r/EngineBuilding • • Aug 08 '25

Obscene

1 Upvotes

This post will be removed by the Mods. I have no issues with that.

I just wanted to vent about the absolute and obscene stupidly and ignorance that is displayed in this sub every weekend.

Where do you people come from?


r/EngineBuilding • • Mar 27 '24

Other What's the difference between the 2?

Thumbnail
gallery
1 Upvotes

r/EngineBuilding • • Jun 12 '24

Cylinder head builder ground into the water jacket while porting. Who’s responsible for the repair?

Thumbnail
gallery
23 Upvotes

In this situation, I was grinding on a head and was pushing the limits of the casting. One exhaust port had corrosion issues, so I opted to grind everything out and weld up the hole and modify the shape of the water jackets. The client was charged for the extra time to repair the hole, reshaping, as well as extra expense of sending the casting out to be impregnated with ceramic epoxy to seal/prevent leaks. The way I saw it, is that’s the nature of porting and working on older heads. It’s not my fault the casting was rotten, therefore needed to be repaired partway through the job. What would you have done? What’s your point of view? It’s been months now at this point, but I wanna say the labor bill was over $5000 on this, just for reference :)


r/EngineBuilding • • Mar 28 '26

Update on potential rod knock

0 Upvotes

After pulling the timing over. One of the tensioners seems has a little bit of play(driver side) while the other has no play at all. Could this cause the loud knocking that happens on start up? Since it goes away after a second or 2.


r/EngineBuilding • • Oct 24 '25

Why is it so hard to design heads that “flow well”?

0 Upvotes

Many NA engines loose power at high rpm because they can’t get enough air. Why is it hard to design a tube that leads to the intake valves? Could you just have them open to the air directly above the cylinder?


r/EngineBuilding • • Apr 23 '25

Multiple Rate My Work

Thumbnail
gallery
11 Upvotes

Posting this because somebody on my other post thinks it's my first rodeo.

Some added cat hair to trigger dat trol.

Rate my work?

VW Head, and not my 1st, for sure not the last. This is not a race car, this is for street with more efficiency, end goal more reliability, with more on tap than before.

Lol.


r/EngineBuilding • • Apr 16 '25

Want to clean head but want to keep factory crosshatching...

Post image
1 Upvotes

r/EngineBuilding • • Jan 17 '24

Toyota Ok ok hear me out...08 camry engine swap.

0 Upvotes

I have an 08 camry it is my first car, it's approaching 200k and I want to turn it into my first project car. The biggest thing I want to do is engine swap it. I have the 4 cyl and my first thought was to either swap it with the most recent camry 4cyl or grab something from Lexus for a bit more performance. Ultimately I have no clue I've never looked into engine swapping but I think it'd be cool. It's a project so I have no problem spending well over the car's worth. I just need ideas.

What do you guys think? Any recommendations?


r/EngineBuilding • • Apr 21 '25

The rasta is here!

Thumbnail
gallery
1 Upvotes

r/EngineBuilding • • Jan 28 '26

Trying to beef up a 92 Ranger 2.3l 5 speed, looking to double the base stats, so ~200whp ~260tq without boost or as close as I can get with the stock block. Any thoughts (besides buy a different vehicle) would be appreciated

4 Upvotes

r/EngineBuilding • • Feb 09 '26

SBC vs BBC vs LS what's cheapest

3 Upvotes

Hey all,

I'm 16 and looking to get my first car soon. I want a V8, specifically either a SBC, BBC, or LS. Since I'm just a high school kid, my budget isn't crazy. I just want to know what platform would be cheapest to get 400-500 HP N/A out of for a daily. I am willing to do a head and cam swap for more power, but I don't want to go much further than that as I have never worked on cars before. I own and fix my dirt bike, and I have fixed and sold small engines many times before. I have watched tons of videos on engine builds, DOD/AFM deletes, all the LS intakes and heads, the different transmission models, etc so I have knowledge on the subject. Again, I just want to know what's cheapest for 400-500 HP N/A, built or not; BBC, SBC or LS.


r/EngineBuilding • • Nov 17 '25

Should I send it?

Post image
1 Upvotes

r/EngineBuilding • • Aug 03 '25

HONING TOOL BROKE! will this be enough for new piston rings? or should i get a ball hone? ALL ADVICE IS APPRECIATED

4 Upvotes

r/EngineBuilding • • Nov 12 '25

reputable machine shop for a performance valve job that isnt $1500

0 Upvotes

edit: called livernois, got quoted $750 for a inspection & cleaning, performance valve job(5 angle intake and radiused exhaust), valve recon and to have the valve job blended in. Yall higher than eagle pussy.

Ive got a set of promaxx shocker 4.6 2v heads I need to get the 5 angle intake and radius exhaust valve job redone on. The issue is that all of the shops local to me only do 3 angle valve jobs as there, "performance valve job" option and when asked what there standard valve job is they have stated they just rework the 45 and make sure the guide isnt fubar.

And Im not really looking to send it back to promaxx, as they are not known for there attention to detail when it comes to there valve work.

Currently, the only shop I can think of that specializes in modulars that also takes on machine work is livernois and they list there recondition special at $1250 which includes teardown inspect, standard VJ, blending, Recon valves, deck, clean & assemble and thats just there standard valve job, not there performance one.

So if anyone knows of a shop with experience with 4.6 2v heads that can do a 5 angle and radius cut on there valve jobs that is less than say $1500, Im all ears and looking for suggestions.

realistically, the heads need like .015 decked off, the valves need touched up and the stems pollished, the other standard valve job fair and the valve job blended in the throat at a minimum and the top cut ideally.


r/EngineBuilding • • Jun 06 '23

Engine Theory I've accepted I'm not gonna be buying my first car... Anyone got a guide to building one from parts?

1 Upvotes

I'm broke with no family. I'm not afraid to put in the work, I just wanna know what I'm doing.

I know it's a daunting task. I know no sane man would set out on this journey. But I'm insane, and I live on the edge of destitution.

So give me your best advice, cuz I'm doing this.

Price estimate?


r/EngineBuilding • • Dec 16 '23

Other Bought a used cam off ebay and this small nick wasn't in any of the pictures, is this cam safe to use or need to be repaired?

Post image
3 Upvotes

r/EngineBuilding • • Oct 16 '23

I bought a truck! It won't roast the tires >:(

6 Upvotes

Howdy, I'm the proud new owner of a 2012 Silverado Z71 4x4 with a 5.3, 3.42 gears and the posi Trac, or limited slip, or whatever exactly it is that chevy calls it these days. However, even with traction control and stabilitrac turned off on SOAKING wet roads, it will not for the life of it light up the rear tires in 2 high. I barely got the rear end thrown out on a gravel road and still got a "whoa nelly" light on the cluster with all of the previous disabled. This could be a repeat thread and my true mechanical knowledge is broad, but lacks depth. What do I need to do in order to roast these (already close to slicks) trail guide tires off?? It's a winter beater, so lectures about burnouts being irresponsible are missing the point entirely. I wanna send this ol thing through mud, snow, and tears and have a grand time doing it. What gives?


r/EngineBuilding • • Jul 27 '26

Engine starved of oil

0 Upvotes

My oil drain plug came off on the freeway. Drove to the closest exit to turn off engine and was able to get oil back in the engine to drive back home. However, the damage has already been done and now I have an engine knock. Took to dealership to see what they had to say and yeah my Cylinder 2 is knocking and they said there is no way to fix it, I have to replace the engine. I'm actually a pretty decent mechanic (minus putting myself in this situation by forgetting to torque my drain bolt) but I've actually done engine swaps and head cover gaskets before. Is it true that my engine is just totally done? Can I just replace the cylinder and the head?


r/EngineBuilding • • Dec 03 '24

Help getting into engine building?

0 Upvotes

I’ve always wanted a c4 since I was a freshman in high school I was finally able to get one and was lucky enough to find a 92 lt1 with a 6 speed it already has headmen headers a lunati cam 1.6 roller rockers ls style springs keepers and retainers also chromoly pushrods 24 lb fuel injectors 7/16 studs and guide plates a 52 mm throttle body a cold air intake and an aluminum flywheel I know enough about engines to understand the functionality of these parts separately but I know motors can be very picky with just small part changes as far as air flow and exhaust part tolerances etc I’d like to get a crisp crackly nascar kinda sound but I’m not sure how I’d go about it are these good mods thst I have? How much of a hp gain from factory do you guys think I already have? Also anyone care to guess the specs on my cam I know that has a lot to do with things and different builds


r/EngineBuilding • • Dec 22 '25

Unsticking pistons

0 Upvotes

I've watched numerous YouTube videos of guys unsticking pistons by pouring whatever their preferred magic elixer is. They all pour them down the cylinder through the spark plug hole. Wouldn't you get more coverage by pouring it down the intake manifold? Just a thought.


r/EngineBuilding • • Aug 24 '21

Engine swap question

1 Upvotes

I just came across a 1987 toyota mr2 and its in pretty good condition and for a reasonable price. I was wondering if it was possible to put a hellcat or viper engine in it (i was also thinking of cutting the back trunk out to give it more engine bay room too). I wanna see other peoples opinions on this, or if you have any better alternatives to swap it with, i love the sounds of v8's.


r/EngineBuilding • • Sep 12 '23

What is the point to have a twin v8 engine

1 Upvotes

I just want to know why people put twin v8 engine in cars


r/EngineBuilding • • Aug 19 '25

Can I replace 2 pistons with ones from the scrap yard?

0 Upvotes

I got two dinged up pistons I’m thinking get two pistons from the same exact spot in the engine, install in correct orientation with the old rings and good as new? My pistons have a gnarly gauge from dropped valve seat and although not a big deal it will probably work just fine I honestly don’t want that gouge there.


r/EngineBuilding • • Jun 07 '25

Chrysler/Mopar Is she cooked?

Thumbnail
gallery
0 Upvotes

Bought a Cuda with a 440, drove it a few miles had a knock around 3k rpm. Opened up the oil filter. Bits of metal and rubber. What do you think?