r/Creality • u/More_Tomato_1972 • 21h ago
Show Off Homemade anti-gravity decorative lamp
It can also be used as a base for other decorative items, as long as it's within the weight-bearing capacity.
r/Creality • u/Creality_3D • Sep 04 '26
Beyond Nozzles. Conquer Materials.
K3 is supercharged with KliTek™
🔹 4.8s nozzle changes
🔹 Multi-material in one
🔹 Up to 5x faster
🔹 Waste-free
Unfolds an all-new chapter in multi-color and multi-material printing.
r/Creality • u/Creality_3D • 3d ago
Hey makers! Day 1 of Formnext has officially kicked off!
Come see our giant 3D-printed miniature city! 🏙️
Come inspect the print details up close and chat with our team!
📍 Hall 12.1, D01
📅 November 17–20, 2026
📌 Messe Frankfurt, Germany
r/Creality • u/More_Tomato_1972 • 21h ago
It can also be used as a base for other decorative items, as long as it's within the weight-bearing capacity.
r/Creality • u/CrimsonException • 2m ago
Hallo, I’m new to 3D printing and my Creality K2 SE Combo has had a CFS issue since the day it arrived. The printer works perfectly with the external spool holder. I can load filament, extrude, and print normally that way. The problem only happens when I use the CFS.
On my first attempts, the CFS fed the filament all the way to the printhead, then pulled it back before any plastic came out of the nozzle. Later, it stopped grabbing the filament altogether. Now when I insert filament into the CFS, it does nothing.
Creality Print shows FB2864 — “Feed issue, filament buffer failure.” The buffer’s blue light is on. I recalibrated the printer twice and got the same result.
Has anyone fixed FB2864 on a K2 SE? Is there a simple way to tell whether the buffer, its cable, or the CFS feeder is causing it? I saw a K2 Plus owner mention that rolling back firmware helped with different feed errors. I’d appreciate any K2 SE-specific advice before I try that or ask the seller for a replacement.
r/Creality • u/Smooth_Main_1211 • 2h ago
Today, my friend and I received the latest update. We both have K2 Pro combo printers, and today we both started experiencing clogging and CFS issues, and my nozzle broke while I was cleaning it. Now I’ve had to buy a Hotent kit as well. I’m starting to regret this brand and this printer.
r/Creality • u/Super-Campaign-9141 • 2h ago
Hello newbie here
Buy i7 now or wait for i8 ??
How does the kick starter program for I8 work - can i buy and I8 now ?
It seems the campaign is closed/finished
When will it reopen or be for sale direct ?
Thanks
r/Creality • u/Afraid_Adeptness_841 • 13h ago
My SparkX i7 kept heating PETG to 270°C during filament changes, despite having my OrcaSlicer profiles set to 250°C max. This caused poops to stick to the nozzle and be transferred onto the bed. While the temp tower ended up catching most of the rogue poops, I did not want to risk ruining a multiple-hour print because of this silly problem.
After rooting the printer and checking Klipper logs, I discovered the CFS Lite uses its own material database, which can override slicer temperature settings.
The fix:
The files are located at:
/mnt/UDISK/creality/userdata/box/
I changed these values to 250°C:
material_database.json → CR-PETG → base.maxTemp
material_database.json → CR-PETG → kvParam.nozzle_temperature_range_high
material_box_info.json → CFS slots A–D → maxTemp
material_modify_info.json → CFS slots A–D → maxTemp
After restarting, both startup and mid-print PETG purges were running at 250°C instead of 270°C.
I also created a restoration script in case Creality resets the settings.
Warning: Requires root access. Back up your files first, and verify the material entries because database layouts may vary by firmware. I am on the latest V1.1.5.10 and CFS V.0.5.4 . Don't change hardware temperature safety limits.
Hopefully this saves another SparkX i7 owner some troubleshooting!
Happy to share the restoration script if anyone needs it.
TLDR: SparkX i7 CFS Lite was purging PETG at 270°C despite OrcaSlicer being set to 250°C. Rooted the printer and discovered Creality's internal material database was overriding the slicer. Changed the CR-PETG maximum temperatures and CFS slot settings to 250°C. Restarted, tested, and confirmed the fix works for startup and mid-print purges.
Also: I'm a noob. Used AI to help me with my "discoveries."
r/Creality • u/Venterrazero • 6h ago
Hi there,
I have my K1 max since 2023. About 4 months ago my extruder started to unlock itself mid print.
I looked into it disassembled the extruder and found a busted ball bearing. Looked online and saw metal replacement gears and thought "Oh neat" and bought them. About a week ago the extruder started to unlock itself again. I guess since there are a few upgrades revisions and what not made to the K1 series I might switch out the whole extruder.
Looked and found a complete extruder assambly with motor. But it says not to use it without a unicorn nozzle. So looked up wth that unicorn nozzle is. So it appears if I want to switch my old extruder for a new one I have to switch the whole hotend too.
I've seen that there seems to be a new pcb for the print head as well that seems to have some kind of new~ish connectors. So it looks like I have to swap that too.
So far it appears that if I want to upgrade my old extruder for a new one I have to swap the Hotend and the PCB too. Is that right? Am I missing something here? Is there maybe a complete Upgradekit? I am a bit puzzled that those parts seem to be interlocked but there is no direct Info of what has to be upgraded.
Can someone help?
r/Creality • u/zemlin • 11h ago

I print parts from ABS, PC, HIPS, ABS-GF, and more. Some of my parts are only a few mm thick, so lack of a heated enclosure is not a problem - it's still heated by the bed.
Is there a switch somewhere to eliminate this limitation in the material selection both on the machine and in the slicer? This is just stupid.
The machine is worthless to me if I can not print other materials. I run a manufacturing operation and I'm not willing to call everything PETG and create spoofed profiles just so I can run a compromised machine.
r/Creality • u/fifindr • 20h ago
I designed this little drill attachment to make winding up ratchet straps a lot quicker and easier.
Just put the end of the strap between the two prongs, attach the tool to a cordless drill, and slowly spin it to roll the strap into a neat coil. No more spending ages winding up long straps by hand.
It takes around 15 minutes to print and uses only 13g of filament. A pretty small print for something that can save a lot of hassle!
Creality Cloud -Ratchet Strap Winder From fifindr https://www.crealitycloud.com/model-detail/ratchet-strap-winder-tool
Hope you like it!
r/Creality • u/Together_3D • 16h ago
If you play ttrpgs or wargames, you probably know the pain of "terrain creep" - you’re in the middle of an intense combat encounter, someone reaches across the table to move a miniature, and the entire set piece or wall shifts two inches to the left, ruining the grid layout. (And it’s not always the Barbarians …)
So after our first battle D&D session with sliding terrain. We decided on using the OpenLOCK system for our terrain tiles.
One variant we were looking for but couldn’t find, was a grassy texture for a town or forest.
So that is why I created the grass hedge set. So we could create a forest by adding some simple trees, or make a full hedge maze where players would encounter different things.
Some good, some…. less so 😂
I really like systems that are 100% 3D printable and modular. So that we can use them again and again.
Check out the full set here:
Tiles https://www.crealitycloud.com/model-detail/wooden-fence-openlock-3d-model
walls: https://www.crealitycloud.com/nl/model-detail/hedge-wall-tiles-openlock-system?profileId=69d6a06cb6ae4cc0a32c570c
corners: https://www.crealitycloud.com/nl/model-detail/hedge-corner-tiles-openlock-system?profileId=69d6a19716f25cd6b23be482
gates: https://www.crealitycloud.com/nl/model-detail/hedge-arch-functional-gate-openlock-system?profileId=69d6a2de16f25cd6b23bf0be
Fence: https://www.crealitycloud.com/nl/model-detail/wooden-fence-grass-tile-openlock?profileId=69d6a474b6ae4cc0a32c7ea0
Fence opening: https://www.crealitycloud.com/nl/model-detail/wooden-fence-opening-openlock-system?profileId=69d6a55c16f25cd6b23c0adf
r/Creality • u/ImGirlan • 15h ago
I'm having a persistent clogging issue with my Ender-3 V3 KE, which is now equipped with the Unicorn hotend, and I'd like to know if anyone has experienced something similar.
The strangest part is that after cleaning the nozzle, loading the filament, and performing a manual extrusion test, everything works perfectly. The filament comes out smoothly and consistently, with no signs of obstruction.
However, as soon as I start a print, the problem appears almost immediately. The nozzle clogs during the purge line or within the first few layers of the print. Filament flow suddenly decreases significantly or stops completely.
I've already adjusted the Z-offset, and the bed leveling is in good condition, so I don't think these are the main causes.
Another strange behavior I've noticed:
Some clogs seem to happen during very small retractions. For example, when the nozzle finishes an infill section and moves to another area of the print, it sometimes leaves tiny, random blobs of filament on the surface, almost like little marks.
I have a feeling that something happens during these small retractions or filament movements that causes an obstruction. Sometimes, even this tiny movement seems enough to interrupt the filament flow completely.
What's especially frustrating is that manual extrusion works perfectly, but the printer fails as soon as an actual print begins.
What I've tried so far:
- Cleaning the nozzle and hotend.
- Checking and adjusting the Z-offset.
- Bed leveling.
- Manual extrusion tests, which produce perfectly normal results.
Has anyone using the Ender-3 V3 KE with the Unicorn hotend experienced this kind of issue?
Could it be related to retraction settings, temperature, flow rate, or perhaps something wrong with the hotend installation?
I'm open to any suggestions because I'm running out of things to try!
r/Creality • u/Geoff_Bedlam_The3rd • 12h ago
r/Creality • u/maclacjc • 13h ago
I am rather new to 3D printers but am generally comfortable with computers. I am trying to help my son create 3D models of his family (for Christmas presents) so I started trying to use Magic3D which did a nice job overall with the SLT files. Of course he would like some colour variance (he is a kid) so I have tried 3MF files but they always come out as a single colour.
Is there a posted workflow somewhere for image to model? Sorry if it is obvious, I looked, I swear!
r/Creality • u/backfrombanned • 14h ago
r/Creality • u/Downtherabbithole-14 • 20h ago
I just ordered the Creality Spark i7 Autofill. This is going to be a new hobbie for myself and two kids (11 and 7). I am trying to get familiar with the app. Is there anything I should know? My biggest concern is maintenance - after a print (or several prints) is there a certain way to shut down the printer? I plan to use the app - but is it better to use a laptop to send the file to be printed?
r/Creality • u/ZeligD • 16h ago
I can’t seem to find any UK sellers of either device. Anyone know any?
Worst case, i end up buying a new plug for the AliExpress dryers as they’re all US/EU.
r/Creality • u/dllwst • 17h ago
r/Creality • u/fedupwthshit • 21h ago
My K1 Max the chain that holds the cable is really sagging and laying on the bar. How do i fix this? I can't find a replacement chain. I have the CFS-C and the tubbing is all over and pushing on the chain too.
r/Creality • u/OldManGrimm • 1d ago
The laser cutter is a Falcon Pro 10W, so also from Creality.
r/Creality • u/ZeroDayBurn • 1d ago
Finally finished my 40-inch 3D-printed Christmas wall art.
Designed and printed in PETG on my Ender 3 V3 KE, with RGBIC backlighting and a gloss white finish. I wanted to see how far I could push 3D printing as a medium for decorative wall art.
Pretty happy with how it turned out, and I've already got a few ideas for future designs.
Curious to hear what you guys think!
r/Creality • u/fifindr • 1d ago
Designed this table extender to add a bit of extra workspace without needing a bigger desk.
It slides onto the edge of a table and uses a screw clamp underneath to hold everything in place. No drilling or permanent modifications needed, and it gives you an extra surface for keeping things within reach.
Creality Cloud -Table Extender From fifindr https://www.crealitycloud.com/model-detail/table-extender
Hope you like it!