

Thumbnail
gallery
4 Upvotes

Got an AS designs arc v2

Installed in an H&R M16 lower

Using H2 buffer

Using cut trigger supplied by AS designs

Read that the higher shelf may be preventing the trip bar from working, so I have milled away a little bit (seen in the picture)

Semi auto is fine, bit when switching to arc it fires one time, cycles, and then a dead trigger. I have light strikes on the round in the chamber that doesnt fire.

Im assuming the hammer is falling too early which is why I am getting light strikes. Is this fixable with a heavier buffer or do I need to take more out of the shelf?


r/FRT_World • • 12h ago

Troubleshooting Triggered Company Wrangler SOLVED ISSUE WITH ZPAP’s MUST READ FOR OWNERS.

Post image
20 Upvotes

Not sure if anyone saw my post yesterday I couldn't get 5 different paps to function well low and behold use your original safety selector... the one included is squared on the end where it inserts into the whole / retainer plate, the pem zastava one is round all ik is the trigger is smooth and easy
to press and lots of fun!


r/FRT_World • • 1d ago

Show-N-Tell my new TX22 competition SCR build, looking for some tips on whether or not you guys use light dry lubrication. on your ammunition, or if it is redundant ?

Post image
10 Upvotes

r/FRT_World • • 1d ago

Hightower Armory 10/22

Post image
8 Upvotes

What’s up yall! I’m wondering if they make an frt that would work with this setup. Thought it would be a neat toy.


r/FRT_World • • 1d ago

Troubleshooting Tuning

3 Upvotes

Cannot figure this out it’s my first frt. functions as a regular trigger but does push back just not far enough to reset when I put any kind of actual force into the trigger pull


r/FRT_World • • 2d ago

Show-N-Tell M&P 2.0 is butter🧈

17 Upvotes

Put 400rds in her today ,no malfunction or issues, I really understand why people say it’s one of the best handguns to frt of course other than the tx22


r/FRT_World • • 2d ago

MR556 upper on non-HK lower, FRT/SS?

Thumbnail reddit.com
1 Upvotes

r/FRT_World • • 2d ago

Is there an FRT compatible with the RETAY 15/22

3 Upvotes

Retay RA1522, .22 LR, 8.00" Threaded Barrel, 25 Rds, Folding Pistol Brace, Black
I am looking for FRT for retay ra15/22
Is there any one know where can I get it from and or dose the retay take an frt


r/FRT_World • • 3d ago

What’s my first pick for super safety or frt?

Post image
6 Upvotes

This will be my first one. Super late to the party.


r/FRT_World • • 3d ago

Iso 3 position kit for Og Rarebreed.

0 Upvotes

r/FRT_World • • 4d ago

Caught them while on sale 🔥🔥🔥

Post image
4 Upvotes

r/FRT_World • • 4d ago

Help - random parts order

Post image
9 Upvotes

I fucked up and ordered from one of the worst companies ever

They sent me a mix bag with tx22 frt and some misc 10/22 parts

Can someone let me know what these go to?

Thanks


r/FRT_World • • 5d ago

Kabuto style ar frt with a CMMG 22 conversion bolt?

1 Upvotes

Would I need the adjustable bore buddy trip or would the standard trip cmmg offers work with it? With tweaking?

Are all the other parts really needed like the and bounce kit?

I mean the cmmg trip is like 45 with the weight

The bore buddy adjustable is 75 But the weight is much extra.


r/FRT_World • • 5d ago

Troubleshooting How To: Texas Triggers Diablo & PSA AK102

Thumbnail
gallery
5 Upvotes

How to make the Texas Triggers Diablo function correctly in a PSA AK102 chambered in 5.56:

You’ll need the transfer bar from Texas Triggers that more of a metal “band” other than the wire one the kit comes with.

After installing the trigger kit, do a function check to make sure the trip lever is functioning correctly. You’ll do this by bringing the bolt to the rear and slowing bring it forward until it just has enough friction left on the cocked hammer to where once you let it go it slams forward, hitting the front of the transfer bar and activates the trip bar to release the hammer.

If there’s slop between the safety lever and the trip lever, then the trigger may have enough slop to tilt the trip lever to the side and bypass it. You’ll need to add a small washer between the safety lever and the trip lever as seen in my photos.

If this still isn’t working, I would recommend purchasing a different trigger and trying again.

Other than that keep her sopping wet she’ll run like a top!

See my other post if interested in the clone Zenitco furniture!


r/FRT_World • • 5d ago

Anyone have one of these to compare the trigger mechanism to the TX 22?

Post image
17 Upvotes

r/FRT_World • • 5d ago

Troubleshooting SJ precision parts Glock 43x drop in

Post image
6 Upvotes

Anyone have any experience with these and getting them to run? It says on website trip may need filing. Mine did. Slide was hanging up etc... Got it filed down and now the spring that rides on top of the trigger in a little indent and under the trip keeps coming out. I also seen on youtube that some ran flawless out the box and others had to shave trip down and go to a 20-22lb spring.


r/FRT_World • • 5d ago

Show-N-Tell Atrius X Series in MPX

10 Upvotes

I got to test the x series frs today. I have a gen 2 mpx, that is an SBR with ILWT 8” tri lug barrel and adjustable gas block.

Modifications: The stock mil spec style sig trigger was binding so I ordered a schmid inside 3.5 gi trigger. I was weary of running an ar trigger, so I measured everything and decided to use the schmid trigger bar, oem hammer, disconnector and bridge. And voila, no binding. I did a test fire today and wow.

This was with 115ge magtech. No trigger slap.

Pardon my form.


r/FRT_World • • 6d ago

Frt help

1 Upvotes

I have a psa rock 5.7 compact, I found a company that makes an FRT/FRD for the full size version. I been looking everywhere and can’t find if there’s an FRT/FRD for the compact, does anyone have any knowledge that would help? Or know if that one would fit the compact?


r/FRT_World • • 6d ago

NFA SUCKS!

Post image
3 Upvotes

I have a JTS MAK12T1 12ga with a .947 od barrel currently cut to 14". Need a comp external thread cut and if available at least a 2 chamber comp close in diameter. Going short so under 3" added length. I have seen some for Saiga and VEPR units that are good but not chambered just straight with cuts. Will be shooting 00 and slugs. Any guys good with the barrel and receiver assembly? No idea if they can be separated. Current lead times, shipping charges if any, and suggestions for a brake all appreciated. Would like to keep things as affordable as possible. Addendum, anyone know of a recoil buffer pad other than tha MARS? With free or at least reasonable shipping? Thanks!


r/FRT_World • • 6d ago

Show-N-Tell Stark80 FAPS-47(D)raco

0 Upvotes

When it comes to AK reset trigger compatibility, the gold standard has already been set by Stark80 for delivering one of the most trusted, highly recommended, and versatile AK Super Safety kits available.

How ever one question kept coming up, again and again:
“Does it work on the Draco?”

Today, we address that with the FAPS-47(D). Built around continued development, and our commitment to American design and manufacturing.

Stark80.com


r/FRT_World • • 7d ago

LARUE MBT

Post image
4 Upvotes

I’m sure this has been asked before but they’ve since updated the part?? Anyone running the takedown tools kabuto MBT, if so may I have feedback or tips and your overall experience thus far. I don’t want to grab one if it takes a lot of hassle to fit and run properly. Some tuning is fine with some help, I wanna run it in my sage Rocco k9 with my Vltor a5 gas system. thanks and god bless!


r/FRT_World • • 7d ago

Troubleshooting Partisan vs. Rarebreed Quality Issues

Thumbnail
gallery
19 Upvotes

So luckily I caught the pin on my Partisan Disruptor walking before I was at the range or in an emergency. I’m going to loctite the rare breed before this causes a major issue. This could have gotten caught in bolt action.


r/FRT_World • • 7d ago

FRT help

Thumbnail gallery
1 Upvotes