r/CFD • • Sep 08 '26

Navier-Stokes

Post image
1.9k Upvotes

I'm so glad y'all can retire now that your problem is solved.


r/CFD • • Nov 21 '24

Largest CFD simulation ever on a single computer: NASA X-59 at 117 Billion grid cells in 6TB RAM - FluidX3D v3.0 on 2x Intel Xeon 6980P

723 Upvotes

r/CFD • • 25d ago Bravo Heartwarming

Made an open source gui for openFOAM

Thumbnail
gallery
651 Upvotes

So iv been working on this project for a couple of months, I wanted to show it because I finally believe it is a bit presentable now, it is basically a gui with openFOAM, and additionally I added TENO schemes from Fu et al, I thought it was an interesting paper and I wanted to add higher order schemes to achieve higher accuracy (note that I also like swirly lines), going through this project I will be extending it to Ji, Liang & Fu 2021 for unstructured meshes when I have the time. Since most of the coding in this project is human slop, apologies in advance for any bugs that may arise (I lost sleep because of segfaults in cpp)

Source code: https://github.com/CakeCFD/cake-studio

Website: https://cakecfd.org/

I would like opinions from fellow engineers on how to improve this further and make this better, or more specifically what validation case would you trust before using the TENO schemes?


r/CFD • • Aug 19 '25

How to get visualisations like this one

Post image
637 Upvotes

r/CFD • • Mar 21 '26

Aerodynamics of Saddam Hussein

Post image
556 Upvotes

Saddam Hussein hiding spot in simscale.
15m/s velocity 

used k-omega sst turbulence model.
used automatic meshing (standard algorithm), 647k cells, 306k nodes. automatic curvature.


r/CFD • • Aug 11 '26

One of the best books I ever read

Thumbnail
gallery
537 Upvotes

What should I learn after Versteeg & Malalasekera?

Recently finished An Introduction to Computational Fluid Dynamics by Versteeg & Malalasekera. I went through every chapter, implemented the methods in Python, visualized and interpreted the results, and tried to understand the underlying physics.

Now I’m trying to move into advanced fluid mechanics, but I’m struggling with the introduction of tensors/tensor calculus.

Any recommendations for books/resources to build a strong understanding of tensors specifically for fluid mechanics and also aerodynamics for drone? Also, what books would you recommend for going deeper into fluid dynamics and eventually getting into research-level CFD?


r/CFD • • Aug 09 '25

This is a Real Book

Post image
481 Upvotes

I saw this on Amazon.


r/CFD • • Dec 20 '25

Laminar cylinder flow - custom C code

480 Upvotes

I was testing my unstructured C pde solver with an incompressible cylinder flow case, and thought to share it here. Velocity magnitude is shown in the video. While the simulation is 2D, the code is 3D, here I use the same trick as openfoam for 2D simulation, using a one cell thick mesh.

This case uses a projection method for the velocity-pressure coupling, but the code is a general system-of-pdes solver. It is MPI parallel-distributed memory, handles polyhedral cells, and uses automatic numerical differentiation to compute the jacobian of the governing equations and solve the non-linear problems at each time step. It also handles coupled problems, next thing I'll do is give it the euler equations and simulate that cylinder at high mach numbers :)

I posted about my Rust cfd code before, this is another project in pure C, using PETSc for the linear solution process. Its much easier to link libraries in C, and tbh, you don't need anything else to do CFD.


r/CFD • • Nov 06 '22

Not cfd specific but made me chuckle

Post image
479 Upvotes

r/CFD • • Feb 28 '26 Bravo

I wrote my own Euler solver in Python to help myself understand the inner workings of CFD solvers

460 Upvotes

I've spent about a week researching, writing and optimising this program and I am very pleased with how it turned out. My PhD requires me to run simulations fairly regularly so I thought it would be a helpful little side project to improve my understanding of CFD algorithms, and it definitely did! I recommend trying this yourself if you are interested, feel free to ask questions. I have a few resources that may be helpful.


r/CFD • • Jun 02 '26 Bravo

I coded my own 2D incompressible Navier-Stokes solver in Python from ground up. Validated it using historical experimental data. All it took was being unemployed and bored after graduation, 2 months of trouble and toil and some curiosity!

Thumbnail
gallery
452 Upvotes

r/CFD • • Oct 26 '25

Not all heroes wear capes!

Post image
430 Upvotes

r/CFD • • Aug 31 '22

Announcing AeroToy - A real-time interactive fluid simulation & aircraft editor

407 Upvotes

r/CFD • • Feb 01 '26

My first CFD solver built in MATLAB

387 Upvotes

Evening everybody!

Nice to be alongside other CFD nerds down here :D

Just built a CFD solver using MATLAB, it allows you to browse for whatever section image of your choice, turns it into a set of points to be introduced into a flow volume and creates a mesh with a resolution based on your choice.

Still working on that to fully calculate the Cl and Cd for different shapes and flow speeds.

First simulation done on a section from the almighty F35, with FSI enabled. What do you think?


r/CFD • • Jan 16 '25

Ludwig Boltzmann in an LBM simulation

Post image
383 Upvotes

r/CFD • • Mar 06 '26 WOW

Concorde supersonic transition

379 Upvotes

Calculated with CUDA.

Looks like this wind tunnel testing : https://youtu.be/DD53Er62GrE?si=JSTRy6sP701xstmJ&t=107

Hope you will like


r/CFD • • Nov 12 '25

My second CFD simulation, took a while but I was so happy with how it turned

Post image
352 Upvotes

r/CFD • • Jan 31 '21

Simulation of a Kelvin-Helmholtz instability

Post image
322 Upvotes

r/CFD • • Aug 01 '23

40 Billion Cell CFD Simulation of the Concorde at 300 km/h - 33 hours on 32x MI210 64GB GPUs - FluidX3D on GigaIO SuperNODE

318 Upvotes

r/CFD • • Nov 12 '25

Aero of dih

313 Upvotes

Strange Simulation #1

please give suggestions for other strange things to simulate


r/CFD • • Aug 30 '26

My own first CFD || Cuda + D3D12 | 1920*1080 mech with AMR

Thumbnail
gallery
307 Upvotes

First 1.4 Mach & 3000m
Second testing hydrogen rocket engine (I forgot to turn off the walls)


r/CFD • • Jul 31 '26

CFD simulation of airflow over an F-16 at high angle of attack

306 Upvotes

25 million cells, about 4.5 hours on a single GPU.


r/CFD • • Jan 30 '26

Mach 3 flow around cylinder

295 Upvotes

Another test of my custom C solver. Density is shown. Inlet condition is mach 3, initial condition is mach 0.5 inside the domain (which is why there is a wave at the start). Slip wall bc used on top and bottom surfaces.

I used the HLL scheme to avoid the Carbuncle phenomena I get from 3 wave solvers like Roe or HLLC. Also, here I don't interpolate the solution, I show cell averages as constant through a cell, if you look closely you should see the triangles. The actual solver is second order and solves for cell gradients, but paraview can't handle well discontinuous data...


r/CFD • • May 13 '25

Kelvin-Helmholtz Instability (at t=1.5) simulated in C

293 Upvotes

Just wanted to share some simulation results from my Final Year Project :)

Source code: https://github.com/alvinng4/hydroFV