r/DCGuns • • Apr 12 '24

Successful Registration of Self-Manufactured Firearms {with guide}

Post image
113 Upvotes

I commented a few weeks back on a post about the process for self-manufacturing firearms in the District of Columbia. I said I’d update when I finished the process, and as of today it is complete! I heard a lot of contradictory information when I was trying to figure it out. As far as I know, I am either the first or one of the first people to successfully register a self-manufactured firearm in the District.

So, as promised, here’s the skinny.

TYPE OF SELF-MANUFACTURE

Under federal law, the receiver is (usually) the part of the firearm that contains the trigger mechanism; all the other parts are unregulated and can be obtained without any special steps, and so people who want to self-manufacture just produce the receiver themselves and buy the rest of the parts. (It’s also possible to produce almost all of the actual firearm by additive manufacture, but that is much more complex and outside the scope of this post.) There are three (primary) ways of self-manufacturing a firearm: milling/drilling a receiver blank from a company like Polymer80, 3D printing a receiver, and CNC-milling a receiver out of aluminum stock.

Polymer80 is prohibited from selling or shipping receiver blanks into the District, and it is illegal to buy or sell any receiver blank inside the District, but it is perfectly legal to purchase a receiver blank outside of the District and then bring it in yourself to self-manufacture. They are rather difficult to come by these days due to crackdowns from the DOJ, and they are quite expensive where you can find them. CNC mills are entirely legal but even more expensive. This leaves 3D printing, which has a high barrier of entry (3D printers are very powerful but not exactly plug-and-play with precision designs like firearm receivers). I 3D-printed both the firearms I self-manufactured after purchasing a 3D printer for other reasons and becoming familiar with its operation.

Generally, self-manufacturing ends up being more expensive than just buying a gun outright. But here in DC, where we need to pay $120 just for the transfer, self-manufacture can be cheaper. It certainly was in my situation (the cost of the printer and the filament I used for the two builds was far less than paying two transfer fees).

BASIC RULES

The DC Council amended the Code to provide for self-manufacture registration after Heller’s 2021 ghost gun lawsuit (although it doesn’t appear he ever actually went through with registering his Polymer80 pistol). The relevant sections are DC Code § 7-2502.06(c) and § 7-2502.02(c), with the latter setting serialization requirements and the former providing that a self-manufacturer must apply for a registration certificate “within 5 business days after completing manufacture”. The law does not define “completing manufacture” but for my own situation I took it to mean the day when I completed the assembly of a functional firearm. There’s another possible argument here: they could claim that it means the completion of the receiver itself, not the entire firearm. But since you need to provide details like barrel length with the registration application, it seemed like functional completion made more sense.

The code calls for serialization matching federal standards for imports. While some states require serialization to be done by an FFL on metal, MPD doesn’t seem to care. I programmed the serial numbers I wanted into the CAD files for my 3D printer and just did it that way, and said so, and MPD accepted it. On that note, the “serial number” is supposed to be your first name, your last name, “DC”, and a 2-5 digit number you choose. The code says that you have to contact MPD in advance to confirm that a desired serial number is available, but because the full name is supposed to be included in the serial number value, it is almost certain that your number will be unique already. I emailed them a bit in advance and they were very confused but eventually confirmed that the numbers I chose were unique (again, this was inevitable because obviously no one with my name has ever attempted to register a self-manufacture).

They ran into a bit of a snag on this part (poor planning from the Council — imagine that!) because my full name plus DC plus digits was far too long to fit in their computer system, let alone fit on a registration certificate. So my registration certificates only have my first name, plus DC and the numbers I chose. The fact that they didn’t figure out this issue before seems to suggest I really am the first person to go through it.

THE PROCESS

I selected the firearm designs I wanted to print, ordered the other parts from willing dealers (it is entirely legal to have gun parts shipped to your door in DC but not all companies will ship here), calibrated my printer, and started printing. As noted above, I put the serial numbers into the CAD files. Once finished, I filled out two copies of the PD-219 form, putting “N/A - self manufacture” wherever it asked for information I didn’t have. I did not fill out the Used Firearm Addendum.

Just because you can print your own firearm doesn’t mean you can print any firearm. For pistols, DC will only allow registration of pistols that are on the MD roster, so I chose a Glock 43X and put that information down on my application. The “make” on the reg cert was “GLOCK INC.” (probably because that’s what they had available in the drop-down, I believe I listed it as “Glock clone”) and the model was listed as “43X”. For the rifle, it’s a feature test. I did the UBAR2 AR-15 design and listed the make as “MSR receiver” (“MSR” meaning “modern sporting rifle”) and the model as “UBAR2”, and that was reflected on my reg cert. I noted under “identifying marks” that it was a fixed-magazine design; they accepted this without incident or further concern. I’m not sure if they just didn’t care to follow up about the specific fixed magazine configuration or if they recognized that my ability to 3D-print stuff means I can do it however I want anyway.

When I went for my reg appointment, they expressed some confusion over why I wasn’t going through one of the FFLs, and I had to explain a few times that it was a self-manufacture. They ultimately accepted it, though. They had me fill out a few additional forms that I hadn’t done before, but I think this is a change to their background check process and had nothing to do with the self manufacture application.

OTHER ISSUES

I already have my CPL, and MPD confirmed to me today via email that any handgun added to your registrations is automatically added to your CPL. Useful because I had gotten contradictory information previously.

I would absolutely NOT advise making your first firearm in DC a self-manufactured firearm. I already had three registered firearms, so I could already possess ammo and there was no issue with obtaining parts. And when MPD ran my background, there was no possibility that they would ultimately deny. If your first gun is a self-manufacture and you get a denial for some unexpected reason, then MPD could make a stink about whether it’s legal for you to possess the gun that you created yourself in the interim period. Not worth that business.

At the appointment, MPD seemed really confused about why I wasn’t going through one of the FFLs. I dunno whether that’s what they expected people to do for self-manufactures or not. But they let me do it. Obviously if someone wants to self-manufacture, they will, so you should let them register properly.

There’s no guarantee that YOUR self-manufacture will go the same way that mine did. This is not legal advice and while I’m definitely a lawyer I’m also definitely not your lawyer, not unless you hire me. This is just my statement of how it went for me.

If you have any questions, let me know!


r/DCGuns • • Sep 14 '22

DC REPEALS 20 ROUND CARRY LIMIT!

Thumbnail
twitter.com
98 Upvotes

r/DCGuns • • Mar 06 '26

DC Court of Appeals (the highest local court in the district) has ruled that DC's ban on magazines over 10 rounds violates the 2A

Thumbnail
x.com
74 Upvotes

r/DCGuns • • Aug 21 '25

Got pulled over last night

71 Upvotes

After reading the previous post about the individual who had his firearm confiscated, I was pulled over last night as a passenger in my home boy’s car. His vehicle tags were expired.

The US Park police pulled us over on Pennsylvania Avenue SE (I’m not sure if that’s within their jurisdiction). They approached my side of the car.

He informed us that he had stopped us for expired tags. I immediately informed him that I was licensed and carrying a firearm. He asked me where I was carrying it, and I told him in my appendix. I provided him with my ID, and he asked me to step out of the car. Then, he took my firearm to confirm.

After about five minutes, another car pulled up. The officer returned, and his colleague thanked me for following the proper procedure.

However, they then proceeded to recruit me to join the park police. This resulted in me engaging in banter, pushing, and joking with three of them for about a minute. I had to yell at the officer who arrived late to the scene to get his flashlight from my backseat. I was serious about it, and we all started laughing. (If you arrive late to the scene, don’t be searching for anything, and you also shouldn’t be looking in my backseat for a dead tag stop, lol.)

In summary, make sure to immediately inform them that you’re carrying a firearm. While it may have been helpful that I’m an officer in the Army, it’s still important to be aware of the laws.


r/DCGuns • • Jun 30 '22

Dick Heller is challenging D.C.'s limit on the amount of ammunition a CCW holder may carry

Thumbnail
twitter.com
69 Upvotes

r/DCGuns • • Jun 05 '26

After 90 days I successfully appealed my denial

Post image
63 Upvotes

On March 5th I submitted an application to register a lower receiver for a featureless build. Needless to say it was denied for barrel length issues(not sure what happened there). Anyway, I didn't know why it was denied until this week. I have been calling almost every week and even went in for in-person visit. Nothing helped. Noone was giving me a straight answer on why it was denied, and no denial letter was sent. I made 12 phone calls, 2 emails and a couple of in person visits. Everytime I called I was told they'll send it out but they didn't.

Anyway, I went in this week and asked for the reason and they told me it was the barrel length. And also the nice lady at the counter didn't even know what a lower receiver is. She kept asking me "what does this attach to?". I kept explaining the lower receiver IS the firearm but she couldn't get it. After a long discussion and going over the city code/law on the AWB she finally got it. I was annoyed but I was glad she took the time to understand and learn about it, instead of giving me a packaged answer and sending me away. I'll take that over being sent away with nothing tangible.

They are now requiring pictures of the firearm now, so I went to g&d assembled the rifle took pictures and used gemini to create a nice info graphic cross referencing the law with the parts on my rifle, and voila I got the approval. I'm glad this long and confusing ordeal is over. I hope I never go through that again.

P.S - Thanks r/lawblawg for the help.


r/DCGuns • • Aug 24 '23

Police Advice: Carry a gun

62 Upvotes

As most of us here in DC know, there has been a rash of increased violence in the form of armed carjackings and robberies, mostly by youth in the city who have started to operate with impunity. I live in a medium-income neighborhood which had previously been considered pretty safe but has recently been subject to an increased number of armed robberies. MPD has increased patrols here and has begun posting officers in vehicles up and down the main neighborhood road in the evenings.

I stopped and talked to one for a few minutes the other night and asked him for his take on the situation.

He said it's...not great. Investigation of armed robberies takes place exclusively by detectives, who handle matters generally across DC rather than being assigned to a particular ward. On the one hand, this makes sense -- the robberies are being committed by groups with high mobility who operate all over the city -- but it means there is very little coordination with locally-posted officers. These groups are becoming extremely brazen and increasingly violent. He told me about one middle-aged Hispanic homeowner in my neighborhood who was out weeding his front yard when three kids rolled up and tried to rob him at gunpoint. He told them he was just pulling weeds and didn't have his wallet or any money on him and so they got angry and pistol-whipped him across the face.

I asked him what he thought of the solutions being proposed by the DC Council, like the youth curfew. He said it's useless and it's just the Council's way of pretending to do something when in fact they are clueless. He explained that the youth curfew won't have any impact on youth in vehicles (who are doing the majority of the crime) because they won't be stopping vehicles for curfew. He also explained that even when the problem kids are out and about, they will just run if the cops try to talk to them, and the cops aren't allowed to chase them. At best, there will be decent kids who admit that they are out too late, and then you end up with a cop giving a kid a ride home instead of being out and patrolling.

He also said that the push for red flag law awareness is equally useless, because the guns being used are already illegal guns, and legal gun owners aren't causing problems. He said his best advice to residents is to get a gun, learn how to use it, and learn to carry it. He added that if you don't want a gun, get a dog.


r/DCGuns • • Aug 22 '25

MPD blocking lawful firearm registrations

59 Upvotes

A lot of you know me here already. I’m a DC lawyer, and I’ve been active on this sub for several years. I try to answer questions about the legal side of gun ownership in the District. I originally got into guns and gun law because DC’s restrictions tried to block me from protecting myself when I actually needed protection. Back in 2022, I faced threats against my life and had to get a protective order — but when I tried to legally arm myself, DC used that case as a reason to shut me down. I took them to court and I won. That experience put me on this path. Since then, I’ve been both a plaintiff in federal court challenges and counsel for a number of clients on firearms matters.

Over the past couple of weeks, I’ve had multiple clients run into a repeated problem. MPD is refusing to accept registration paperwork for firearms purchased outside of the District when the registrant has dual residency or if the purchase was made more than 48 hours before the registration appointment. In these cases, people are being told they must surrender their firearms to an FFL and go through a transfer process in order to register them.

That is not the law. D.C. Code § 7-2502.06 is very clear: you must apply to register within 48 hours of bringing the firearm into DC. The date you established DC residency is immaterial. The date you purchased the firearm is also immaterial. You can legally own a firearm in another state for years, then move to DC and register it, so long as the application is filed within 48 hours of physically bringing it here.

For example, when I 3D-printed firearms for the first time in DC, MPD tried to convince me to take them to an FFL to “transfer” them before registering. I told them to pound sand. They backed off because I knew the law, but it’s clear they take the same posture toward others who don’t push back.

I’ve worked with both G&D and DCSA on my own registrations — both shops are solid — but there is no legal or practical reason to force someone who already lawfully owns a firearm to run it through an FFL just to satisfy a made-up hurdle. I’ve already prepared letters for multiple clients on this issue in just the past couple of weeks.

If anyone here has had MPD block or delay your registration because of the date of purchase or the timing of your move into DC, I’d like to hear from you. The more documented cases we have, the more pressure we can put on the Registration Unit to change its behavior — especially with federal scrutiny (for better or worse) happening right now.

Drop a comment or DM me if you’ve had a similar experience.


r/DCGuns • • Sep 10 '20

DC NAACP hosting a 'firearms information training' in tonight's meeting - interesting

56 Upvotes

I got an email from the local NAACP branch which I thought was extremely interesting. Tonight's meeting includes what appears to be an extensive period of time devoted to learning firearm safety, as well as learning the laws around firearm ownership in DC.
MPD's Chief appears to be involved. What's surprising to me is the language that is used in talking about guns. I'm used to all DC-centric discussions on guns as being negative. This isn't the case here. Perhaps the tide really is turning our way to some extent.
I'll cut and paste below:


NAACP DC HOSTS FIREARMS INFORMATIONAL TRAINING AT VIRTUAL GENERAL BODY MEETING

WASHINGTON, D.C. — The NAACP DC Branch Virtual General Body Meeting will be held on Thursday, September 10, 2020 at 7:00pm on ZOOM, featuring Guest Speakers: MPD Chief Peter Newsham, Director Delbert McFadden and Hardie Wilson addressing firearms safety, obtaining legal firearms and trends of illegal firearm related crimes in the District of Columbia. Since the start of the COVID-19 health pandemic, firearms sales have surged nationwide. Furthermore, social uprisings from the recent killings of black and brown people including, Ahmaud Arbery, George Floyd and Breonna Taylor have created unrest motivating many private citizens to obtain firearms for protection. Lastly, unemployment and limited access to resources increases crime and heightens the need for protection. Register here: https://us02web.zoom.us/meeting/register/tZwvcu-pqj8pE9Xb9WBdm-Sbu55gEOXLd_XQ

· Peter Newsham serves as the Chief of the Metropolitan Police Department (MPD). Newsham has served in MPD since 1989 and was appointed Chief by Mayor Muriel Bowser in 2017. DC previously had a ban on handgun ownership. Newsham oversaw the issuance of the first handgun permit by police in 32 years, following the ruling by the U.S. Supreme Court in DC vs. Heller.

· Delbert “Del” McFadden serves as the Executive Director of the Office of Neighborhood Safety and Engagement working to prevent violence and increase public safety through violence prevention, public health and community engagement.

· Hardie Wilson is the Founder of Wilson Brothers Armory, a Firearm Sales and Training Company, offering training on the proper use of firearms and firearm laws in DC, Maryland and Virginia. For more information, visit https://www.thewbarmory.com

For months, DC protestors have joined national movements advocating for “Black Lives Matter,” through policing reform, criminal justice reform, transparency and accountability. On September 2nd, DC witnessed the fatal shooting of 18-year-old Deon Kay by an Officer of the Metropolitan Police Department, after-which the body camera footage was released within 24-hours showing possession of an illegal firearm. Black communities across the nation are in pain and any fatal shooting of a Black man or woman is traumatizing. Transparency is critical to rebuilding trust between law enforcement and the Black community. Releasing this footage within 24-hours was a step towards fostering transparency and trust, but the residual unrest heightens tensions and impacts community safety.

Amidst the deadliest health pandemic of our generation, we have fights on multiple fronts. We also fight to value our own black and brown lives within our communities. Fear and unemployment contribute to increased crime, violence and unrest within our communities. Today, many individuals are seeking information, resources and training to obtain legal firearms for the purpose of protecting their property and families.


r/DCGuns • • Jul 20 '26

Are we next?

Post image
54 Upvotes

r/DCGuns • • Sep 10 '25

High-capacity gun magazines are illegal in D.C.- Trump no longer wants to prosecute violators.

Thumbnail
51st.news
51 Upvotes

r/DCGuns • • Feb 23 '25

The complete and total ban of firearms (even transporting) on Metro needs to be fixed

47 Upvotes

With this new administration we should strike while we can to remove the restrictions of transporting firearms on Metro. Then build upon that to allow CCW.

The idea I have to BUY A CAR to move my firearms in and out of DC is literally the case that got NYC in trouble. They eventually changed their law.

https://www.oyez.org/cases/2019/18-280

Someone needs to take this up, and take it up NOW


r/DCGuns • • Jul 21 '20

/r/DCguns is now public and open for posting again!

Post image
44 Upvotes

r/DCGuns • • Feb 13 '23

DC Friendly Ammo Companies

41 Upvotes

New post so this can get pinned and had some new companies to add.

Remember, according to MPD, it is legal to buy ammo online.

Some of these places require you to upload your registration info and some don't.

Velocity Ammo and Shaw Arms are the latest additions to the list.

Feel free to suggest any edits.

Ammunition Store (https://ammunitionstore.com)

MidwayUSA (https://www.midwayusa.com)

Velocity Ammo Sales (https://www.velocityammosales.com)

Shaw Arms (https://www.shawarms.com/)

White Birch Armory (https://www.wbarmory.com)

GT Distributors (https://www.gtdist.com)

Keen Dynamics ( https://www.keendynamics.com

LG-Outdoors (https://LG-Outdoors.com)

MidSouth Shooters Supply (https://MidSouthShootersSupply.com)

Simmons Sporting Goods (https://www.simmonssportinggoods.com)

TrueShot Gun Club (https://www.trueshotgunclub.com)


r/DCGuns • • Mar 23 '26

Magazine Ban Remains Precedent

40 Upvotes

​Checked the docket today, and what do I see but an order denying the District's motion to suspend precedential status.

To recap:

Tyree Benson got himself arrested for an unregistered gun and was convicted on a number of counts, including possession of a magazine carrying more than 10 rounds.

In a 2-1 decision, the Court of Appeals (DC's state supreme court) overturned all the convictions on the grounds that 10+ magazines are protected arms. The majority decision was written by a Trump appointee and joined by an Obama appointee; the dissent came from a Bush appointee.

DC immediately indicated it would ask for the case to be reheard by all nine sitting COA judges at once ("en banc"), and filed an emergency motion asking the court to "suspend" the precedential status of the opinion pending the rehearing. They claimed that if this decision went into effect, it would immediately start being cited in other cases and that could ruin a lot of their attempts to punish people for gun possession in DC.

Today, the court denied the motion, meaning that although the outcome could still be changed by rehearing en banc, it is good law until further order and can be cited as controlling precedent in other cases.

EDIT: I have to stress that this does not mean that standard capacity mags are now fully legal. There may be a stay of the decision pending appeal that I can’t see on the docket, and the decision could be stayed by the en banc court at any time. The law itself has not changed. But this significantly reduces the risk of prosecution.


r/DCGuns • • Sep 08 '25

Trump Civil Rights Head Applies for Firearm in DC

Thumbnail x.com
40 Upvotes

The head of the civil rights division at the DOJ has applied for a firearms permit.

She will know exactly how ridiculous the process is for everyday people.


r/DCGuns • • Oct 24 '25

US Moves to DISMISS DC Standard Capacity Magazine Charge

Thumbnail x.com
38 Upvotes

DC is moving to dismiss charges for those who were charged for having standard capacity magazine (I am not using the antigunners term)

Saying they would also not charge someone today.


r/DCGuns • • Feb 11 '26

pulled over but wasn’t carrying, officer said something very interesting

37 Upvotes

long story short pulled over for a violation.. i wasn’t carrying at all. officer asked did I have any weapons and I said no Im not “carrying”. I think that was the trigger word because he asked do i carry and i replied with yes.

we go through the dramatics “pat down, light vehicle search”.. checked safe in the back of the car… empty, no weapons. He takes my ccw.. and weapon registration and runs it…

now for the reason I’m sharing, he tells me to keep my weapon locked in a safe at home and he’s supposed to be calling me (haven’t recieved a call yet). He says my weapon is not popping up when he searches for it.. I tell him in a nutshell what am I supposed to do with that piece of info.. I’m still waiting on 2 firearm add ons… and my credentials are on my person

i cant help but think what would’ve happened if I was carrying that night. I was let off with a warning for the violation.. cool officer though, but my mind still wonders about this situation and my credentials...

- safe


r/DCGuns • • Jul 22 '26

Second Confirmed Mossberg Shockwave

Post image
36 Upvotes

I can now confirm that DC MPD has allowed Mossberg 590 Shockwave registrations to go through for at least two people, both clients of mine. The first was approved without issue; the second (u/style752) received an initial denial but I appealed and they reversed. Both were transferred through DCSA.


r/DCGuns • • Mar 09 '22

FPC magazine challenge

Post image
36 Upvotes

r/DCGuns • • Apr 28 '21

DC CCW permits up 2x

Post image
36 Upvotes

r/DCGuns • • Sep 22 '20

DC area joins nationwide trend of first-time gun ownership

Thumbnail
wtop.com
36 Upvotes

r/DCGuns • • Oct 13 '26

PSA: MPD's digital registration download button is fully built into the portal, they're just hiding it

Post image
35 Upvotes

Hey everyone,

Like a lot of you, I have been dealing with the massive delays caused by MPD stopping digital copies and forcing everyone to wait on physical mail. With only two printers running, waiting on physical cards is dragging things way past the 60-day statutory mark just to pick up a firearm (shoutout the Hi-Point C9 for being the cheapest way to see if you'll get approved).

While checking my approval status on the portal, I noticed something interesting in the source code of the approved licenses page.

The actual button to email or download your registration is fully built. They are literally just hiding it using a basic CSS property (display: none;).

If you want to see it for yourself:

  1. Go to your Approved Firearm Applications page.

  2. Right-click near your approved firearm row and hit Inspect.

  3. Look at the table cell and find the hidden button element with style="display: none;".

  4. Double-click and delete display: none;

  5. The hidden "Email" button pops right up on your screen.

(Note: Clicking the revealed button throws a banner at the top saying "Your license has been sent to your registered email address", but the backend script does not actually send the email yet).

Thought I would share this so people can see that the capability is built right in.