How to make the Texas Triggers Diablo function correctly in a PSA AK102 chambered in 5.56:
You’ll need the transfer bar from Texas Triggers that more of a metal “band” other than the wire one the kit comes with.
After installing the trigger kit, do a function check to make sure the trip lever is functioning correctly. You’ll do this by bringing the bolt to the rear and slowing bring it forward until it just has enough friction left on the cocked hammer to where once you let it go it slams forward, hitting the front of the transfer bar and activates the trip bar to release the hammer.
If there’s slop between the safety lever and the trip lever, then the trigger may have enough slop to tilt the trip lever to the side and bypass it. You’ll need to add a small washer between the safety lever and the trip lever as seen in my photos.
If this still isn’t working, I would recommend purchasing a different trigger and trying again.
Other than that keep her sopping wet she’ll run like a top!
See my other post if interested in the clone Zenitco furniture!