r/Androidheadunits • u/No-Tumbleweed-9501 • 2h ago
r/Androidheadunits • u/Mattmar96 • 9h ago
I installed a physical volume knob for my head unit
I found a simple USB volume knob on aliexpress and got it mounted up on my dashboard. Wired that up to the head unit and voila! I’ve had it setup for a couple months now and its a dream.
r/Androidheadunits • u/Legitimate-Guard6328 • 12h ago
Android auto freezing problem
My head unit its a octa core with 6gb ram and awalys worked fine, ive noticed last week this annoying problem were the music cuts and the map lags. Anyone facing the same situation?
r/Androidheadunits • u/cvaggelis95 • 14h ago
How to find aftermarket screen password?
reddit.comHELP please ✌🏻
r/Androidheadunits • u/Disastrous-Big-7549 • 14h ago
Help connecting CANbus to aftermarket Android head unit
Hi hi, hope y’all are doing well!
I recently bought a used Seat Ibiza, 2008, and it came with an aftermarket Android head unit. I was thinking of buying an OBD2 adapter to keep track of how many kilometres I have left, but I realised it has an installed CANbus and it’s being used by a “Car settings” section inside the settings app. The section in question is the one in the second picture. As you can see, it isn’t connected correctly as everything shows as zeros.
After checking the system info tab, picture 1, the CANbus model shows “Audi A3” and not Seat Ibiza. I figured that was the issue. I went to the factory settings tab, entered the PIN and tapped on “Protocol settings.” That’s where I could edit the CANbus decoder information (brand and car model). Its brand was set to Raise, so I didn’t change that. I searched for my car’s brand, however, and couldn’t find “Seat” or anything similar. I figured that it would be under “Volkswagen” as, at the time, they shared multiple parts.
That didn’t seem to work either though. I even clicked on “Default settings,” which changed the model back to an Audi A3. Does anyone have any ideas on how I can get it connected correctly, preferably without pulling out the screen to check what model is written on the decoder box?
I’d appreciate any bit of help, thank you regardless!
r/Androidheadunits • u/inverted-left-back • 14h ago
Has anyone tried the plug-and-play CarPlay units from Junsun, HIZPO, etc.? Factory radio is locked
also, does it need a dashkit as well, or just plug this and that's it? Thanks!
r/Androidheadunits • u/maym32 • 15h ago
Aerpro Head Unit
I have been using an Aerpro Head Unit with Android Auto for a few years with pretty much no problems. Now it will not let me use Google Assist to send a msg. It just keeps asking who do I want to msg. I have checked all my permissions are allowed and I have uninstalled the unit and paired it again. Nothing has helped. I would be grateful for any advice
r/Androidheadunits • u/maym32 • 15h ago
Aerpro Head Unit
I have been using an Aerpro Head Unit with Android Auto for a few years with pretty much no problems. Now it will not let me use Google Assist to send a msg. It just keeps asking who do I want to msg. I have checked all my permissions are allowed and I have uninstalled the unit and paired it again. Nothing has helped. I would be grateful for any advice
r/Androidheadunits • u/Doxastoel • 19h ago
2020 odyssey usb
In my 2020 odyssey the usb port for car play is craping out on me. Half the time i have to reach in and wiggly the cord or lean it a certain way to get it to work. I have cleaned it out vacuum, that keyboad cleaning stuff to make sure it wasnt a dirt issue but to no avail.
Is this an issue others have had? I cant find much online.
r/Androidheadunits • u/Just_Badger_4299 • 21h ago
Is Renault Easylink Android-based?
Hello!
I have a Renault Zoe with an Easylink head unit that seems to be a Bosch RM RNAIVI for which I cannot find much technical information.
My first question is the following:
Is that head unit Android-based?
If not, what platform? Linux maybe? Something else?
r/Androidheadunits • u/Just_Badger_4299 • 21h ago
Changer l’ordinateur de bord Easylink d’une Renault Zoe ?
r/Androidheadunits • u/norvur • 22h ago
Android Head Unit: Mekede DUDU7 or Junsun?
reddit.comr/Androidheadunits • u/norvur • 23h ago
Androidos autós fejegység: Mekede DUDU7 vagy Junsun?
reddit.comr/Androidheadunits • u/rewind22x • 1d ago
B4U Android/8227L/B9320B Head Unit info
Hopefully this info will help someone. I've been dinking around with this B4U Android based head unit (B0F8H9YV59). I bought it back in March of 2026 and yanked it out of my car by the end of July. It looks nice and mostly worked. The major issue with it is that the mic gain/sensitivity is way too low. I even hooked up my SM58 as an external mic and it's volume matched the internal mic. I don't like to particularly take calls while driving so it wasn't a deal-breaker, but using it for Google Assistant also suffered because of that. The deal-breaker was that by the middle of July, it was rebooting on it's own, way too often. So out it went and I picked up a SJoyBring (B0CT5P32L7) stereo/display that has worked relatively well.
I set the B4U unit on a shelf in my basement and forgot about it. I knew what risk I ran picking it up, so I wasn't that upset. Anyway, a week or so ago I saw some posts about folks pointing Claude at it and de-crapifying their units. So I decided to take a look at it and see if I could do a couple of things:
Debloat the device with hopes it would stabilize for normal usage
Improve microphone volume so that hands-free operation would be feasible (without yelling at my stereo)
So, not really knowing where to start, I dove into setting up LM-Studio on my computer, stumbled my way into setting up Cline in VSCode and connecting it to the model server hosted on LM-Studio. Then I would use Co-Pilot to help me form prompts. Yes, sounds pretty dumb.
According to the Amazon listing, this thing has 4GB RAM, an 8 core CPU, 64GB of storage, Android 13.
I wasted a bunch of time trying to get a Cline/AI diagnostic going. So I ditched that after a couple of evenings. I ended up using co-pilot for some advice at getting information and analyzing data.
I went over to this site https://s.xygala.com/login and used these credentials (xyauto:6823DK) to sign in and pull USB OTA images- which I ended up not needing- except to rescue myself from myself.
First, see what the actual hardware is. I installed "Device Info HW" and pulled some info:
Devicealps B9320B
Resolution 720x1280
Platform 8238
Android 13?
RAM 4GB
Flash Sandisk DA4064 64GB
CPU 8238 - armv71 4 cores
But some of those things were suspect, so I asked co-pilot for some commands to get a second opinion:
Where I ran into a roadblock - ADB access.
I needed to go into the Factory Settings, enter 8888 to access it, scroll down to USB settings and make sure that USB mode was set as 'device'.
I can't confirm this, but I read that you had to use a 4 pin USB header for ADB access - not the 6 pin. My 4 pin connector did not have a female USB-A connector - that was on the 6 pin connector; rather the 4 pin had a connector for my car. So I carefully pulled the pins from both connectors and moved the female USB A cable to the 4 pin.
I then needed a USB A to USB A cable to connect to my computer. I kept seeing online that you couldn't just splice the matching wires - that you had to take one cable and solder the ends to the "donor" USB A connector.
I just spliced the wires and it worked. Plugged things in, had to install some Android drivers and I was in business. But not only in business, but after running 'adb shell', I ran 'su' and had root. So that was a pretty nice break. So I got down to business getting info:
Platform: AC8227L
CPU Architecture: ARMv7 (32-bit)
CPU Cores: 4
RAM: 4 GB
Storage: 64 GB eMMC (confirmed)
Reported Android Version: 10.0
SDK Level: 27 (Android 8.1)
Security Patch: 2020-02-01
So, not Android 13, but Android 10, but not really as it's running sdk 27 - Android 8.1. I confirmed this again after attempting to install an .apk that required Android 9 as minimum and it failed. The CPU is a quad core - not and 8 core.
I haven't confirmed the storage by copying 40GB of data to it, but if I do, I'll post about it. yup, 64GB - or at least close enough.
I spent a few nights figuring things out, mainly looking for passwords in various apk's pulled from the device but here's the good stuff:
Accessing Engineer Mode:
I think this is where I can eventually increase the mic vol. If I use the built in Sound Recorder app, I've seen slight mic vol increases by adjusting this setting: EngineerMode > Hardware Testing > Audio > Normal Mode > Type: Mic, Level: Level 4, then adjust the "Value" my default is 192. Increasing to 255 barely does anything- even using an external mic.
If you try to open this from Factory Settings/USB Settings, it will throw a message saying you can't access it. Run this command via ADB to clear that message and access Engineer Mode: adb shell settings put global development_settings_enabled 1
Production Management
Not much here- Uses the same login as the website. Maybe an alternative for upgrading/updating.
USER:PASSWORD: xyauto:6823DK
Engineering Test Debugging
Found in Factory Settings/Parameter Setting at the bottom right
PASSWORD: 26959910
Enabling "Hidden Settings" ie. Android Developer Settings
Developer Settings is nowhere to be found. You can tap the Build section in About all you want but it won't appear.
I found this purely by accident. Still can't believe it. I just randomly tapped on the Engineering Settings header at the bottom of Factory Settings/Parameter Settings and up popped a password prompt. You have to tap 5 times to get this prompt. I still can't believe my dumb luck. I tried every password I could think of, every pin or password that has been posted and nothing worked. Got to work with Co-Pilot and we evaluated a couple of packages. Ended up using vdexExtractor and JADX to analyze PvCanset.vdex and found the password. I still can't believe I found it. I can't believe I'm not the only one who hardcodes passwords in their code. Ludicrous.
PASSWORD: ac92xy
Here you can enable OEM unlock and as far as I know it enabled fastboot and makes it possible (possibly) to unlock the bootloader.
I ran 'adb reboot bootloader' And got into the FASTBOOT mode. I ran 'fastboot getvar unlocked' next and got the result 'no' This command 'fastboot flashing get_unlock_ability' returned '(bootloader) unlock_ability = 16777216" Finally 'fastboot flashing unlock" and this appeared on screen:
Unlock bootloader?
If you unlock the bootloader, you will be able to install custom operating system software...
Yes (Volume Up): Unlock No (Volume Down): Do not unlock bootloader
But since there are no physical Vol+/Vol- buttons, I was out of luck- I think there are some pads on the pcb that i can try to solder wires/buttons to and try later.
I threw StrataOS on it and may eventually look around for packages/processes to remove.
These are pretty crap head units. I actually bought two more for my kids cars, but returned them before 30 days were up. Too late to return mine though- but thankfully mine started acting up in time. If I can get the mic to behave and get it working stable, it might go back into my Camry. Anyway, hope this helps someone in the future.
r/Androidheadunits • u/Spare-Dig9030 • 1d ago
Samsung and ottocast issue
Hi everyone i use a samsung a56 and my car is toyora cross 2021. I use ottocast for android auto. Before samsung i used a pixel 8A and it worked with ottofast flawlessly. Now with samsung it pairs with ottocast but does not show android auto on cars screen. Tried clearing cache and resetted ottocast. Nothing seems to work. Please help
r/Androidheadunits • u/Someguywhomakething • 1d ago
Steering wheel control - Display off/on
So this is strange. Install went fine, canbus adapter included, steering wheel controls work fine.
The only option in the SWC menu that doesn't work is the "DISP" option. It did work for the first day to turn off the display and then turn it back on. For some reason it doesn't work any more.
I know there are factory settings but nothing within the submenus looks like anything to do with this. Am I missing a common setting within the headunit? I know, I know there are thousands of custom firmware/roms being used by these Chinese factories, but maybe, in the off chance, there is a common setting across all these headunits that targets this.
Anyone have a thread I could chase down?
r/Androidheadunits • u/Honeyzuka33 • 1d ago
Junsun V7 for clio3 tomtom no Sound
I need help , I have a Junsun V7 (6GB/128GB) unit for a Clio 3—which originally had a Carminat TomTom system everything is okay but I am encountering four issues:
- There is no sound. The manual states that for an installation without RCA cables, a loose wire labeled "AMP CONT" should be connected to the red "ACC" (ignition) wire; however, no such wire exists.
- The ignition-switched power (ACC) is not working; the head unit remains powered on even after I turn off the ignition and remove the key.
- I performed a factory reset on the head unit, which caused some applications—such as Apple CarPlay—to disappear.
- Finally, the Wi-Fi does not work when using a hotspot from my phone; it displays an "error obtaining IP address" message. And also i cant see the speed of my car on the main page
r/Androidheadunits • u/Outside-Chip9390 • 1d ago
[App][Open Source] LiteDash - Free launcher for Android head units: your car in 3D, live OBD, tire pressure and a 3D map in under 2 MB
Hi everyone! I’m the developer of LiteDash, a launcher for Android car head units (and tablets). I started it because the stock launchers on these screens are slow and ugly.
Your car in 3D on the home screen: 16 models, any color (metallic finishes too), spin it with your finger.
Customize everything in seconds: 14 ready layouts, long-press to move and resize any widget, one-tap wallpapers or your own photo, dark/light/day-night theme and 10 accent colors.
Widgets that know your car: 8 speedometer styles, live OBD-II with any cheap ELM327 (car health, trouble codes, 20+ sensors and charts), tire pressure (USB TPMS kits, Bluetooth caps or your car’s own sensors), weather, trip, music and radio.
3D map that follows your heading like Waze, with street names and offline areas up to 200 km. One tap opens Waze or Google Maps.
Factory radio and Bluetooth supported: TopWay (TS10/TS18), FYT, NWD, HCN, Microntek, Autochips, Clinkway, Jancar and Reglink. The list grows every week thanks to your reports. If yours isn’t there, send a report from Settings and I’ll add it.
Tiny: the whole app is 1.9 MB and runs on Android 6+.
100% free, no ads, no account, open source (GPL-3.0). 172 releases since Oct 31, and 2,600+ head units already run it.
🌐 Website (APK download): https://litedash.dev
▶️ Google Play: https://play.google.com/store/apps/details?id=com.irvingguerra.litedash
💻 Source code: https://github.com/IrvingGuerra/litedash (a ⭐ helps a lot!)
🚗 Want your car in 3D? Ko-fi supporters get priority on car requests, and I’ll ask for photos of your car: https://ko-fi.com/irvingguerradev
What head unit and car do you have?
r/Androidheadunits • u/castlemilklad02 • 1d ago
Is it possible to add an android auto screen to a 2012 mini cooper?
reddit.comr/Androidheadunits • u/MakingMov3s • 1d ago
Driauto 9" 4GB + 128GB Android Car Radio for the 2009 Toyota Matrix S not connecting android auto.
I recently ordered and installed this radio it worked fine upon install and later that day it stopped connecting and now is asking for an activation code. In addition it shows and error code " no mfi chip".
What are my options ?
r/Androidheadunits • u/skikibobski • 1d ago
Bricked unit recovery?
I think I've bricked my unit after trying to flash incompatible firmware.
What are the chances of me being able to reset it and get it working again?
I bought the car with it already installed so I don't know much about it.
I did manage to get hold of the previous owner, so I at least know what the product name is.
It's a 9" EZoneTronics octa-core with 2GB RAM and 32GB ROM.
There's a pinhole reset button, but I've tried pressing and holding for different amounts of time without any effect.
When I turn the ignition, the screen comes on and the Peugeot logo appears, then slowly fades away and then nothing. Every now and then while driving it repeats the same behaviour, so I'm guessing it reboots. Seems to happen irregularly though, and could be at least 10-15 minutes between.
r/Androidheadunits • u/WeakAppointment1379 • 1d ago
Stuck on Reverse Display
Hi my head unit is stuck at reverse cam and I cannot even click on anything to go back to the launcher/menu.
I have tried hard resetting but this display shows up after a few seconds from reboot.
What should I do? Thanks in advance!
r/Androidheadunits • u/MaterialLog417 • 1d ago
Crappy microphone in head units using CarPlay answering the phone.
So any head unit you buy comes with a crappy microphone, is there any solution for this issue ?