r/AutomotiveEngineering • • Sep 16 '26

Question Why are boxer engines so rare? Is there any flaw to it? AFAIK only Subaru, Toyota, and Porsche use it.

Post image
1.1k Upvotes

r/AutomotiveEngineering • • Oct 16 '26

Question Wasn't Honda actually able to do this with the CR-Z?

Post image
454 Upvotes

r/AutomotiveEngineering • • Oct 13 '26

Question What are the Pros and Cons of V4 engines?

Post image
423 Upvotes

r/AutomotiveEngineering • • Sep 03 '25

Question Why cars have front side chest airbags but don't have them in the back?

Post image
353 Upvotes

I think it has something to do with pole crash resistance and general door card depth and design.


r/AutomotiveEngineering • • Sep 11 '25

Question What determines rear wheel steering direction change threshold. Why 60 kph in general?

Post image
302 Upvotes

I noticed that a lot of cars with rear wheel steering have two/three modes. At low speeds axles turn in opposite directions for enhanced agility and sharper turning circle. While at higher speeds they are straight but at even higher speeds they turn in opposite direction for enhanced stability. Although some cars just make the rear wheels straight. What i noticed that on many the sweet spot is 50-60 kph. Why is that the case?


r/AutomotiveEngineering • • Aug 21 '25

Question Why did some cars in 2012 drastically fail the small overlap crash test while some like Volvo and Infinity passed without problems?

Post image
251 Upvotes

I guess they were already thinking about small overlap. Newer gens pretty much all pass but I'm talking about pre 2012 designs.

I also realized that many cars that failed actually almost passed but it seems like it slipped of from the main structure at the last moment and caused problems. Maybe they accounted for 30% overlap or maybe the circular end of the barrier used for testing caused that slip, maybe it would be different if it was just straight.


r/AutomotiveEngineering • • Jun 27 '25 Heartwarming

Discussion Bearings are one the most ingenious parts. Listen to this...

188 Upvotes

They hold 99% of weight

At the same time they connect a part that rotates hundreds of rpm (wheel) to a part that doesn't rotate at all (knuckle)

Don't need external cooling

Don't need pressurized oiling or any kind of oiling appart from the factory grease.

Don't need any MAINTENANCE

Don't need any sort of precautions (no warm up)

They last very long time

They are incredibly compact

They also work in any scenario from tractors to f1 cars.

Work equally good at 2 kmh and 350kmh


r/AutomotiveEngineering • • 23d ago

Question Why do wheel sizes keep getting bigger?

185 Upvotes

I've always thought that smaller wheels were better. There's less unsprung weight and they're cheaper. Yet, you look around and tires just keep getting bigger.

Right now the most egregious example of this is the Tesla cybercab. Its rear tires are 225/60r21.

This confuses me because the car is otherwise compromised for the sake of efficiency. Why then would they use an inefficient tire?

My only thought is that they're doing this to make the car look ridiculous, a task they've succeeded in.

To give you an idea of just how ridiculous it is. The Cyber cab at its most narrow point in the rear is 63 in wide. The total height of each tire is 31.6in. if you laid the two tires flat they'd be wider than the car. It's insane


r/AutomotiveEngineering • • Jul 29 '20

Video Engineers in Stanford’s Dynamic Design Lab are teaching the car to steer with the agility and precision of a human with a goal of improving how autonomous cars handle in hazardous conditions.

167 Upvotes

r/AutomotiveEngineering • • Jun 18 '25

Informative Let's end the debate why do engineers do this? Look at picture 2

Thumbnail
gallery
157 Upvotes

You probably came across these memes or maybe you worked on car and needed to remove additional parts just to make space.

Why is it sometimes this way?

Well first of all when cars are engineered every detail is considered it's not a table it's not a chair it's a mechanical animal that can reach high speeds. They need to think about weight, balance, cooling, cabin space, crumple zones, aerodynamics.

Engineers generally try to make maintenance easy. Many cars have adopted top mounted fuel and oil filters so it's easy to replace since that's the part that needs changing often. But for parts that need change once in 10 years it's not worth sacrificing everything i mentioned.

Take for example v6 minivans, some of them have engines buried under the dash but look at the benefits. Picture 2.

Now you might ask but what about mechanics and their lives?

Well first of all it's not that bad. Many cars have workshop manuals with detailed instructions and bolt locations on every part (torque specs too) By reading it will show you what to remove saving you from trial and error, some people just don't do that and start blindly removing stuff.

Second of all specialized tools make the job easier and faster.

Third of all sometimes it is what it is but 1st and 2nd will help with the third.

Another aspect are advanced diagnostics tool that let you diagnose it without even taking the part out unnecessary.


r/AutomotiveEngineering • • Jun 17 '26

Discussion The Most Bipartisan Request in America

Post image
146 Upvotes

r/AutomotiveEngineering • • Sep 01 '25

Question Why vehicles like carver one aren't more popular?

Post image
104 Upvotes

Carver is just an example but in general self leaning trike tandem vehicle will be amazing for city.

The closest successful thing we have is smart car. Smart car is a great idea. For one or two persons it's amazing and very safe. But if traffic is moving slow the smart is basically stuck the same way as 7 seat suv.

Something like carver one and carver ev will fit perfectly.

  1. Can be as wide as motorcycle allowing it to lane split between traffic.

  2. Safer than motorcycle (cabin can be a safety cell with airbags, plus crumple zone in front). Because it's narrow avoidance of accidents will be very easy too.

  3. Stable as a car because it leans by itself

  4. Tandem seating allows it to be practical as a smart car. Parking i also simple.


r/AutomotiveEngineering • • Sep 28 '20

Video Beijing car show, 2020. new electric car company (HiPhi) with its flagship car.

104 Upvotes

r/AutomotiveEngineering • • May 03 '26

Question Why do heavy-duty pickups use clutch fans instead of electric fans?

Post image
86 Upvotes
  1. Greater airflow than an electric fan can produce in low-speed driving?

  2. Greater reliability than electric fans, for fleet customers who really don't want downtime?

  3. Cost savings on what's already a too-expensive truck?

  4. ??

I'm installing a 2020+ GM 'L8T' engine into a 1987 pickup, and could choose to go either way with the fans. Knowing why GM invariably installed clutch fans in their 2500 and 3500 trucks would help me considerably in choosing which to use in my build. (google pic for attention; not the fan I'd be using)


r/AutomotiveEngineering • • Jun 12 '20

Discussion Intake Manifold Design Practicality?

85 Upvotes

r/AutomotiveEngineering • • Sep 28 '26

Question Is it possible to make a modern version of an RR Sedan (like the Corvair)?

Post image
82 Upvotes

r/AutomotiveEngineering • • Apr 22 '21

Informative I ran CFD on the 2021 Williams car. Link to the full results and images in the comments.

Post image
82 Upvotes

r/AutomotiveEngineering • • Sep 16 '26

Question Designed with rules in mind, the Ferrari 499P had a front electric motor only activated at 190km/h, which made the car part time 4WD. My question: Is this tech plausible with road cars?

Post image
78 Upvotes

r/AutomotiveEngineering • • Nov 15 '25

Question Why do most motorcycles have Neutral between 1st & 2nd gear?

78 Upvotes

Recently saw a video on the topic saying it was mainly so that if you miscount your gears, You won't accidentally shift from 1st to Neutral, Thus you won't accidentally unload your tires due to loss of engine braking which could disturb your balance & In worse cases, cause an accident.

Is this really the reason or there some engineering aspect to it? Because:

  1. There's no reason why you can't accidentally go from 2nd gear to Neutral accidentally (and has many times happened with me which is why I have developed an habit of pressing the gear lever with more pressure to prevent this).

  2. Till not so long ago, ALOT of commuter (100cc - 125cc) motorcycles in India used to (not sure if they still do) have Neutral below the 1st gear instead of being between 1st & 2nd gear.


r/AutomotiveEngineering • • Dec 29 '25

Discussion ELI5: Why are cars being engineered to take 0W20 vs. 5W30?

Thumbnail facebook.com
77 Upvotes

I saw a reel on Facebook criticizing the usage of 0W20 on newer cars vs. an older car’s 5W30.

The argument is that higher viscosity oils are better suited for engine longevity. I’m not sure that I agree yet; even though I’m not an expert, my analytical mind says there’s something more to the story. Different engines, different EPA specs, different cars, different ECU parameters??

My hypothesis is that more complex systems and calculations lead to more failure points at different areas of a mechanical system, like an appliance repair video I saw about how refrigerators are worse now than they were previously. I probably said it all dumb, but I don’t quite have the vocabulary to say it smarter lol.

Curious to hear your thoughts.

Here’s the original post link: https://www.facebook.com/share/r/1BZxPPWVX1/?mibextid=wwXIfr


r/AutomotiveEngineering • • Dec 03 '24

Question Custom automotive paint effects

Thumbnail
gallery
75 Upvotes

Hey guys I’m wondering how Aston Martin was able to create this aggressive color change in their paint. I have an idea and would like to recreate this effect myself. I’m mainly trying to figure out how they were able to make this grey come out of all this orange it’s very intense!


r/AutomotiveEngineering • • Apr 29 '22

Question Can anyone tell me how this exhaust within an exhaust is manufactured?

Post image
75 Upvotes

r/AutomotiveEngineering • • Jul 17 '20

Video Study: Fused Thermal And Radar Automatic Pedestrian Detection And Braking

74 Upvotes

r/AutomotiveEngineering • • Jul 06 '26

Question Modern vehicles are excessively complex?

73 Upvotes

Modern vehicles are so excessively complex, that even experienced mechanics struggle to fix them at times.

My dad was a mechanic for 45 years, (now retired) and he would fix his own vehicles in his garage during the 1970s, 80s, and 90s, all the time, and all he needed were some basic tools.

Today, you have to pull the entire engine out and/or practically take apart the entire vehicle just to replace a single part. A process that can take several days!


r/AutomotiveEngineering • • Jul 21 '25

Discussion Why can’t we use the heat produced by gasoline engine into useful energy?

73 Upvotes

Since the combustion engines produce too much heat. We just waste it by cooling with radiators

Why engineers make some kind of reservoirs where the steam accumulates pressure lets say upto 50-100 bars and we can use to “boost” the engine by releasing the pressure

Too much heat is wasted for nothing in the engines

Im pretty sure engineers are way smarter than me, and they definitely thought about this before me,

just wondering what are the challenges? What makes such thing impossible or “not worth it”