r/AskEngineers • • 6d ago

Discussion Career Monday (09 Nov 2026): Have a question about your job, office, or pay? Post it here!

4 Upvotes

As a reminder, /r/AskEngineers normal restrictions for career related posts are severely relaxed for this thread, so feel free to ask about intra-office politics, salaries, or just about anything else related to your job!


r/AskEngineers • • 11h ago

Discussion Call for engineers willing to be interviewed (15 Nov 2026)

20 Upvotes

If you're looking for engineers to interview for a school assignment or for your job hunt, this is the right place! The AskEngineers community has compiled a list of hundreds of practicing engineers across different countries, industries, and specializations to help answer your questions about what they do in their job, how they got there, and offer career advice to those that need it.

Note: Please be courteous when requesting an interview. Everyone on the list is doing it on a volunteer basis only, and they are not obligated to respond or help you. Our users reserve the right to deny any requests for interviews and/or personal information. Harassment will not be tolerated and will be reported to the authorities.

How to use this list

  1. Ctrl + F
    the engineering discipline, country (e.g. US, UK, Germany, etc.), or other criteria you're looking for looking for. If you need to be able to verify someone's identity, search for Available for e-mail?: yes

  2. Parse through each search result and message up to 3 users that you think will be able to answer your questions. DO NOT shotgun PMs to every user! If you don't intend to interview everyone, don't waste their time by sending messages that you won't respond to later.

  3. If the first few users don't respond within 24 hours, try messaging another user.

Interested in conducting interviews?

By signing up, you're volunteering to let high school students, prospective engineers, and new graduates PM or e-mail you with interview questions. Typically with students it will be for a class assignment (i.e. Intro to Engineering), so questions will be about about work, how you got into engineering, "do you have any advice for...", etc. Think of yourself as a STEM Ambassador.

You will receive anywhere from 1-4 requests per month on average, with some surges in January, July, August, and December due to new and graduating students. While these lists usually have over 100 sign-ups and is set to contest mode, which prevents the same users from getting bombarded with requests, engineers in an in-demand discipline may get more requests than average.

Requirements

  1. At minimum, you should have:

  • a BS / B.Sc in engineering or engineering technology, or an equivalent amount of self-study, and;

  • at least 3 years of professional engineering experience

  1. Commit to answering at least two interview requests per month. Don't list your information if you aren't willing to volunteer roughly ~2 hours per month to conduct interviews.

How much time does it take?

The first interview you do will take about 1 hour, depending on how detailed you are. After that, most interviews will take < 30 minutes because you can copy-paste answers for repeat or very similar questions. That said, please be sure to read every question carefully before using previously written answers.

How do I sign up?

Copy the template below and post a top-level comment below. Note: "Available for e-mail" means you're OK with the interviewer sending you a personal e-mail to conduct the interview, usually for verification purposes. If you want to stick to reddit PM only, answer 'no' to this question.

This is purely on a volunteer basis. To opt out, delete your comment here below. Once deleted, you will no longer receive requests for interviews.

This template must be used in Markdown Mode to function properly:

**Discipline:** Mechanical

**Specialization:** Power Turbines

**Highest Degree:** MSME

**Country:** US

**Available for e-mail?:** yes/no

r/AskEngineers • • 5h ago

Mechanical Can you use periscope with thermal vision camera? And why is it not more common with regular infrared cameras?

5 Upvotes

I was thinking with armored combat you might want to hide expensive image sensor inside vehicle and only expose a lens and a mirror via periscope. Why is this not done more often and can this be done with thermal vision as well?


r/AskEngineers • • 17h ago

Civil Why arent thermochromic paints a thing for houses?

22 Upvotes

From an energetic perspective it would make sense to paint a house white in summer and black in winter. Of course painting a house twice a year doesent make sense. But we have pigments that change colour depending on temperature.So there has to be a catch, right?

Ist it price? UV/Wheather resistance? Do we lack a usefull color combination? Or is the changeover temperature unfit?

Im curious and im sure its obvious if you got knowledge about thermochromic pigments :D


r/AskEngineers • • 1h ago

Discussion Course and materials guide to learn how to use esp32's and other related electronics?

0 Upvotes

Hi, I'm a first-year biomedical engineer in Canada, and I know that a lot of biomedical applications have electronic components to them. I've been seeing a lot of videos on Instagram of people building cool little projects like desk buddies, moisture sensors for plants, and Spotify displays on what appear to be ESP32s. (examples below) I'm mainly looking to learn something over the summer when I'm off school because I find this topic interesting, not necessarily for career purposes. I'm not familiar with electronics at all whatsoever, so I'm a little lost as to what I should be looking up to find out about, both what materials I need to order and courses that I can take to actually learn how these things work. I have a few main questions:

  1. (To your knowledge) Are there any colleges/universities in Canada that offer a class/certificate on this specific topic? Can it be taken online?

  2. Are Arduino, Raspberry Pi, and ESP32 the same thing? Is one thing more valuable to know than the other?

  3. What should I look into buying in order to familiarize myself with this topic? I'm aware there are different sensors and stuff. I'm willing to pay for the education and the pieces.

Im just completely clueless in this topic so any guidence is appreciated.

Example one of what I've been seeing

https://www.instagram.com/reel/DfbZwCaxDdo/?utm_source=ig_web_copy_link&xtok=MzRlODBiNWFlZA==&srtk=MzRlODBiNWFlZA==

Example two

https://www.instagram.com/reel/DeNBCvTqggy/?utm_source=ig_web_copy_link&cplk=MzRlODBiNWFlZA==&srtk=MzRlODBiNWFlZA==


r/AskEngineers • • 9h ago

Mechanical How should I attach my 3D printer to my lasercutter's ventilation system?

2 Upvotes

Earlier this year, I purchased a small lasercutter (Acmer P2), and I had to build my own enclosure for it as they did not have one that could fit it with the extension kit attached. The enclosure I made feeds directly into a standard air filter, through a flexible air duct into a fan (AC Infinity Cloudline Pro S6), finally passing through another flexible air duct to the window.

I'm planning on buying a 3D printer soon (Bambu X2D), and I'd like to hook it up to the ventilation system I've already built for my lasercutter. However, I'm not 100% sure how I should go about doing that such that fumes from the lasercutter don't go into the printer and vice-versa. My gut feeling is to connect it between the standard air filter and the fan and to make sure the fan's running whenever either device is active, but I'm not sure if I should do more (e.g. install blast gates on either input side of the T-junction to improve airflow to the device being used by sealing off the other one). Any advice would be appreciated.

(Automod said to say I'm from Canada, though I doubt that'll be relevant)


r/AskEngineers • • 9h ago

Electrical Building DC resistive load banks for battery/charger testing ;what components do I need and where do I source them

1 Upvotes

Hi all, I'm planning to assemble DC resistive load bank for battery discharge and battery charger testing. I'm trying to work out the full parts list and where to buy the raw materials.

What I have so far in mind:
Resistive elements (stainless steel or nichrome grids/coils?)
Enclosure/frame
Cooling fans and motors
DC contactors/switches and fuses or breakers
Control panel, metering (voltage/current), and protection (over-temp, fan failure)
Terminals and cabling
A few questions:
Am I missing any key components?
What material is best for the heat-dissipating elements? I assumed copper/aluminium, but I've read they're not ideal for the resistive part. Is aluminium just for fins and heat sinks?

Any experts in this field , please give advice.


r/AskEngineers • • 1d ago

Mechanical Looking for a 1200lbs electric motor specs for acart?

9 Upvotes

I'm looking to build an add-on electric motor to my traveling work cart, the castors are built to a limit of 1200lbs and I'd like to put a motor on with the same load capacity. I want to note that my load is not near that high but I'd like to over engineer this part so that I don't have to worry about moving the cart.


r/AskEngineers • • 2d ago

Electrical Touch lamp rapidly flickers when repeatedly operating a nearby lava lamp's mechanical switch – what could explain this?

6 Upvotes

I’ve experienced something quite unusual tonight and I’m interested to hear what people with electrical or electronics knowledge make of it.

I had a touch-sensitive lamp sitting approximately one foot away from a lava lamp. Neither lamp was touching the other, and there were no cables or other physical connections between them.

Both lamps were plugged into adjacent wall sockets.
The lava lamp had been switched on and heating for approximately six hours. When I went to switch it off, I used the mechanical rocker switch attached to its power cable.

In an ADHD moment, I ended up repeatedly flicking the lava lamp’s switch on and off several times.
During this, I noticed that the touch lamp started flickering.

A few details about what happened:
The touch lamp was initially switched off, but its power supply at the wall was still on. It was therefore powered and ready to be activated by touch.
The touch lamp did not turn on or change its normal operating state.

Instead, it produced multiple extremely rapid flashes of light and remained switched off afterwards.
The flickering was much faster than the normal response when activating the lamp by touching it.
I estimate it happened after approximately 6–7 operations of the lava lamp’s switch.
It didn’t happen with every individual flick of the switch.

I stopped and asked my wife to watch. I repeated the experiment, and the same thing happened again.
We also established that tapping the touch lamp itself did not reproduce the same rapid flickering.
The lamps were approximately one foot apart throughout, with no physical contact or connection between them other than being plugged into adjacent wall sockets.

I don’t currently know whether the touch lamp has an LED bulb but it’s definitely a replaceable one.

I’m genuinely interested in understanding what could cause this.

Has anyone experienced something similar, or can anyone explain what might be happening from an electrical engineering or electronics perspective?
I’m particularly interested in scientific explanations rather than paranormal suggestions or speculation. I’d also appreciate any suggestions for how this could be investigated properly.

Small disclaimer: I’ve used AI to help organise and construct this post because I have dyslexia and sometimes struggle to put detailed observations into written form. Everything described above is my own experience and observations.

Will look to maybe add photos of the lamps tomorrow
Edit: in uk 🇬🇧
Thanks!


r/AskEngineers • • 2d ago

Mechanical Home brew tracked vehicle. How hard can it be?

7 Upvotes

Just pipe dreaming but I've built a lot of nonsense and a tracked vehicle is something I'm kind of obsessed with.

I figured if it were to happen, a clapped out bulldozer would be the donor for tracks and drive sprockets and some other running gear. The vehicle itself would be some sort of pickup truck or other full framed vehicle. I was thinking I could steer it by the use of two cutting brakes, one on each side of the rear axle but I don't know if this would mess up a differential.

I'd want to be able to cruise at 20 MPH and I'd definitely want suspension. I think MacPherson struts and control arms could be repurposed into a sort of ad hoc Christie suspension setup...Kinda...

I'm pretty hung up on the idea of steel track links instead of a conveyor belt type of setup. I think I'd need some serious gear reduction but a 4WD pickup would have low range on the transfer case.

I don't know the difference between a bulldozer track vs. a battle tank track.

I do know that tracked vehicles are going to be much more complex even maintaining it let alone building something that may get half a mile before throwing a track or some other sort of breakage.

Not at all likely to happen for lack of even money to piss away on a derelict dozer but Man does it keep me up at night.


r/AskEngineers • • 2d ago

Discussion Parking garage repair question: what are they repairing?

5 Upvotes

My dad (now deceased) was a structural / civil engineer, and I'd often ask him questions about stuff that intrigued me. In my city, I'd been hearing jackhammering in a pretty big multi-level parking garage. This went on for weeks, and I'm a curious sort. The repairs are confusing: MANY small (1'x1' ish, but some more like 2'3') rectangular hold dug out and re-filled on the parking deck. It was loud, so I never asked the workers. Any ideas what the problem was, based on these pics?

The 1st one shows the repair, the 2nd one I'm not sure what's happening (maybe where they will repair later?), and the 3d shows some kind of tape (?) on the beams below the deck.

Thanks.


r/AskEngineers • • 2d ago

Mechanical how do two spinning things make a square?

13 Upvotes

is this video fake or is there a way to make a square with rotating the tool and the workpiece? https://i.imgur.com/wTjIKdC.mp4
it looks like the two are coupled too via the the shaft in the background, i swear this breaks my brain...

edit: after being given the name "polygonal turning" i found found this neat 1min explanation video: https://youtu.be/-C-wuLLZqeA

edit2: apparently this is not a new process by any means either: "The Polygonal Turning Corporation of Marquette, Michigan manufactured shaped joinery products for domestic use during the 1890s.[3]" from: https://en.wikipedia.org/wiki/Polygonal_turning


r/AskEngineers • • 3d ago

Mechanical Bolt extraction: Is a really big wrench or an impact gun at a bigger risk of stripping the treads out?

9 Upvotes

I have a problem: An overtightened M16x1.5 bolt in a very expensive hole. The bolt is steel and I think the threads are steel too. Lubricated threads.

Simple question that Id like an engineering answer to: Should I use a really long wrench to loosen it (3ft+)? Or an impact gun. Which has the greater chance of stripping the threads out?

As a bolting engineer, I can make an argument for both:

  1. There is a pretty big out of axis force from the wrench, so its a turn and twist. More forces levering on the hole.

  2. Purely a moment on the bolt, no off-axis forces. But the sudden impact shocks are more prone to galling type issues.

No idea how over-tightened the bolt was. At least 3x the torque spec. Maybe more. But no idea if the bolt has yielded and the threads are stretched or hole threads have stared to shear. Due to the nature of the hole, Im guessing the hole threads would go first.


r/AskEngineers • • 3d ago

Mechanical How to make a bicycle rig for an indie movie?

9 Upvotes

I'm a writer/director making my first feature film in japan. It's a a movie about two guys cycling through the countryside, a buddy movie like Plane's Trains and Automobiles but set in Japan with a young American guy and old Japanese guy not getting along, but then getting along.

We have a major japanese star set to play the old Japanese man. The only issue, he's over 70 and doesn't want to ride a bike. He's terrified especially of road bikes, which is required for the story. This is unfortunate for us! Especially on a tiny budget, we can't fake it with VFX or blue screen etc... it would look terrible.

So what I want to do, is build a trailer/rig that attaches to the fork of the bike, and allows it to be pulled behind a car, or even better, small three wheeled scooter or motorbike. We can film with this and easily remove the rig in VFX, or just shoot with a body double for wide shots, and use the rig for medium/close ups.

The trick is, bicycles tilt constantly while being ridden, especially while going around corners or even just pedalling hard, and without that motion, the actor won't look natural in medium shots wher eyou can see the bike at the bottom of the frame.

I found this rig that a company in England makes, it looks great, you can see in the video that tilting works, but it's way too big and expensive of a thing. We need something much simpler, cheaper, and smaller, that can be loaded into a car. I'm thinking if we attached a similar rig from a three wheeled scooter (common in japan, the extra wheel giving more side to side balance)

https://www.bickers.co.uk/tracking_equipment/extended-a-frame-2/

We found a fabricator in Osaka who usually builds bike frames whose willing to build something for us. But I'd like a real mechanical engineer to help us design it. We don't have a huge budget.

What do ya'll in this forum recommend I do? How can I hire a mechanical engineer for just such a small task on such a tiny budget?

You can read more about the film here if you're curious:

https://myoyaji.com


r/AskEngineers • • 2d ago

Discussion French Supermarket Cyberattacks and HVAC

0 Upvotes

Hi,

Following the recent cyber attack in France which caused refridgerators to be put in defrost to spoil the food, I was wondering if building heating systems are also susceptible to this.

Anyone know if most building have physical failsafes or countermeasures, or if they're not even hooked up to remote controls for example? Or maybe its not a real danger and theyre not capable of doing that much? (If this is a company secret then maybe a yes/ no could work).

As an aside, I always imagined if powerful heating systems were invented they would be risky since there's this sort of danger. It also seems many people are preoccupied with making technology and not asking if they should make technology, as has always been the case... And some people (the people at the top usually) make them with with no regard for the effects, and they will be used for profit in whatever form that takes. (Hopefully ethical-related discussions are ok for this sub - as a graduate I'm tying to not be cynical but I've heard shocking things already). Is this a cynical representation of these companies/ governments or just realistic?

Thanks


r/AskEngineers • • 2d ago

Electrical What servomotor and drive setups do you use?

0 Upvotes

Those of you who use servomotors and motor drives, what do you use and how satisfied are you with thier performance? Thanks a lot.


r/AskEngineers • • 3d ago

Electrical I'd like to turn my stationary bike pedaling into in-game movement with an optical sensor rig.

2 Upvotes

The concept is super simple, and I'm surprised I haven't seen it as a modular product before.

But essentially it would be a piece of gaffer's tape for visible texture on the axle, a fixed optical sensor (such as a gaming mouse's) watching the axle's spin speed and direction, feed it through a dev board (ESP-32-S3 seems the choice) so it can be programmed and optimized for game needs, and ultimately USB'd to my desktop.

What optical sensor would be the best fit for this concept?


r/AskEngineers • • 3d ago

Mechanical Cheap and reliable way to continuously monitor load on a stepper motor?

0 Upvotes

I'm looking for an inexpensive and reliable way to continuously monitor the mechanical load on a NEMA 17 stepper motor connected to a 5.18:1 reduction gearbox.

The motor operates at relatively low speeds and frequently changes direction. I don't need highly accurate torque measurements in N·m, just a consistent indication of how much load the motor is experiencing so I can detect increases in resistance before it stalls.

I'm currently using a TMC2209 driver with an ESP32.

I've considered a few options:

- StallGuard4: Seems promising, but from what I've read, it's unreliable at low speeds.

- Current sensing: I've previously used current sensors with servos to detect increased mechanical load, but I understand that stepper drivers regulate winding current, making this more difficult.

- Rotary torque sensors: Would be ideal, but commercial options seem far too expensive.

- Flexible shaft coupler: Possibly measuring torsional deflection to estimate torque, although I'm unsure how practical or accurate this would be.

- Load cell: Measuring reaction torque could work, but I'd prefer something compact that doesn't require significantly modifying the motor mounting arrangement.

I'm trying to keep the cost as low as possible, ideally under $20–30 CAD.

Has anyone implemented a cheap method for continuously estimating stepper motor load at low RPM, particularly with frequent direction changes?

I'm open to DIY solutions, additional sensors, or clever ways of using the existing driver. I don't need precision, just reliable and repeatable relative load measurements.


r/AskEngineers • • 3d ago

Discussion Is it possible to make glasses with a build in zoom funcion in to glass

0 Upvotes

I have a wuestion i am a 21 yerld guy with bad eyesite is it possible to make glasses with a build in zoom funcion in the glass for my eyes to zoom in on an object or small letters so that i can see it or read the small letters ?


r/AskEngineers • • 5d ago

Electrical Are there antennas that can physically change their shape or characteristics to tune into different bands?

34 Upvotes

r/AskEngineers • • 4d ago

Mechanical Super minimal setup to make 2 discs spin in different directions.

0 Upvotes

Hi there, unsure if this is the right place to ask.

I am doing an art project where I have 2 identical discs cutout with trippy patterns, spinning in opposite directions. The discs will be sitting on top of each other, just moving in different directions to each other.

The outcome is a plethora of trippy patterns

What is a super minimal motor setup for me to achieve this. I am a complete noob and this is my first time attempting anything to do with motors or gears.

My friend also mentioned it would be cool to have one spin at a slower speed to the other to get even more patterns.

Cheers.

EXAMPLE:

https://www.instagram.com/reel/DfGTkxIPfDq/?rpxt=MXZjYXF2cm1jcXpxOQ==


r/AskEngineers • • 5d ago

Discussion Could this garbage-to-energy waste water system work in real life? (satisfactory mod)

4 Upvotes

I'm developing a Satisfactory mod based on a waste-to-energy facility, and I'd like some engineers to help me figure out whether the mechanics would actually work in real life.

Here's the proposed process:

  1. Municipal garbage is delivered to an industrial incinerator and burned to produce heat.

  2. That heat boils water in a boiler, creating high-pressure steam.

  3. The steam is sent through a turbine, which spins to generate electricity.

  4. After leaving the turbine, the steam goes through a condenser, where it cools back into liquid water.

  5. Meanwhile, the smoke and exhaust gases produced by burning the garbage are sent into a large wet-scrubbing chamber.

  6. Municipal greywater, such as wastewater from showers, sinks and laundry, is pumped into that chamber and comes into contact with the exhaust gases.

  7. The water captures certain pollutants and particles from the exhaust, creating contaminated scrubber wastewater.

  8. That wastewater is then sent through a treatment system to remove contaminants.

  9. I'm interested in whether the treated water could eventually be reused for industrial cooling.

The idea is to have one interconnected facility that handles garbage disposal, electricity generation, exhaust treatment and wastewater reuse.

Questions for engineers:

  • Would the steam turbine and condensation process work as described?

  • Could municipal greywater be used in a wet scrubber?

  • What happens chemically when garbage exhaust comes into contact with greywater?

  • Could the resulting wastewater realistically be treated for reuse?

  • Are there ways to recover additional heat from the process?

  • What would be the biggest efficiency losses?

  • Is there anything fundamentally wrong with this entire setup?

I'm developing this for a Satisfactory mod and want the machinery and production chain to be based on actual engineering rather than completely made-up mechanics.

Please explain things simply where possible. I'm genuinely interested in understanding what would and wouldn't work! I’m 13 years old I don’t know this super niche engineering term using in university of Miamis waste water treatment class


r/AskEngineers • • 5d ago

Mechanical Best way to use EDPM gasket to connect two parts that are intended to be waterproof

6 Upvotes

I have a PVC cylinder with 8 thermal set inserts that is meant to attach to an aluminum plate. Our design was to use a gasket with holes for the screws/inserts but we aren’t able to prevent leaks from where the fasteners are. Can provide more info in comments. Thank you.


r/AskEngineers • • 5d ago

Mechanical Advice on Creating Swinging Motion of Disneyland's Its a Small World Clock Facade

7 Upvotes

...

This year I am recreating this display again but I want to know what I need to give it the swinging motion, similar to how it operates at Disneyland.

I found this JQDML 24V Reciprocating Swing Motor on Amazon, but what exact parts do I need to connect the face to the machine?

Here is a diagram ChatGPT gave me of what I need. Uhh it was a disaster last year.

Thank you!


r/AskEngineers • • 6d ago

Electrical USB-C port receptacle design durability

18 Upvotes

I've always wondered how durable different ports are. How is it that the receptacle inside doesn't always snap? Given that most of the world is transitioning to USB-C, how durable/fragile is it compared to other ports?

Why is it superior to something like lightning where you eliminate the receptacle in the center?

Or am I thinking about it wrong? I read that the most fragile part are the spring contacts and in USB-C they are placed on the "cheap" cable not the device.