r/CFD • u/Hefestgotthisrum • 7d ago
Errors in mesh
Please help, I am new to ansys and trying to make a mesh from the guides, but mesher is making mesh like for thin objects instead of fluid domain with substructed wing geometry. Two weeks ago I did it right but don't understand how
1
u/LethalProt3ctor 7d ago
From what is see the mesh looks coarse, try making it finer at the wing section. And for thin meshing, I can only guess geometry related issues either while modeling or assigning.
1
u/adamchalupa 7d ago
I'm not sure what's happening - is there a small fin coming out of the center of the bowl?
You need to do localized enhancement and if possible a BOI, depending on how your volume mesh actually comes in. As a user already pointed out your initial tet mesh is way too coarse, I would maybe take your smallest edge or gap, divide by four, and make that your minimum. So if the small edge on that fin thing is 1 mm, make your minimum mesh sizing 0.25mm. In my experience Ansys does not abuse the minimum mesh size and meshes large.
Keep at it! Fluent is awesome.
1
u/Puzzled-Training1945 6d ago
Multizone, hex mesh, element order linear
Keep default size for checking if it works
1
u/ashal_14 3h ago
If I understand your problem right, your boundaries are getting meshed instead of your fluid domain. How did you construct the model. Was it just a model with a spherical domain. If you had access to discovery or spaceclaim could you try using enclosure over there and volume extract options to properly extract the fluid domain. Your subtraction doesn't seem to have worked properly somehow
5
u/RahwanaPutih 6d ago
while you're at it, tried to learn fluent meshing as well, it's way superior than workbench meshing unless you need a structured meshing.