r/AutodeskInventor • • 13h ago

Requesting Help Inventor 2017 Part Visibility Issue

Thumbnail
gallery
1 Upvotes

In my main assembly certain parts are invisible, however when I open the sub assembly the parts display just fine. I have never ran into an issue like this that wasn't a simple visibility/transparency issue.

Any tips would be greatly appreciated.

To note, these assemblies came from a Pack & Go from a different project and different designer.

The parts that are invisible were downloaded STEP files originally, I could download them again and see if that fixes it, however the original issue is still present.


r/AutodeskInventor • • 20h ago

Requesting Help 3D Connection between two Points

Thumbnail
gallery
5 Upvotes

Hey Guys,

for all projects so far I didnt need any help, but I have something which I made twice now and it failed so I am asking for help.

I have a small part which I 3d Print. It is a holder for an Encoder.
The Encoder is screwed in the red "Ring", the White/Default is the holder where 2 Screws will mount the Plate to a Wall.
The Green "Arms" are my Issue. They have broken twice now.
The Issue is, that these go in 3 Dimensions and I have no Idea how to place my plane.

At the same time, as the Encoder sits outside the red ring, I cant connect the Arms on the sides of this Ring.

Do you guys have any idea in connecting this so its more sturdy?
Its printed in PETG, so should hold okay.
I can share the IPT Part, I just dont know how :-|

Thanks to anyone in Advance!


r/AutodeskInventor • • 1d ago

Question / Inquiry Anyone working with assemblies larger then 100m?

6 Upvotes

Hello everyone. AutoCad 2D user here looking to move to 3D. Been researching Inventor and came across this information regarding the maximum model space size:

https://help.autodesk.com/view/INVNTOR/2027/ENU/?guid=GUID-84623939-38A8-49BF-8D97-BB9DA3697056

I work with material handling equipment and while I don't foresee a single part exceeding 100m, the assembly layout potentially could. Was curious if anyone is working with larger assemblies and if you have any issues.

Thank you.


r/AutodeskInventor • • 2d ago

Question / Inquiry Easier way to model wiring?

4 Upvotes

Hello! I've been trying to model the internals of this combat robot for competitions and was wondering if anyone knew an easier way to do wire modeling? i did this using distances and some guestimation. is there an easier way to do this?


r/AutodeskInventor • • 2d ago

Question / Inquiry Autodesk Students Version (UK college student)

2 Upvotes

Hi was just wondering can a uk college student access the student version of autodesk inventor 2027. Has anyone here done it?


r/AutodeskInventor • • 3d ago

Question / Inquiry Workstation Laptops with Integrated Graphics

2 Upvotes

Hello everyone,

I am looking to upgrade laptops in my company and we are currently running 9th Gen i7s with Quadro RTX 3000. 64Gb of Ram

I was wondering regarding performance of laptops like ThinkPad P14s where I have 64 Gb of ram but does not have a dedicated graphics card, but has integrated graphics would be a decent upgrade to what we use currently.

Our projects range from 100 to 600 parts per machine and sometimes would produce assemblies with 10 machines. The load times of those assemblies would be around 2 to 10 minutes depending on the complexity of the machine.

Reason I am asking is the hardware is about 7 or 8 years old and we all feel that the laptops could run a bit smoother. However current market for a workstation is quite expensive. Would anyone have any experience on using such a laptop?


r/AutodeskInventor • • 3d ago

Requesting Help Export bug hurting my work

2 Upvotes

I need some help here friends. I have an export text bug that happens whenever I’m not in the office. At home, all my .dwfs exported come out in an unusable font. I use a style library of my company. I don’t know if it’s searching for a font library it can’t find when I’m not on the network at work? I’m not sure what the source is… any advice would be appreciated. 😓


r/AutodeskInventor • • 4d ago

Requesting Help How do i fillet this?

Thumbnail
gallery
5 Upvotes

I’m trying to make this part and i’m running into troubles adding the fillet. Am i reading it wrong or have i built it in a way it can’t fillet?


r/AutodeskInventor • • 4d ago

Requesting Help Estoy necesitando ayuda para hacer el pliegue de los apoyabrazos.

0 Upvotes

Hi! I am trying to make this bench in a drawing and honestly, it's becoming impossible for me, because the logical thing would be to make a contour flange, make the entire body of the bench, make the cuts where the armrests need to fold, and then make the folds for the armrests. Theoretically it's easy, but I can't manage to make the folds for the armrests; it's like I have to make 3 simultaneous folds. Any suggestions?"


r/AutodeskInventor • • 4d ago

Requesting Help Dynamic simulations inventor

2 Upvotes

Hii guys i want to know where can i learn how to use the simulation functions in inventor i couldn’t find good videos on YouTube


r/AutodeskInventor • • 5d ago

Question / Inquiry Editing a part within an assembly

8 Upvotes

I am precious SW user at a job where I now have Inventor. I was trying to project geometry from one part in the assembly to another, but was not able to edit the individual part.

The only way this would work is if I closed the part file for the part I wanted to edit.

Is this normal? In SW you could jump back and forth making edits on both places.


r/AutodeskInventor • • 9d ago

Requesting Help Autodesk Fusion 360 won't launch – appears in Task Manager for a few seconds and then disappears

Thumbnail reddit.com
0 Upvotes

r/AutodeskInventor • • 10d ago

Venting Why I hate Inventor and love CATIA V5..

0 Upvotes

I have been using CATIA V5 in the automotive industry here in Europe for quite some time now. I use CATIA V5 every day for complex casting parts, plastic housings, and so on. For my private workshop at home, I needed a CAD system for 3D printing, welding and CNC milling. Because a private CATIA license with all the modules I need is way too expensive, I got Autodesk Inventor. I thought Inventor is a modern CAD system and that it would be easy and great to use, but after a few weeks I am honestly underwhelmed. For me, CATIA V5 is simply 100 times better in every single way except its pricepoint.

The biggest problem for me is how Inventor handles the model tree and part structure. At work in CATIA, me and others build super stable master models with skeleton structures, separate axis systems, and publications. I always structure my complex parts with many separate PartBodies and combine them with Boolean operations like Union Trim, Assemble, or Remove. My surfaces and wireframes are cleanly sorted in Geometrical Sets. When an input surface from one supplier changes at the very top of a 2000 feature tree, I just use the Replace command on the publication. Maybe I have to re-select one or two edges, yes. But then, the whole part updates without errors, including complex drafts, shell elements, and fillets. In Inventor, the whole logic feels weak. Multi-body modeling is not half as good, projected lines in sketches lose their reference all the time, and if you change something early in the tree, everything turns red and breaks. Inventor loves to throw error messages at you, its just insane.

When it comes to surfacing (GSD in CATIA), the difference is even more extreme. In CATIA, the mathematical kernel gives you total control. I have to say that I'm not a Class-A surfacing strak guy, so I don't use CATIA`s ICEM Surf. I just model regular engineering surfacing on the B-side and complex functional surfaces. I build surfaces using Adaptive Sweeps with Law curves, Multi-Sections Surfaces where I can control every coupling point for clean G2 curvature, and Sweeps with exact draft directions for injection molding tools. In Inventor, the “surface tools” feel like a toy. You have almost no control over the surface math, the Loft tool makes terrible dirty surfaces as soon as you want tangency on ANY 3D curves, and complex variable fillets simply fail where CATIA just calculates it without problems.

Also the automation and assembly performance is no comparison. In CATIA, I build smart PowerCopies and User Defined Features. When I need a complex screw boss or clip that adapts automatically to a curved surface and pulling direction, I just insert my PowerCopy, click three inputs, and it is done. It just works. In Inventor, iFeatures feel super clunky and iLogic needs weird coding. I mean, am I a programmer? No, I’m not. And in big assemblies, CATIA V5 lets me open a whole car section with over 30,000 parts in seconds, move things around fast, and do clash detection in real-time. Inventor already gets slow when I build smaller assemblys.

To be honest, switching to Inventor made me realize what a masterpiece of engineering CATIA V5 actually is. CATIA is the absolute spaceship among all CAD programs. People always laugh about its old Windows 98 look, but under the hood, it is an unstoppable power machine. No matter how crazy the geometry, how massive the assembly, or how deep the feature tree is.. CATIA never lets you down. 12000 features in a single casting? No problem. It just works, rock solid, every single day. There is a reason why we build whole airplanes and cars in it, while Inventor feels like you are trying to build a rocket with Lego bricks. God praise CATIA V5. It is simply the king of all CAD systems and an absolute masterpiece of software engineering.

Sorry if this sounds like a rant and sorry for my English, I am not a native speaker. Maybe I am just too used to the CATIA way of thinking. How do you guys handle Inventor? Do you encounter the same problems?


r/AutodeskInventor • • 10d ago

Requesting Help Dragging and placing imported sketch geometry precisely

Post image
5 Upvotes

I am designing a milled metal cover for an RF circuit board. I have exported a DWG file of the cover cutouts from Altium Designer to be placed into a sketch in the cover.ipt file.

I want to stick the cursor to the point in the center of that hole while dragging. The cursor loses all of its powerful snapping abilities as soon as it starts dragging stuff around. No snap to object. No snap to grid. I cannot use a dimension because that disturbs the geometry.

I have been emitting cuss words for two hours now, trying to figure out how to do this. It’s such a basic function that you would think that it could be done. But no.

Is it possible to tell the group of objects that I have imported to be constrained to each other?


r/AutodeskInventor • • 10d ago

Requesting Help How to model a radial cam groove/pocket on a cylindrical surface

Thumbnail
gallery
13 Upvotes

Hi everyone,

I'm working on a part in Autodesk Inventor and I'm struggling to model a pocket for a cam follower (a simple roller, not shown in the drawing). I already have a 3D model (pictures 2 and 3), but since it is in .STEP format, I'm trying to recreate the entire part from scratch based on the drawing.

I already have the required curve on the outer cylindrical surface, which defines the geometry of the pocket.

What I would like to do is create a cut starting from this curve and extending radially inward, until it reaches a second cylindrical reference surface.

The main issue is that I don't want a standard linear extrusion: the cut should follow the radial direction at every point along the cylindrical surface, rather than a single fixed direction.

I'm not sure which Inventor feature or modeling approach would be best suited for this: Loft, surface modeling, or something else.

I'm only looking for help modeling the pocket itself, not the roller or the complete cam mechanism.

Has anyone dealt with a similar geometry? What would be the most reliable way to model this in Inventor?

Thanks in advance.


r/AutodeskInventor • • 13d ago

Requesting Help Weldment for square tubing at 'T'.

7 Upvotes

How would i create a weld for this connection in Inventor? I have tried the grove weld and it works for where the flat face of the vertical piece meets the rounded edge of the tube, but where the two flat sides meet has nothing. If I then try to add a fillet weld between the two flat faces, the two welds don't combine.


r/AutodeskInventor • • 13d ago

Requesting Help Desapareció las librerías

Post image
5 Upvotes

Hola, tengo un problema, actualice el programa a la versión 2026.4, también descargue un paquete de idiomas y ahora el ingresar a un proyecto ya no están las tuercas, muchas librerías desaparecieron. Ya intente instalar de nuevo el inventor, seleccionar la carpeta en opciones de aplicación entre otras cosas. Que mas puedo intentar?


r/AutodeskInventor • • 16d ago

Requesting Help Help with measuring part

4 Upvotes

Hello everybody

I am a student and we need to recreate something in autodesk inventor. I chose a pasta machine and the measurements and modelling are going relatively well, until I came across this part (mind you there is 3 more like this but they are fairly similar).

My issue now is, I have no idea how or what is a good way to measure

  1. Some of the cutouts (there place on the part)

  2. The curved sections

I tried to retrace the contour on a paper and then measure them, but the curved sections are giving me a hard time. So I want to know if you have better methods or some cheap tools I can buy.

I, thus far, have only worked in standard part and I don't know if sheet metal would make modelling it easier or not. I would appreciate some input on this as I have never worked with sheet metal.


r/AutodeskInventor • • 18d ago

Requesting Help Mesh issues Inventor Nastran

Thumbnail
gallery
5 Upvotes

The first screenshot with the temperature plot shows the obstacles I'm trying to solve.

For all intents and purpose, the model is a simple cuboid with 2000F load on 5 faces (cold blue here for some reason) while the other face is exposed to ambient temp ~100F. I started with Constraints but instead opted to use Load conditions to set the faces at prescribed temperature.

  1. Why is the mesh forming a distinct line or boundary (see pic 2) where the temperature plot is discontinuous jumping from 0F to whatever the solver spits out

  2. Is that related to temperature discrepancy where the loaded side (2000F) still shows the temperature to be 0F (blue)?

Appreciate any help. Thanks!


r/AutodeskInventor • • 19d ago

Requesting Help What is wrong with this content Center?

Post image
10 Upvotes

I have added this Content Center file to Inventor from Atkore. I used to have it at my old place. However what does this Yellow exclamation mean. I can tick the Unistrut file but it isn't in Place from Content Center ?


r/AutodeskInventor • • 20d ago

Requesting Help Worm Gear Generation

5 Upvotes

Hi!

I am trying to create Worm Gears manually, because the Worm Gear Generator in Inventor 25 is not sufficient, and does not do calculations based on the norms of the country i am working in.

Using Norms I have exact dimensions of the worm gear I would like to construct in CAD.

I have two strategies on how to construct this gearing:

  1. construct gear and worm separately, the gear with circular pattern of teeth and the worm with a spiral tooth element.

  2. create the worm with a spiral tooth element and following this using its profile to cut the teeth into the gear.

the issue with Strategy 1 is that the norm specifically specifies shape of the spiral worm tooth, and so I cannot be sure that a tooth form I use for the gear will be functional or structurally sound.
I have tried Strategy 2 but am having difficulty. Using combine feature I am able to mak a cut in the gear using the worm to create teeth, however thes are only some of them and i cannot replicate them around the rest of the gear volume.

This worm gearing is currently being constructed as a prototype in research hence why it needs to to conform to norms, and also why it is insufficient to use the worm gear generator or access industrial software for access to worm gear CAD model.

In my mind this should be possible, but I am fairly new to Inventor so maybe these are just some capabilities that aren't possible, or not in this way.

Grateful for any help regarding worm gear modelling!


r/AutodeskInventor • • 20d ago

Question / Inquiry Effect of error in Offset Bonded Contact Reaction Moment

5 Upvotes

Hello again fellow masochists,

I am trying to figure out an efficient way to dimension welds when modelling using shell elements is not appropriate, preferably without using a stress-dependant and computationally intensive method like ENS. Contact Reactions presents a way forward by seemingly allowing determination of forces and moments in a weld seam modelled using an Offset Bonded contact between the two welded faces, however Autodesk Technical Support says the following:

Note: The moment reactions for offset bonded contact are incomplete and should not be used. Offset bonded contact transmits a moment in addition to forces. The contribution of the moment is missing from the output (but is included in the analysis); therefore, the moment contribution is missing from the above moment reaction calculation.

On its face this should make Contact Reactions useless, since the moments are obviously very important in analytical weld scantling formulas like those of Shigley. In testing some simple geometries, however, the moment was within one per cent of the expected value.

Is anyone able to shed light on how big the transmitted moment is in relation to the resultant moment in an offset bonded contact about the width of an element? Is there any other way to go about dimensioning welds using contacts, or is it time to move on to different software?

P.S. Manual Surface Contact has a bunch of weld-damage-related options under “advanced”, but these features require parameters typically derived from test data, or at the very least require prior knowledge of in what way the welds will be loaded. Result display options from this feature do not seem to exist in the way they did in Autodesk’s old NASTRAN implementations; for example I2027 does not have a BOND DAMAGE variable for display.


r/AutodeskInventor • • 20d ago

Requesting Help Need help modeling this part

Thumbnail
gallery
8 Upvotes

I've been 3d modeling a steam engine fot fun from a blueprint I found, and got stuck on this part. I've tried several times, and I just cant figure out how to get that wierd pillow-shaped round on the end to look right, the larger fillets always end up not lining up in some way, it's really frustrating. How do you model that shape?

Here's the link to the website I got the blueprint from, if youre interested in modeling one of those blueprints. There are some missing dimensions, but they're pretty good overall.

Inventor Wizard Blueprints


r/AutodeskInventor • • 21d ago

Requesting Help Equation Curve frustrations

Post image
6 Upvotes

When I enter an explicit equation like y = x^2 in the Equation Curve tool for a sketch, I get a unit error because the result is expected to have units of length but Inventor interprets the exponent as having changed the units to mm^2.

What does not work:

  • x^2

  • x^2 mm

What does work:

  • x^2 / 1

What am I missing here. Is there a way to enter standard mathematical equations without manually correcting the units of each power term?