r/Autobody • • Jul 03 '24

Check this out The last of a dying breed

Post image
0 Upvotes

/s


r/Autobody • • Jun 23 '25

HELP! I have a question. My friend tried to repair the wife’s car

Thumbnail
gallery
0 Upvotes

Am I fucked? My friend was trying to help me get my wife’s car fixed up after she backed into a yellow pilon at work and this is the result it was worse apon arrival Sunday…he was spraying the whole bottom half of the door with clear and paint…I don’t have a picture from Sunday but it was bad…we were pissed!…i think im going to have to get it redone all together at this…i don’t know what to do he wants 500 for the job…he had the car for a month and i can’t believe this is what i get in return any suggestions on what to do moving forward my wife want to pay him 200 tell him to kick rocks and get it done at a shop first pic is before second pic is “done ready for pickup at our leasire”


r/Autobody • • Mar 03 '26

Is there a process to repair this? My totaled car is up for bidding on Copart and I’m tempted to put a bid on it and get it back and repair it. What do I need to fix?

Post image
0 Upvotes

I’m 23F and I don’t have much knowledge at all about how expensive these repairs would be, honestly. Anyway, here is a closeup shot of the damage from when I got hit. I received a settlement of $5,240 and I ended up getting another car, but why not just get this back while I’m at it. Back door wont open, the door handle is like popped out as well as the top part of the door is popped out as well, and the lady who hit me messed up the electronic parts- the driver side front window motor is weak and then the back driver side window won’t roll down at all. Is it worth it to buy this back?


r/Autobody • • Apr 07 '25

Check this out Insurance says this is totalled :/

Thumbnail
gallery
10 Upvotes

Kinda sucks, some plastic piece that holds the radiator is broken and its the only reason they say it's totalled.


r/Autobody • • Jun 23 '24

Project time! How feasible is it to convert a traditional sedan trunk, into a liftback?

Post image
7 Upvotes

Say you have a car like a Camry Hybrid or a 5 series with a traditional trunk, and you wanted to turn that trunk into a liftback like a 5 series GT/Audi A5/7 Spotback/Kia Stinger. How feasible is this project? Would it dangerously compromise the structural rigidity of the car? Could you reinforce it to prevent loss of rigidity?


r/Autobody • • Jun 20 '26

HELP! I have a question. Fixing a scuffed bumper- sanded area won’t disappear

Post image
0 Upvotes

This is my first time doing this so go easy on me

Sanded with 150, 360 then 850 then finally 1000 grit wet. What’s on now is the sandable primer. I’ve put about 3 coats on it but the spot simply won’t disappear.
I don’t want to overdo it with the primer but I also know that I should probably maybe it look even or it’ll come out once I put the pain on it.

Any advice would be greatly appreciated.

Thank you!

Edit: corrected what I sanded with


r/Autobody • • Jun 01 '26

Acceptable quality? Justified redo for paint match?

Thumbnail
gallery
1 Upvotes

I know World Rally Blue is hard to paint match, but had my bumper sent off to get repainted due to damage. The car wasn't on site to help them blend, but is this justified to bring it up and get it repainted to a lighter tone?


r/Autobody • • May 11 '25

HELP! I have a question. Did I get scammed?

Thumbnail
gallery
0 Upvotes

2025 Honda CRV Hybird. These are the before and after pictures of getting it “fixed” and then having to “paint” the front bumper myself. I got quoted for 700 for around 15 minutes of work. They fixed two dents and took away most of the red. There were still some major scraps that were black. I asked how much the paint job was going to be and they said around 600(around 30 an ounce of paint). I didn’t want to spend that much so I painted it white myself and it turned like shit. So does it really cost around 1200 to repair and paint this bumper entirely? I’m not knocking their expertise but 700 for 15 min worth of work just had me questioning.


r/Autobody • • Jan 15 '26

HELP! I have a question. Dent removal.

Thumbnail
gallery
0 Upvotes

How much do we think we’re getting with suction cupping this one boys?


r/Autobody • • Oct 10 '24

Acceptable quality? Got my fenders rolled in a shop for 150 paint is cracking is this acceptable?

Thumbnail
gallery
0 Upvotes

r/Autobody • • Apr 24 '26

HELP! I have a question. Is my car totaled?

Thumbnail
gallery
1 Upvotes

It was parked and a kid reversed into me. 2017 ford mustang Ecoboost with 47,000 miles.

I will be providing the update 4/27 for anyone interested

**4/28 - No update as of yet, insurance said it’s going to take a few more days to provide an update.


r/Autobody • • May 31 '26

HELP! I have a question. Need a body shop in la im going to pay cash help me out

Thumbnail
gallery
0 Upvotes

Lady hit me getting it the car pinned me against door I’m good tho ! Need my baby fixed asap ! Los Angeles


r/Autobody • • Jan 17 '25

HELP! I have a question. Help!!!! spray can job gone wrong.

0 Upvotes

i was painting my integra with some rustoleum spray paint then all hell let loose, all of a sudden it started developing some aligator skin looking peel and i panicked and started sanding it down but no matter what it wouldnt dry, the hood looks like this aswell and its just this side what do i do if i can even save it at all


r/Autobody • • May 15 '26

HELP! I have a question. How bad is this damage? Worth fixing or should I move on?

Thumbnail
gallery
0 Upvotes

Hey everyone, looking for some honest opinions/advice on my car damage. Personally, I feel like it might be fixable, but I want some opinions from people who know more about body/frame damage.
A few details:
No airbags deployed
I believe the suspension is still okay
The passenger side door won’t open because the front right corner/fender area got pushed back into it
I started the car and it came on for a second, then immediately shut back off
I think it shut off because the pulley/belt system may be jammed or unable to spin freely due to the metal being pushed into that area
I’m also considering taking it to a body/frame shop just to have the frame or bent metal pulled back into place, then doing the rest of the work myself if possible. Curious if that sounds realistic or if the damage looks beyond that point.
I’m mainly trying to figure out:
How bad does the damage actually look?
Does this seem repairable or likely totaled?
Does it look like there could be frame/unibody damage?
What hidden damage should I be worried about?
Would a body shop even do just the frame pull/alignment part?
Is this realistic for someone to partially DIY after the structural work is done?
The car is a 2017 jeep patriot
Any advice or opinions would really help. I’m trying to decide whether it makes sense to repair it or move on from it. Thanks

Edit:
Alright, I hear what most people are saying—it’s probably not worth dumping a ton of money into. I’m not trying to argue that point.
I guess my main question now is:
If the frame rail were pulled back into place, is it realistic that the car could at least be made drivable again with some additional repairs?
I’m not looking for a perfect cosmetic fix, just wondering if getting it running and moving again is even a possibility, or if the damage is too far gone for that.


r/Autobody • • Feb 28 '23

How much would this salvage car cost to fix the quarter panels?

Post image
0 Upvotes

r/Autobody • • May 10 '25

Acceptable quality? Is this panel properly blended?

Thumbnail
gallery
2 Upvotes

This started as a door ding. The tech said I got a custom finish that’s used on Cybertrucks.

He said it usually costs lots extra and he’s the only guy trained to do it.

He says I’m getting a special Mother’s Day deal. I’m not so sure.


r/Autobody • • Sep 13 '26

Project time! DIY rust repair, how am I doing.

Thumbnail
gallery
0 Upvotes

2006 towncar. 131k. Got a good deal on it. Knew about the rust. Knew I wasn’t paying shop rates on a car at this value. Decided to DIY. Curious how the experts think it’s going and if you have any helpful advice as I get into the body molding.


r/Autobody • • Jul 05 '25

HELP! I have a question. A big dent should i pull out by myself or leave it to pro

Post image
0 Upvotes

Hey so i had a bit of a slide this winter and bent a rear quarter on this car. Any ideas for a diy pull out or should i give it to a pro since i have a solid 1-2cm gap between the door and the panel right now. A method of using a pet bottle didnt work.


r/Autobody • • May 08 '26 Popcorn

HELP! I have a question. No experience but I’d like to try and see how f I’m able to cut the quarter off myself

Thumbnail
gallery
69 Upvotes

By the looks of these pictures how bad is the inner structure I know by the door it looks bad but would I need a new skin or need a whole new quarter panel with the inner structure


r/Autobody • • Apr 11 '26

Acceptable quality? I just got my car repainted, is this too much orange peel?

Thumbnail
gallery
1 Upvotes

Hello,

I just got my car repainted for the small dents and scratches I had all around.

However, when I got it back, I noticed that it had very noticeable orange peel on all the newly painted panels

Shop offered to polish it, but it barely made any difference

I would like to know your opinions, I am going back to tje shop on monday for some work they forgot, and want to confront them about it.

Thank you in advance

TLDR; Car repainted, is this bad quality / too much orange peel?


r/Autobody • • Mar 30 '25

HELP! I have a question. can i make these scratches to my boyfriends car

Thumbnail
gallery
5 Upvotes

how bad are these paint scratches and transfers in and on my boyfriends leased car? i would prefer for him not to know but saving face is not worth causing permanent damage. would you recommend trying diy stuff or just coming clean? it’s not like he’s going to inspect the car so the just need be passable. he is out of town til next week.


r/Autobody • • Jan 08 '26

Project time! Candy Green Yamaha R7 tank process

2 Upvotes

Process of a candy green base coat on this R7 Yamaha


r/Autobody • • Jun 27 '25

HELP! I have a question. Is this enough? First time

Thumbnail
gallery
0 Upvotes

I wanna do it myself and make it look as good as possible.


r/Autobody • • Jan 22 '25

HELP! I have a question. Can it be worth it to buy a salveged 2014 Audi A6 3.0 TFSI quattro?

Thumbnail
gallery
0 Upvotes