r/Autobody • • 39m ago

Is there a process to repair this? 2016 gmc sierra 1500 mirror broke

Post image
2 Upvotes

Can I replace just the glass on my broken 2016 gmc sierra 1500 mirror? Replacing the entire mirror looks like a big job with taking off the door panel.


r/Autobody • • 1h ago

HELP! I have a question. Is this “totaled”? Would a shop be able to straighten the frame out so I could mount a new bumper?

Thumbnail gallery
1 Upvotes

r/Autobody • • 3h ago

HELP! I have a question. 2013 chevy duramax

Thumbnail
gallery
1 Upvotes

The co-worker hit it with a box truck and am questioning as to how much it would it would be to fix or how I would fix


r/Autobody • • 4h ago

HELP! I have a question. How to tell if car is still safe to drive

Post image
0 Upvotes

Hi I got merged into on the highway last night in my 2009 Honda civic. The damage is below the passenger door. How can I tell if it is still ok to drive? I’m a new driver and have no idea what to do and really can’t afford to fix it right now


r/Autobody • • 4h ago

Is there a process to repair this? Discoloration from dripping liquid?

Thumbnail
gallery
1 Upvotes

I’m including two photos of my 2024 XC90. I parked the vehicle in an underground parking garage. When I returned to the vehicle, something had dropped from the ceiling, presumably water with some material from the structure leaching into it. It was raining outside so I didn’t think much of it but now the paint has this odd spot on it. It is not raised, there doesn’t appear to be anything you could wipe off, but more of a stain. Any idea whether this is something that can be fixed or am I screwed?

Making a claim against the garage isn’t an option - it’s a publicly operated garage in a city that is quite literally bankrupt. It’s a dead end, trust me.


r/Autobody • • 7h ago

HELP! I have a question. Evidence of welding?

Post image
11 Upvotes

I recently bought a 23 plate L3 H2 Peugeot Boxer. It was previously an Enterprise vehicle and didn’t come with a service history. When removing the ply panelling I found this behind the rear passenger side wheel arch, looks to be some previous welding work?

Very new to anything vaguely mechanical so just wondering if this is something to be concerned about? Thanks in advance


r/Autobody • • 9h ago

Is there a process to repair this? Any idea how I can fix this?

Thumbnail
gallery
0 Upvotes

r/Autobody • • 13h ago

Is there a process to repair this? How to restore/fix peeling and ruined Rustoelum clear coat?

Thumbnail gallery
0 Upvotes

r/Autobody • • 13h ago

HELP! I have a question. 15 in brooklyn new york looking into the buisness of scratch and dent repair. I know only the basics about scratch repair , like sanding and painting but i feel learning about dents would greatly benefit. Im comfortable with the online meta ad side of marketing. Any help is appreciated.

Thumbnail reddit.com
1 Upvotes

r/Autobody • • 15h ago

HELP! I have a question. Could these cavities cause rust?

Thumbnail
gallery
2 Upvotes

Purchased truck with surface rust / oxidation on worn down door sill. Today I sanded it down and followed all steps using duplicolor products. These holes were showing even after 5 layers of primer + sanding. They kept getting worse with each layer rather than filling. What caused this? And if it poses a risk of future damage to the paint / metal, what can I do to fix this? Attached before during and after


r/Autobody • • 15h ago

HELP! I have a question. Diy paint help

Post image
0 Upvotes

I have a mr2 spyder I plan on repainting myself. I need some advice on tools and materials. I have respirator stuff from my welding hobby I can use here but outside of that I have to buy everything else. I need advice on what you would get if you were to start fresh at home. Here is a basic list I'm pricing out. Trying to keep a tight race budget. A good chunk went to a bambu h2d 3d printer to fab up an exhaust. I'm going rig up a spray booth so I don't expect showroom paint.

60 or 80 gal tank - looking at a quincy qt-54 for around $1300

iwata or devilbiss? I was thinking harbor freight for the primer then for paint and clear using either one of the 2 or both.

I have two 6in inline fans that move about 500 cfms.

paint i'm using is ppg deltron. I may stick with the 202 toyota black or try 1M1 smoke gray matte.

any advice on products please.

fyi, I typically go overboard so I do plan on running piping along the wall to mitigate moisture. I ran my own 240v to the panel when I bought my welder. I know 90% will go to the prep work like block sanding and whatnot. I don't have body damage to deal with other than 1 or 2 nickel sized dents on the hood from road debris.


r/Autobody • • 15h ago

HELP! I have a question. Read my blocked panel - help with bodywork/filler

Thumbnail
gallery
1 Upvotes

This is an unknown brand aftermarket hood. 3 different locations all showing my question. As I block/board sand towards the edge/gap and I have high spots immediately next to low spots at the panel edge..

How should I address these? Smash down the high spots and re-skim with filler?

Or, lay on a thicker skim coat towards the edge and end up with a thick rounded over edge on the hood.

If there’s a term for what I’m encountering, thanks for any leads so I can locate more help via google.


r/Autobody • • 18h ago

RUST Small Rust Spot on Car Scratch: Can I Use a Touch-Up Paint Pen or Do I Need Rust Stabilizer First?

Post image
3 Upvotes

My younger brother's car has this scratch. We already bought the paint pen, but there's a small spot of rust toward the top. Can we just paint over it, or should I buy some rust stabilizer from Walmart first? Sadly, I'm being serious. I know rust can slowly eat away at the metal, lol.


r/Autobody • • 18h ago

Is there a process to repair this? Is this fixable

Post image
2 Upvotes

My transmission drain bolt area has a huge rust spot on some plate it seems like can it be cleaned and fixed


r/Autobody • • 20h ago

HELP! I have a question. Former Key Collision techs, How's it going?

4 Upvotes

How are your shops doing since the Caliber takeover? Guarantees are disappearing in a couple weeks, are you gonna stick around?


r/Autobody • • 23h ago

Is there a process to repair this? clear coat bubbling and cracking

Thumbnail
gallery
2 Upvotes

What are my most affordable options? This is my daily driver I don’t care if it looks funky but I don’t want the panels to rust

tia 🙏


r/Autobody • • 1d ago

HELP! I have a question. Rust repair-DYI

Thumbnail
gallery
1 Upvotes

Removed bubbled paint and sanded it down to metal. Two small rusty cavities left. Should I keep sanding or use a rust treatment product. Any advice is appreciated.


r/Autobody • • 1d ago

HELP! I have a question. 2024 Mazda CX-5: Ran over something on the freeway and it punched a hole through my bumper. Repairable or replace?

Thumbnail
gallery
0 Upvotes

Was driving on the freeway when I ran over something (still not sure what it was). Heard a pretty loud bang, so I pulled over and noticed I had a flat tire and a massive hole in my rear bumper.

Vehicle: 2024 Mazda CX-5 AWD

I’ve looked underneath and can’t see any obvious additional damage or where the object might have gone. Not entirely sure what happened or how something managed to punch a hole through the bumper like that.

Based on the photos, is this something a body shop could realistically repair, or would the entire bumper cover need to be replaced?

I’m also curious what a repair like this would typically cost, including paint and labor. I understand estimates vary depending on location and the extent of the damage, but even a rough ballpark would be helpful.

Any advice or suggestions would be appreciated. Thanks!


r/Autobody • • 1d ago

Is there a process to repair this? 2012 A3 rust near in between door and tire.

Thumbnail gallery
1 Upvotes

r/Autobody • • 1d ago

HELP! I have a question. How do I fix this dent on my Tacoma front bumper? Any advice appreciated.

Post image
1 Upvotes

Can’t seem to push on it from the back cause it’s blocked off. I have a heat gun.


r/Autobody • • 1d ago

HELP! I have a question. Question about bending a car frame

Post image
9 Upvotes

I'm restoring a 1956 studebaker goldenhawk. Not a frame off resto, so I didn't do any frame measurements, but I did look things over while it was up on the lift.

Now I'm hanging front fenders and getting ready to put in a rebilt motor when I noticed that the front fender mounting points are not lining up at all with the 2 holes on the pad of the frame, as are the holes not close where the inner fender apron holes line up with the firewall.

So. I get out some string and start measuring and it turns out my front frame horns are 4" too high!

Now here's where I explain that this car was something I bought as somebody's unfinished project (yea, I know, I know) and the fenders and front sheet metal were all loosely bolted up. I just assumed the previous owner just said screw it...when really it looks like they were saying "screw me"!

I've looked very carefully at the frame (yeah, now!) for wrinkles, creases, cracks etc and I see nothing that looks like a bend other than factory and it all looks good. The frame rails are straight where they should be and bend where they're supposed to. The major bend in the front is a gradual sweep up starting at the firewall/cowl perch and finishing at the front suspension crossmeber/yoke.

The only thing that I can think of is that the gradual sweep point of this frame is bent higher than factory (from? I don't know)

I live out in the country and don't have access to a frame shop, nor do I have the funds to pay for a frame job. I do have the equipment to do a redneck frame bending (bottle jacks, I beams, torch, back hoe etc.)

Think I could straighten out the gradual sweeps enough to lower my front horns 4"? Or will I just screw it up worse?

The frame is 4" C channel with sheet welded on the bottom to box it up.


r/Autobody • • 1d ago

HELP! I have a question. Honda Civic: consigli su come ripristinare alettone

Thumbnail
gallery
4 Upvotes

Ho questo problema alla plastica dell’alettone posteriore: la pellicola si è staccata per effetto del caldo estivo, lasciando il residuo di colla e coloritura della plastica.
Nessun carrozziere conosce solventi o strumenti efficaci per ripristinare - se non la trasparenza - almeno un aspetto decente.

Cerco consigli da qualcuno che ha avuto lo stesso problema.
Grazie a chi mi saprà dare aiuto.


r/Autobody • • 1d ago

HELP! I have a question. Best way to get this dent out?

Post image
2 Upvotes

It's a 2011 ford focus se I hit a deer on my way to work this morning,


r/Autobody • • 1d ago

Is there a process to repair this? Small tear in Mercedes A238 soft top – repair or DIY fix?

Post image
1 Upvotes