r/AutomotiveEngineering • • May 05 '22

Question Being LGBTQ+ in the automotive industry

0 Upvotes

Hey, I'm staring my major in mech eng in college (northeastern area of the United States) and for as long as I can remember I wanted to design cars. As of now I'm leaning towards being interested in either suspension, propulsion, and/or aerodynamics. I'm a gay male and I'm confident in it, but what are people's experiences of queer people in the automotive industry? Would I be worried about not being taken seriously? Will I struggle to find a job? Or is it a generally accepting industry?

Also what are some good companies that I should look into as I start my career/internship process? I'd preferably like to stay away from lithium ion EVs and gasoline/diesel powered cars if I can.


r/AutomotiveEngineering • • Aug 09 '25

Question Why do manufacturers try to save small amounts of money on their vehicles?

3 Upvotes

I have been working on modding my motorcycle & I was designing a custom fairing for a new headlamp with a powerful light source (~2x powerful than the OEM).

But I noticed that the OEM headlamp wires are so thin, I doubt that I can power the more powerful headlamp with those without burning everything.

The thing is, Wires are inexpensive. Atleast in my country. You can get thrice as thick wire of the same length as the OEMs for an extra 2-3 dollars.

Then why'd they opt for such thin wires that have almost no room for delivering more power? I get the fact that they literally just used what suits their needs but don't they think about people wanting to modify their motorcycles?

Especially since they know the motorcycle they're making will almost always be modified & The weak headlamp they have provided will be swapped out.


r/AutomotiveEngineering • • Mar 29 '22

Discussion 6-Cylinder Manuals not a thing, why?

0 Upvotes

I have been researching the internet and have not found an answer maybe Reddit can help.

I have a 2012 Acura TL manual V6 with AWD that has 300HP and 254Ibs of torque and it's amazing. How come no one was buying them? What's with the craze with these 4-cylinder sports cars? People are all excited about the Integra and its being manual, it's a 4 cylinder. People are excited about Subura Sti. My Acura makes almost the same power yet now one buys them. Also, I have leather seats premium sound system and etc...

I just don't understand is because of EPA?

2012 Acura TL and MDX share the same engine.

So why not just put the 2023 MDX engine into the Integra?

Any clues?

Thank you


r/AutomotiveEngineering • • May 11 '26

Discussion I want to start my own car company.

7 Upvotes

Just like the title says, I want to start my own car company. The problem that I've seen with these last few decades is the death of the economy car. Cars nowadays are not cheap nor reliably built. I want to change that. The type of car I want to build is one that hasn't seen the light of day since the 1920s, the good old fashioned steam car. I do not plan for the steam engine to be the only part to make the economy car a true economy car. I plan to integrate an electric heating coil and battery into the engine so that the coil activates while idling to save on your primary fuel.

In order to do this, I will start small by retrofitting a junked internal combustion engine car with an external combustion engine. I want to replace the entire engine with one that resembles the engine in the Doble Model F with an integrated electric coil that would kick in while the car isles. I will have to have the engine made and first I need to have an automotive engineer design plans for this engine because the only other plans I could find aren't very good and I know that I don't know enough to design it myself.

After the first conversion, and a few more to work out the kinks, I want to build my own car from the ground up.

This car company is not intended to replace all internal or electric cars, but rather to fill the niche left by the death of so many cheap car brands.

P.S. I know this idea seems far fetched but I feel it is sorely necessary. I'm aware that steam engines aren't the most efficient solutions for automobiles, and knowing what we did for electric cars with our century of automotive science, I'm sure we can do the same thing for the humble steam engine.


r/AutomotiveEngineering • • Mar 19 '25

Question Has the auto industry stopped hiring women?

0 Upvotes

Hello Reddit! I am a 31yo automotive engineer with over a decade in the industry. I have an incredibly strong background in vehicle development and suspension, and I have worked for major OEMs my whole career. I’ve perhaps naively taken it for granted over the years how easy it always was to get interviews and offers, and TBH I’ve never really gone more than 6 months without entertaining a new offer.

Fast forward to 2025… I’m noticing a very concerning shift in the job market, and finding that I am receiving job rejections almost instantaneously. I have never in my 12 years experienced this quick rejection, and for jobs that I am arguably overqualified for in the first place.

I’ve been thinking about what this means and wondering if there’s a correlation between my “motherhood” age [albeit I am childless] and the realities of the DEI status. I can’t help but wonder if I am getting written off early because of this and if other women are experiencing the same. No one’s talking about it on LinkedIn, but I feel like this cannot be a coincidence. I have probably been rejected by a total of 10-12 different companies within the first few days of my application, and in no way did they even have time to read my resume at that rate.

TL;DR- Are women in their 30s having a hard time obtaining interviews?


r/AutomotiveEngineering • • Sep 01 '22

Question I am a Mechanical Engineering bachelor student, Can i make my own car after doing master in Automotive Engineering?

0 Upvotes

r/AutomotiveEngineering • • Nov 15 '19

Discussion Ferrari red engine blocks

Post image
5 Upvotes

r/AutomotiveEngineering • • Jun 12 '25

Question Why didn't Hydrogen as a fuel source gain market share when it's so energy dense?

2 Upvotes

When searching around, I found that in terms of Energy density Hydrogen (142Mj/Kg) > Petrol (46Mj/Kg) > Lithium Batteries (generally no more than 1.8Mj/Kg).

That's like 78 times more energy dense than Lithium Batteries. So if Hydrogen is so energy dense, Then why don't we just use Hydrogen based fuel cells or even combustion engines?

I mean I understand the logistics of it aren't very easy or cheap, But were they cheap anyways for EVs? or Anything "non conventional".


r/AutomotiveEngineering • • Jan 16 '25

Question Got this email today from Texas Instruments. What is happening to safety in the automotive world?

Post image
1 Upvotes

r/AutomotiveEngineering • • Apr 29 '25

Question Do you need degree to become an engineer. For example let's say i built drift cars and know everything about suspension geometries, weight balance and I'm good at it. Can i call myself an engineer?

4 Upvotes

r/AutomotiveEngineering • • Feb 17 '23

Discussion Its always difficult no matter how much I learn, to understand what going up here. Please can someone thoroughly guide me to know the hoses, holes, pins, parts, because after all, it's much scary looking for a beginner. I can understand cars 2010 and down, but these I fail. Ill be so happy for help.

Post image
0 Upvotes

r/AutomotiveEngineering • • 25d ago

Question Horsepower

0 Upvotes

If two cars are identical horsepowers, but one has a turbine and more torque, does it accelerate faster and reach the same peak speed as the one without turbine?


r/AutomotiveEngineering • • Nov 17 '25

Question Parking pawl shearing force

0 Upvotes

Dear gearheads,

I keep on telling and arguing with anyone that "driven gears are not for parking" and I remember someone pointing out that the driven gears are actually well-built to withstand the torque of entire car just resting on it, while the parking pawl is "flimsy and not made to keep the car on an incline".

I kinda refuse to believe that a gear designed to keep the car stationary is somehow designed poorly for that very purpose.

So, here's a question to any engineer in here:

On average, what would be the shearing force required to wreck an average parking pawl? For a rough and stupid example, assuming a 1500kg heavy car, at what speed would it need to be to achieve said shearing force, if we suddenly "drop it in park"/brakes fail? I'm really looking for a ballpark figure here, knowing that every car and transmission is different.

Edit: thanks to all that answered! I'm adding my conclusions here:

  • My initial assumption was that the parking pin shearing was the weak spot in the design, as it seemed logical for it to shear and be the only consumable part in the assembly. I've since learned that the pin is tapered and designed to yield when under shock, preventing damage altogether

  • The shock of a car suddenly engaging the pin into gear at motion would need to be at cruising speeds in town for that pin to shear. The taper of the pin and gear ensures that it physically cannot do that, it will just skip at these speeds

  • At the speeds that the pin will engage, the shock is at least 30x-50x smaller than the shear strength of the pin and gear. So it's not an issue whatsoever.

  • The whole assembly is designed to keep the car parked stationary in even the most challenging conditions. However, the pin is made to slip out of engagement if the stress is too much, and that's what we need handbrake for.

  • Some owners fear that the pin won't disengage while under load. Having looked at pictures of parking gear similar to the one I have in my car, I would say this concern is dependent on the design of the transmission you personally have. Additionally, same as with steering wheel lock, a little wiggle should easily loosen it up!

  • In the end: throwing your car in P is fine in most cases and there's absolutely no need to fuss about it by making sure it doesn't engage unless brakes fail. In fact, I would rather always make sure it's engaged and then lock up the wheels with handbrake. The gear and pawl and pin are designed to keep the car parked and won't wear out unless you're slamming in park in motion, which you should never do.


r/AutomotiveEngineering • • Jun 30 '25

Question What were the reasons why petrol cars replaced electric cars despite electric cars predating petrol cars?

11 Upvotes

I didn't believe it at first but the very first car was in fact electric. These e-vehicles predate petrol/gasoline cars by AT LEAST 80 years, meaning we had e-vehicles for 80+ years before the first petrol car came out.

E-vehicles are much older than petrol cars.


r/AutomotiveEngineering • • Apr 03 '24

Discussion Lamborghini Aventador Sterrato

Thumbnail
gallery
0 Upvotes

Just something I mocked up.

Developed by https://discord.gg/wrks


r/AutomotiveEngineering • • Sep 29 '24

Question Working of turbochargers

0 Upvotes

It's known that boost is produced when the exhaust gas spins the turbine wheel which in turn spins the compressor of the turbocharger which sucks and compresses air. So the most important factor in boost creation is exhaust gas velocity. As RPMs rise, the speed of the exhaust gas rises and hence the turbocharger starts creating boost.

Let's assume a situation where a manual transmission car that's engaged in some gear is on a downhill slope and the car now starts accelerating downhill due to gravity and since the transmission is engaged, the engine speed also increases because of the wheel speed increasing. This would mean that the exhaust gas speed would also increase. However the throttle would be fully closed.

My question is, would the turbo still generate positive boost in this case? Why or why not?


r/AutomotiveEngineering • • Aug 20 '21

Question I have a passion for transportation in general? Like public transportation. Would an automotive engineering degree be a good choice for me?

0 Upvotes

Recently, I have branched out from my interest for automotive to transportation systems as a whole. Is the Automotive engineering degree exclusively for cars or is public transportation discussed. Under the Automotive discipline, I show particular interest towards fluid dynamics.

Have people with a specialization in Automotive gone on to work in the public transportation sector?


r/AutomotiveEngineering • • Jun 10 '25

Question Is BHP (brake hp) measured at the crankshaft? Or at the flywheel itself?

0 Upvotes

WHY IS IT that some online sources describe brake hp as measured at the crankshaft… whereas others claim it’s measured at the flywheel?

Is that deviate interpretation perhaps unique to north american testing standards? … as opposed to testing standards adopted by the rest of the world?

Why the distinction, at all?

And HOW / WHEN did it even come to originate, in the first place?


r/AutomotiveEngineering • • Aug 21 '26

Question Im clueless

0 Upvotes

So basically, I just got into a College for B.Tech in Mechanical Engineering. My end goal is to become one of the best Mechanical Engineers working in the automotive field, like I just imagine the Team of Geniuses who create Art in the form of automotive technology and ICE engines, and want to become like them. I am ready to give it all, but the problem is that I dont even know what to do? Like genuinely I have no clue.

I just have a roadmap that Ill give my best here at my college and any how get into TUM, Deutschland and then start as an Engineer in the automotive field ig at a GET post?

So what I want from you guys is to get bombarded with things I should actually be doing right now and knowing right now, and get great advice if I’m missing out on some knowledge or am misunderstood about the job.

I would be really greatly thankful for any kind of advice. Even the most obvious things, like “everyone knows this” because I genuinely dont know and I might actually be clueless. It’s not like I dont have an interest, but I dont want to regret things later because I didn’t have a silly piece of knowledge, thats it.


r/AutomotiveEngineering • • Jul 08 '22

Question Is getting a bachelor's/undergraduate degree in automotive a good idea?

1 Upvotes

I have the option to go to a well recognised university in the automotive industry for a bachelor's degree (top pick in many sources and individual advice) or i can take the safe route and do mech eng for which the placements are worse.

One point users make is that it's too narrow and people might change their mind but i don't see myself working out of the automotive field. Are there any other considerations i have to look into? Is the placement into an automotive brand higher in automotive eng or is it negligible?


r/AutomotiveEngineering • • Mar 17 '19

Informative CRANKSHAFT POSITION SENSOR EXPLAIN! might not know much 😀but the I know will share with my reddit family 👪

1 Upvotes

The crankshaft position sensor(CPS) is just one of the numerous automobile sensors use in everyday modern cars. It might be of two types;

The Inductive sensors. They generate their own voltage signals by the use of a metal plate (the reluctor wheel) .this sensor has a magnet at it tip and a winding. When the crankshaft rotates during the running of an engine, the reluctor also rotates thereby cutting across the magnetic fields generated by the sensor magnet. When metals cut across magnetic fields usually a voltage is generated in the form of signals as in the case of the CPS. Remember the voltage generated by metals cutting through magnetic fields can be known by using the expression v=E/Bl .this analogue voltage signals are sent to the ECU for interpretation and output signals production to the desired actuators.

Hall Effect Sensors. This sensors work basically by hall effect. They do not generate their own voltage signals. For example the voltage used by the ANtilock braking system sensor(ABS) is produced by the ABS modulator unit. For signal to be generated. The force associated with the hall effect is called the Lorentz Force.

Role Played or functions of CPS help. to;

1)Measure the Speed of the crankshaft 2)measure the position of the crankshaft

Faulty crank shaft sensors can be very bad with their effects. The most obvious effect or symptom of a faulty CPS is that the car won't start at all. It might not even crank in some cases.

Thanks for reading through hope this was helpful.


r/AutomotiveEngineering • • Aug 21 '25

Question Recommendations on building a car from concept

0 Upvotes

Hi, just so it's stated, I'm well aware that is is a bad idea but I'm going to ignore that fact and feed into my DIY delusions.

I want to build my own car from ABSOLUTE SCRATCH, I want to do this for a handful of reasons; learn mechanics, learn engineering, learn design, learn manufacturing, and to just have a hobby project. No existing vehicles are exactly what I truly want in terms of style, body, frame, and features/specs.

So what I'm asking, is there any recommend software/program to draft the car, what should I prep before hand in the modeling phase, and any other tips or tricks. I have access to a 3D Printer and plan to use ASA to make all or most of the body panels (and possibly electroplate said 3d printed panels) and use spare existing parts for major mechanics, I.e engine, transmission, etc.

P.S I'm also willing to watch recommended videos or read documents, I just don't know where to start :)


r/AutomotiveEngineering • • Nov 28 '25

Question Car Horn Mandate On All New Cars If Airbags Deploy

0 Upvotes

Am I being silly this should have already been a thing? There's guys who have flashing lights and sirens have been smacked by cars - it'll help with all collisions that are new for anyone helping and if the vehicle goes off road it'll help people notice it happened and find it?

So so many people don't pass in the original collision but pass because of inattentive drivers. Sound the horn and it's a solid preventive for the very first people to arrive.

Seems like a trivial change for auto makers too.


r/AutomotiveEngineering • • Feb 06 '23

Discussion Two cars have the same power output, however one is ICE and the other is EV, which one accelerates quicker?

4 Upvotes

You have two cars with the same power (500hp) but one is ice powered (with appropriate gearing) and the other is an EV (with appropriate gearing), which would accelerate quicker ?

**both cars (for simplicity sake) have the same Cd value

*** I have no idea why my counterarguments are getting lots of down votes, it seems as if this automotive engineering subreddit is against constructive counter arguments for what has been clearly labelled as "discussion"...

**** do people seem to forget the weight issues EVs have??? My god, I thought this subreddit is full of real automotive (objects that move) engineers

***** do you lot also seem to forget evs also have a transmission??

The Porsche Taycan has a 2 speed to aid it for reaching higher top speeds....


r/AutomotiveEngineering • • Jan 03 '22

Discussion Stuck on deciding between two industrys fitness industry and automotive

0 Upvotes

I've always loved personal training but I've loved cars and never got the chance to try being a auto technician. I would love to do both careers tho. I've just turned 32.